[PATCH v3 5/8] riscv: dts: thead: Adjust TH1520 GPIO labels

[Drew Fustini]

From: Emil Renner Berthing <emil.renner.berthing at canonical.com>

Adjust labels for the TH1520 GPIO controllers such that GPIOs can be
referenced by the names used by the documentation. Eg.

GPIO0_X  -> <&gpio0 X Y>
GPIO1_X  -> <&gpio1 X Y>
GPIO2_X  -> <&gpio2 X Y>
GPIO3_X  -> <&gpio3 X Y>
GPIO4_X  -> <&gpio4 X Y>
AOGPIO_X -> <&aogpio X Y>

Remove labels for the parent GPIO devices that shouldn't need to be
referenced.

Tested-by: Thomas Bonnefille <thomas.bonnefille at bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
Signed-off-by: Drew Fustini <dfustini at tenstorrent.com>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  2 ++
 arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts  |  2 ++
 arch/riscv/boot/dts/thead/th1520.dtsi              | 24 +++++++++++-----------
 3 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index e88b4fce755e..69f82e7afd0b 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -17,6 +17,8 @@ aliases {
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &aogpio;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 7738d2895c5a..58ad381fc1c3 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -14,6 +14,8 @@ aliases {
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &aogpio;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 7dcc250ee1d1..b958f249930e 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -322,14 +322,14 @@ uart3: serial at ffe7f04000 {
 			status = "disabled";
 		};
 
-		gpio2: gpio at ffe7f34000 {
+		gpio at ffe7f34000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xe7f34000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clk CLK_GPIO2>;
 
-			portc: gpio-controller at 0 {
+			gpio2: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -342,14 +342,14 @@ portc: gpio-controller at 0 {
 			};
 		};
 
-		gpio3: gpio at ffe7f38000 {
+		gpio at ffe7f38000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xe7f38000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clk CLK_GPIO3>;
 
-			portd: gpio-controller at 0 {
+			gpio3: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -369,14 +369,14 @@ padctrl1_apsys: pinctrl at ffe7f3c000 {
 			thead,pad-group = <2>;
 		};
 
-		gpio0: gpio at ffec005000 {
+		gpio at ffec005000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xec005000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clk CLK_GPIO0>;
 
-			porta: gpio-controller at 0 {
+			gpio0: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -389,14 +389,14 @@ porta: gpio-controller at 0 {
 			};
 		};
 
-		gpio1: gpio at ffec006000 {
+		gpio at ffec006000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xec006000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clk CLK_GPIO1>;
 
-			portb: gpio-controller at 0 {
+			gpio1: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -544,13 +544,13 @@ timer7: timer at ffffc3303c {
 			status = "disabled";
 		};
 
-		ao_gpio0: gpio at fffff41000 {
+		gpio at fffff41000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xfff41000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			porte: gpio-controller at 0 {
+			aogpio: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -570,13 +570,13 @@ padctrl_aosys: pinctrl at fffff4a000 {
 			clocks = <&aonsys_clk>;
 		};
 
-		ao_gpio1: gpio at fffff52000 {
+		gpio at fffff52000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xfff52000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			portf: gpio-controller at 0 {
+			gpio4: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;

-- 
2.34.1