[PATCH v2 3/3] riscv: dts: thead: Add TH1520 ethernet nodes

[Emil Renner Berthing]

Drew Fustini wrote:
> From: Emil Renner Berthing <emil.renner.berthing at canonical.com>
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> [drew: change apb registers from syscon to second reg of gmac node]
> [drew: add phy reset delay properties for beaglev ahead]
> Signed-off-by: Drew Fustini <dfustini at tenstorrent.com>
> ---
>  arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  91 ++++++++++++++
>  .../boot/dts/thead/th1520-lichee-module-4a.dtsi    | 135 +++++++++++++++++++++
>  arch/riscv/boot/dts/thead/th1520.dtsi              |  50 ++++++++
>  3 files changed, 276 insertions(+)

...

> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> index ca84bc2039ef..d9d2e1f4dc68 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> @@ -11,6 +11,11 @@ / {
>  	model = "Sipeed Lichee Module 4A";
>  	compatible = "sipeed,lichee-module-4a", "thead,th1520";
>
> +	aliases {
> +		ethernet0 = &gmac0;
> +		ethernet1 = &gmac1;
> +	};
> +
>  	memory at 0 {
>  		device_type = "memory";
>  		reg = <0x0 0x00000000 0x2 0x00000000>;
> @@ -25,6 +30,16 @@ &osc_32k {
>  	clock-frequency = <32768>;
>  };
>
> +&dmac0 {
> +	status = "okay";
> +};
> +
> +&aogpio {
> +	gpio-line-names = "", "", "",
> +			  "GPIO00",
> +			  "GPIO04";
> +};
> +

These GPIO line names does not belong in this patch. They should
already be included in your other patchset adding the names for the
other lines.

/Emil