[PATCH v10 00/14] riscv: Add support for xtheadvector

[Conor Dooley]

On Sun, Sep 29, 2024 at 12:44:07PM +0000, Aoba K wrote:
> Hello Charlie,
> 
> I've been working on bringing up the Sipeed Lichee RV Dock
> (which also uses the D1 SoC) with the kernel patches you provided.
> The patches applied cleanly to Palmer's for-next branch,
> but I've encountered a couple of issues:
> 
> 1. Skiffos Compilation Error during the compilation process of `cgo`:
> `unknown relocation type 17; compiled without -fpic?`
> Unfortunately, I closed the terminal before saving the full log,
> so I don't have the complete details, but the result should be reproducible.
> While this should be a SkiffOS issue, mention it in case SkiffOS is the method
> that you mentioned for bringing up the device.
> 
> 2. Image Building with sehraf/riscv-arch-image-builder:
> After building the image, the device failed to start at an early stage.
> I suspect this may be related to incorrect RAM size detection,
> as the board only has 512MB of RAM.
> Interestingly, the vendor image reports 1GB, and the Sipeed website also states
> that the Dock has 1GB, despite there being no extra memory bank present.
> 
> You can find the boot log here: https://fars.ee/bdYk.log
> 
> Any help would be appreciated, and big thanks to your work
> to make the efficient part of this board to work (again)!

The log you posted at https://fars.ee/XFzR appears to be using the
devicetree of a Nezha not the Lichee RV Dock. Why are you doing that,
when the Lichee RV Dock is supported in the kernel already?

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240930/fbb73337/attachment.sig>