[PATCH v6 5/6] riscv: dts: spacemit: Add clock tree for SpacemiT K1

[Alex Elder]

On 4/1/25 12:24 PM, Haylen Chu wrote:
> Describe the PLL and system controllers that're capable of generating
> clock signals in the devicetree.
> 
> Signed-off-by: Haylen Chu <heylenay at 4d2.org>

Other than the suggestion that you rename the "spacemit,mpmu"
property (mentioned in patch 3), this looks good to me.

Whether you change that or not:

Reviewed-by: Alex Elder <elder at riscstar.com>

> ---
>   arch/riscv/boot/dts/spacemit/k1.dtsi | 75 ++++++++++++++++++++++++++++
>   1 file changed, 75 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index c670ebf8fa12..584f0dbc60f5 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -3,6 +3,8 @@
>    * Copyright (C) 2024 Yangyu Chen <cyy at cyyself.name>
>    */
>   
> +#include <dt-bindings/clock/spacemit,k1-syscon.h>
> +
>   /dts-v1/;
>   / {
>   	#address-cells = <2>;
> @@ -306,6 +308,36 @@ cluster1_l2_cache: l2-cache1 {
>   		};
>   	};
>   
> +	clocks {
> +		vctcxo_1m: clock-1m {
> +			compatible = "fixed-clock";
> +			clock-frequency = <1000000>;
> +			clock-output-names = "vctcxo_1m";
> +			#clock-cells = <0>;
> +		};
> +
> +		vctcxo_24m: clock-24m {
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;
> +			clock-output-names = "vctcxo_24m";
> +			#clock-cells = <0>;
> +		};
> +
> +		vctcxo_3m: clock-3m {
> +			compatible = "fixed-clock";
> +			clock-frequency = <3000000>;
> +			clock-output-names = "vctcxo_3m";
> +			#clock-cells = <0>;
> +		};
> +
> +		osc_32k: clock-32k {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			clock-output-names = "osc_32k";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
>   	soc {
>   		compatible = "simple-bus";
>   		interrupt-parent = <&plic>;
> @@ -314,6 +346,17 @@ soc {
>   		dma-noncoherent;
>   		ranges;
>   
> +		syscon_apbc: system-control at d4015000 {
> +			compatible = "spacemit,k1-syscon-apbc";
> +			reg = <0x0 0xd4015000 0x0 0x1000>;
> +			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
> +				 <&vctcxo_24m>;
> +			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
> +				      "vctcxo_24m";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
>   		uart0: serial at d4017000 {
>   			compatible = "spacemit,k1-uart", "intel,xscale-uart";
>   			reg = <0x0 0xd4017000 0x0 0x100>;
> @@ -409,6 +452,38 @@ pinctrl: pinctrl at d401e000 {
>   			reg = <0x0 0xd401e000 0x0 0x400>;
>   		};
>   
> +		syscon_mpmu: system-controller at d4050000 {
> +			compatible = "spacemit,k1-syscon-mpmu";
> +			reg = <0x0 0xd4050000 0x0 0x209c>;
> +			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
> +				 <&vctcxo_24m>;
> +			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
> +				      "vctcxo_24m";
> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		pll: system-control at d4090000 {
> +			compatible = "spacemit,k1-pll";
> +			reg = <0x0 0xd4090000 0x0 0x1000>;
> +			clocks = <&vctcxo_24m>;
> +			spacemit,mpmu = <&syscon_mpmu>;
> +			#clock-cells = <1>;
> +		};
> +
> +		syscon_apmu: system-control at d4282800 {
> +			compatible = "spacemit,k1-syscon-apmu";
> +			reg = <0x0 0xd4282800 0x0 0x400>;
> +			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
> +				 <&vctcxo_24m>;
> +			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
> +				      "vctcxo_24m";
> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
>   		plic: interrupt-controller at e0000000 {
>   			compatible = "spacemit,k1-plic", "sifive,plic-1.0.0";
>   			reg = <0x0 0xe0000000 0x0 0x4000000>;