[RFC PATCH 2/8] dt-bindings: display: add versilicon,dc

[Rob Herring (Arm)]

On Fri, 15 Aug 2025 00:40:42 +0800, Icenowy Zheng wrote:
> Verisilicon has a series of display controllers prefixed with DC and
> with self-identification facility like their GC series GPUs.
> 
> Add a device tree binding for it.
> 
> Depends on the specific DC model, it can have either one or two display
> outputs, and each display output could be set to DPI signal or "DP"
> signal (which seems to be some plain parallel bus to HDMI controllers).
> 
> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> ---
>  .../bindings/display/verisilicon,dc.yaml      | 127 ++++++++++++++++++
>  1 file changed, 127 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Lexical error: Documentation/devicetree/bindings/display/verisilicon,dc.example.dts:41.28-52 Unexpected 'TH1520_RESET_ID_DPU_CORE'
Lexical error: Documentation/devicetree/bindings/display/verisilicon,dc.example.dts:42.22-45 Unexpected 'TH1520_RESET_ID_DPU_AXI'
Lexical error: Documentation/devicetree/bindings/display/verisilicon,dc.example.dts:43.22-45 Unexpected 'TH1520_RESET_ID_DPU_AHB'
FATAL ERROR: Syntax error parsing input tree
make[2]: *** [scripts/Makefile.dtbs:132: Documentation/devicetree/bindings/display/verisilicon,dc.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1527: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250814164048.2336043-3-uwu@icenowy.me

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.