[PATCH v11 4/5] pwm: sifive: Fix rounding issues in apply and get_state functions

[Nylon Chen]

Fix PWM apply and get_state rounding to ensure consistency between
setting and reading values

This fixes the reported errors:
pwm-sifive 10021000.pwm: .apply is supposed to round down
duty_cycle (requested: 360/504000, applied: 361/504124)
pwm-sifive 10021000.pwm: .apply is supposed to round down
period (requested: 504000, applied: 504124)

Co-developed-by: Zong Li <zong.li at sifive.com>
Signed-off-by: Zong Li <zong.li at sifive.com>
Signed-off-by: Nylon Chen <nylon.chen at sifive.com>
---
 drivers/pwm/pwm-sifive.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index 6259f8500f71..1404c383461d 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -122,8 +122,8 @@ static int pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 		state->enabled = false;
 
 	state->period = ddata->real_period;
-	state->duty_cycle =
-		(u64)duty * ddata->real_period >> PWM_SIFIVE_CMPWIDTH;
+	state->duty_cycle = DIV_ROUND_UP_ULL((u64)duty * ddata->real_period,
+					     (1U << PWM_SIFIVE_CMPWIDTH));
 	state->polarity = PWM_POLARITY_NORMAL;
 
 	return 0;
@@ -157,7 +157,7 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * consecutively
 	 */
 	num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH);
-	frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
+	frac = num / state->period;
 	/* The hardware cannot generate a 0% duty cycle */
 	frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
 	inactive = (1U << PWM_SIFIVE_CMPWIDTH) - 1 - frac;
-- 
2.34.1