[PATCH v2 3/3] riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader

[E Shattow]

On 8/17/25 23:05, Hal Feng wrote:
>> On 15.08.25 15:37, E Shattow wrote:
>> Add bootph-pre-ram hinting to jh7110.dtsi:
>>   - CPU interrupt controller(s)
>>   - core local interrupt timer
>>   - DDR memory controller
>>   - oscillator
>>   - syscrg clock-controller
>>
>> Signed-off-by: E Shattow <e at freeshell.de>
>> ---
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> index 14df3d062a45..884a3526cb0f 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> @@ -35,6 +35,7 @@ S7_0: cpu at 0 {
>>
>>  			cpu0_intc: interrupt-controller {
>>  				compatible = "riscv,cpu-intc";
>> +				bootph-pre-ram;
>>  				interrupt-controller;
>>  				#interrupt-cells = <1>;
>>  			};
>> @@ -68,6 +69,7 @@ U74_1: cpu at 1 {
>>
>>  			cpu1_intc: interrupt-controller {
>>  				compatible = "riscv,cpu-intc";
>> +				bootph-pre-ram;
>>  				interrupt-controller;
>>  				#interrupt-cells = <1>;
>>  			};
>> @@ -101,6 +103,7 @@ U74_2: cpu at 2 {
>>
>>  			cpu2_intc: interrupt-controller {
>>  				compatible = "riscv,cpu-intc";
>> +				bootph-pre-ram;
>>  				interrupt-controller;
>>  				#interrupt-cells = <1>;
>>  			};
>> @@ -134,6 +137,7 @@ U74_3: cpu at 3 {
>>
>>  			cpu3_intc: interrupt-controller {
>>  				compatible = "riscv,cpu-intc";
>> +				bootph-pre-ram;
>>  				interrupt-controller;
>>  				#interrupt-cells = <1>;
>>  			};
>> @@ -167,6 +171,7 @@ U74_4: cpu at 4 {
>>
>>  			cpu4_intc: interrupt-controller {
>>  				compatible = "riscv,cpu-intc";
>> +				bootph-pre-ram;
>>  				interrupt-controller;
>>  				#interrupt-cells = <1>;
>>  			};
>> @@ -321,6 +326,7 @@ mclk_ext: mclk-ext-clock {
>>
>>  	osc: oscillator {
>>  		compatible = "fixed-clock";
>> +		bootph-pre-ram;
>>  		clock-output-names = "osc";
>>  		#clock-cells = <0>;
>>  	};
>> @@ -354,6 +360,7 @@ soc {
>>  		clint: timer at 2000000 {
>>  			compatible = "starfive,jh7110-clint", "sifive,clint0";
>>  			reg = <0x0 0x2000000 0x0 0x10000>;
>> +			bootph-pre-ram;
>>  			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc
>> 7>,
>>  					      <&cpu1_intc 3>, <&cpu1_intc 7>,
>>  					      <&cpu2_intc 3>, <&cpu2_intc 7>,
>> @@ -376,6 +383,7 @@ memory-controller at 15700000 {
>>  			compatible = "starfive,jh7110-dmc";
>>  			reg = <0x0 0x15700000 0x0 0x10000>,
>>  			      <0x0 0x13000000 0x0 0x10000>;
>> +			bootph-pre-ram;
>>  			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
>>  			clock-names = "pll1_out";
>>  			resets = <&syscrg JH7110_SYSRST_DDR_AXI>, @@ -
>> 892,6 +900,7 @@ qspi: spi at 13010000 {
>>  		syscrg: clock-controller at 13020000 {
>>  			compatible = "starfive,jh7110-syscrg";
>>  			reg = <0x0 0x13020000 0x0 0x10000>;
>> +			bootph-pre-ram;
>>  			clocks = <&osc>, <&gmac1_rmii_refin>,
>>  				 <&gmac1_rgmii_rxin>,
>>  				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> 
> pllclk also needs to add bootph-pre-ram. Because it is the dependency of syscrg.
> 
> 		pllclk: clock-controller {
> 			compatible = "starfive,jh7110-pll";
> +			bootph-pre-ram;
> 			clocks = <&osc>;
> 			#clock-cells = <1>;
> 		};
> 
> Best regards,
> Hal

What users are there for 'pllclk' at U-Boot SPL phase? There does not
seem to be any difference in testing U-Boot and Linux with or without
this hint for 'pllclk'.

Thanks,

-E