[PATCH v6 3/6] clk: spacemit: Add clock support for SpacemiT K1 SoC

[Yixun Lan]

Hi Inochi,

On 08:57 Thu 10 Apr     , Inochi Amaoto wrote:
> On Thu, Apr 10, 2025 at 08:54:51AM +0800, Inochi Amaoto wrote:
> > On Thu, Apr 10, 2025 at 12:37:56AM +0000, Yixun Lan wrote:
> > > On 14:37 Tue 08 Apr     , Alex Elder wrote:
> > > > On 4/1/25 12:24 PM, Haylen Chu wrote:
> > > > > The clock tree of K1 SoC contains three main types of clock hardware
> > > > > (PLL/DDN/MIX) and has control registers split into several multifunction
> > > > > devices: APBS (PLLs), MPMU, APBC and APMU.
> > > > > 
> > > > > All register operations are done through regmap to ensure atomiciy
> > > > > between concurrent operations of clock driver and reset,
> > > > > power-domain driver that will be introduced in the future.
> > > > > 
> > > > > Signed-off-by: Haylen Chu <heylenay at 4d2.org>
> > > > 
> > > > I have a few more comments here but I think this is getting very
> > > > close to ready.  You addressed pretty much everything I mentioned.
> > > > 
> > > > > ---
> > > > >   drivers/clk/Kconfig               |    1 +
> > > > >   drivers/clk/Makefile              |    1 +
> > > > >   drivers/clk/spacemit/Kconfig      |   18 +
> > > > >   drivers/clk/spacemit/Makefile     |    5 +
> > > > >   drivers/clk/spacemit/apbc_clks    |  100 +++
> > > > >   drivers/clk/spacemit/ccu-k1.c     | 1316 +++++++++++++++++++++++++++++
> > > > >   drivers/clk/spacemit/ccu_common.h |   48 ++
> > > > >   drivers/clk/spacemit/ccu_ddn.c    |   83 ++
> > > > >   drivers/clk/spacemit/ccu_ddn.h    |   47 ++
> > > > >   drivers/clk/spacemit/ccu_mix.c    |  268 ++++++
> > > > >   drivers/clk/spacemit/ccu_mix.h    |  218 +++++
> > > > >   drivers/clk/spacemit/ccu_pll.c    |  157 ++++
> > > > >   drivers/clk/spacemit/ccu_pll.h    |   86 ++
> > > > >   13 files changed, 2348 insertions(+)
> > > > >   create mode 100644 drivers/clk/spacemit/Kconfig
> > > > >   create mode 100644 drivers/clk/spacemit/Makefile
> > > > >   create mode 100644 drivers/clk/spacemit/apbc_clks
> > > > >   create mode 100644 drivers/clk/spacemit/ccu-k1.c
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_common.h
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_ddn.c
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_ddn.h
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_mix.c
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_mix.h
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_pll.c
> > > > >   create mode 100644 drivers/clk/spacemit/ccu_pll.h
> > > > > 
> > > > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > > > > index 713573b6c86c..19c1ed280fd7 100644
> > > > > --- a/drivers/clk/Kconfig
> > > > > +++ b/drivers/clk/Kconfig
> > > > > @@ -517,6 +517,7 @@ source "drivers/clk/samsung/Kconfig"
> > > > >   source "drivers/clk/sifive/Kconfig"
> > > > >   source "drivers/clk/socfpga/Kconfig"
> > > > >   source "drivers/clk/sophgo/Kconfig"
> > > > > +source "drivers/clk/spacemit/Kconfig"
> > > > >   source "drivers/clk/sprd/Kconfig"
> > > > >   source "drivers/clk/starfive/Kconfig"
> > > > >   source "drivers/clk/sunxi/Kconfig"
> > > > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> > > > > index bf4bd45adc3a..42867cd37c33 100644
> > > > > --- a/drivers/clk/Makefile
> > > > > +++ b/drivers/clk/Makefile
> > > > > @@ -145,6 +145,7 @@ obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
> > > > >   obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
> > > > >   obj-y					+= socfpga/
> > > > >   obj-y					+= sophgo/
> > > > > +obj-y					+= spacemit/
> > > > >   obj-$(CONFIG_PLAT_SPEAR)		+= spear/
> > > > >   obj-y					+= sprd/
> > > > >   obj-$(CONFIG_ARCH_STI)			+= st/
> > > > > diff --git a/drivers/clk/spacemit/Kconfig b/drivers/clk/spacemit/Kconfig
> > > > > new file mode 100644
> > > > > index 000000000000..4c4df845b3cb
> > > > > --- /dev/null
> > > > > +++ b/drivers/clk/spacemit/Kconfig
> > > > > @@ -0,0 +1,18 @@
> > > > > +# SPDX-License-Identifier: GPL-2.0-only
> > > > > +
> > > > > +config SPACEMIT_CCU
> > > > > +	tristate "Clock support for SpacemiT SoCs"
> > > > 
> > > > I don't know the answer to this, but...  Should this be a Boolean
> > > > rather than tristate?  Can a SpacemiT K1 SoC function without the
> > > > clock driver built in to the kernel?
> > > > 
> > > I agree to make it a Boolean, we've already made pinctrl driver Boolean
> > > and pinctrl depend on clk, besides, the SoC is unlikely functional
> > > without clock built in as it's such critical..
> > > 
> > 
> > I disagree. The kernel is only for spacemit only, and the pinctrl
> 
> Sorry for a mistake, this first "only" should be "not".
> 
> > should also be a module. It is the builder's right to decide whether
> > the driver is builtin or a module. In this view, you should always
> > allow the driver to be built as a module if possible.
> > 
No, we've already made pinctrl as Boolean (still depend on ARCH_SPACEMIT)
if people don't want this feature, he/she can disable CONFIG_ARCH_SPACEMIT

https://github.com/torvalds/linux/blob/master/drivers/pinctrl/spacemit/Kconfig#L7
-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55