[PATCH] riscv: dts: starfive: jh7110-common: use macros for MMC0 pins

[Icenowy Zheng]

The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
associated with starfive,jh7110-pinctrl .

Include the header file and use these names instead of raw numbers for
defining MMC0 pinmux.

Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
---
This is only a prettying commit. The resulting DTB files have the same
content with or without this patch (verified by doing sha256sum on
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb).

 .../boot/dts/starfive/jh7110-common.dtsi      | 21 ++++++++++---------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c2f70f5e2918f..a2c72b385a905 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -8,6 +8,7 @@
 #include "jh7110.dtsi"
 #include "jh7110-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
 
 / {
 	aliases {
@@ -428,16 +429,16 @@ GPOEN_ENABLE,
 		};
 
 		mmc-pins {
-			pinmux = <PINMUX(64, 0)>,
-				 <PINMUX(65, 0)>,
-				 <PINMUX(66, 0)>,
-				 <PINMUX(67, 0)>,
-				 <PINMUX(68, 0)>,
-				 <PINMUX(69, 0)>,
-				 <PINMUX(70, 0)>,
-				 <PINMUX(71, 0)>,
-				 <PINMUX(72, 0)>,
-				 <PINMUX(73, 0)>;
+			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
+				 <PINMUX(PAD_SD0_CMD, 0)>,
+				 <PINMUX(PAD_SD0_DATA0, 0)>,
+				 <PINMUX(PAD_SD0_DATA1, 0)>,
+				 <PINMUX(PAD_SD0_DATA2, 0)>,
+				 <PINMUX(PAD_SD0_DATA3, 0)>,
+				 <PINMUX(PAD_SD0_DATA4, 0)>,
+				 <PINMUX(PAD_SD0_DATA5, 0)>,
+				 <PINMUX(PAD_SD0_DATA6, 0)>,
+				 <PINMUX(PAD_SD0_DATA7, 0)>;
 			bias-pull-up;
 			drive-strength = <12>;
 			input-enable;
-- 
2.49.0