[PATCH v2 2/4] dt-bindings: can: Add CAST CAN Bus Controller

[Rob Herring]

On Sun, Sep 22, 2024 at 10:51:48PM +0800, Hal Feng wrote:
> From: William Qiu <william.qiu at starfivetech.com>
> 
> Add bindings for CAST CAN Bus Controller.
> 
> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
>  .../bindings/net/can/cast,can-ctrl.yaml       | 106 ++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml
> new file mode 100644
> index 000000000000..2870cff80164
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/cast,can-ctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CAST CAN Bus Controller
> +
> +description:
> +  This CAN Bus Controller, also called CAN-CTRL, implements a highly
> +  featured and reliable CAN bus controller that performs serial
> +  communication according to the CAN protocol.
> +
> +  The CAN-CTRL comes in three variants, they are CC, FD, and XL.
> +  The CC variant supports only Classical CAN, the FD variant adds support
> +  for CAN FD, and the XL variant supports the Classical CAN, CAN FD, and
> +  CAN XL standards.
> +
> +maintainers:
> +  - William Qiu <william.qiu at starfivetech.com>
> +  - Hal Feng <hal.feng at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        - starfive,jh7110-can
> +      - const: cast,can-ctrl-fd-7x10N00S00

What's the 7x10...? Perhaps some explanation on it.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: timer
> +      - const: core
> +
> +  resets:
> +    minItems: 3
> +
> +  reset-names:
> +    items:
> +      - const: apb
> +      - const: timer
> +      - const: core
> +
> +  starfive,syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to System Register Controller syscon node
> +          - description: offset of SYS_SYSCONSAIF__SYSCFG register for CAN controller
> +          - description: shift of SYS_SYSCONSAIF__SYSCFG register for CAN controller
> +          - description: mask of SYS_SYSCONSAIF__SYSCFG register for CAN controller
> +    description:
> +      Should be four parameters, the phandle to System Register Controller
> +      syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register
> +      for CAN controller.

This just repeats what the schema says. More useful would be what you 
need to access/control in this register.

Rob