[PATCH v2 3/6] riscv: dts: spacemit: add PWM support for K1 SoC

[Uwe Kleine-König]

Hello,

On Sun, Apr 20, 2025 at 03:02:48PM +0800, Guodong Xu wrote:
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index c0cc4b99c935..e7dba623e877 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -556,5 +556,185 @@ sec_uart1: serial at f0612000 {
>  			reg-io-width = <4>;
>  			status = "reserved"; /* for TEE usage */
>  		};
> +
> +		pwm0: pwm at d401a000 {
> +			compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
> +			reg = <0x0 0xd401a000 0x0 0x10>;
> +			#pwm-cells = <1>;

I want to make all pwms use #pwm-cells = <3> in the long run. Can you
please use that for the new binding? (Of course this needs adaption in
the binding doc, the code should already be prepared for that.)

> +			clocks = <&syscon_apbc CLK_PWM0>;
> +			resets = <&syscon_apbc RESET_PWM0>;
> +			status = "disabled";
> +		};

The error that the build bot reports happens (I think) because CLK_PWM0
isn't known.

Best regards
Uwe
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20250424/d3a3699d/attachment.sig>