[PATCH 1/2] dt-bindings: usb: dwc3: add support for SpacemiT K1

[Rob Herring (Arm)]

On Mon, 28 Apr 2025 15:38:11 +0800, Ze Huang wrote:
> Add support for the USB 3.0 Dual-Role Device (DRD) controller embedded
> in
> the SpacemiT K1 SoC. The controller is based on the Synopsys DesignWare
> Core USB 3 (DWC3) IP, supporting both Host and Device modes for USB 3.0
> and USB 2.0 standards.
> 
> Signed-off-by: Ze Huang <huangze at whut.edu.cn>
> ---
>  .../devicetree/bindings/usb/spacemit,k1-dwc3.yaml  | 95 ++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.example.dtb: usb at c0a00000 (spacemit,k1-dwc3): Unevaluated properties are not allowed ('interconnect-names', 'interconnects' were unexpected)
	from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250428-b4-k1-dwc3-v2-v1-1-7cb061abd619@whut.edu.cn

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.