[PATCH] usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support

[Radhey Shyam Pandey]

Introduce new kernel config symbol for Microchip usb5744 SMBus programming
support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these
APIs should only be invoked when kernel has I2C support. This new kernel
config describes the dependency on I2C kernel support and fix the below
build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m.

riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o:
undefined reference to `i2c_find_device_by_fwnode'
drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined
reference to `i2c_smbus_write_block_data'
<snip>

Parsing of the i2c-bus bus handle is not put under usb5744 kernel config
check as the intention is to report an error when DT is configured for
usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled.

Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
Suggested-by: Matthias Kaehlcke <matthias at kaehlcke.net>
Reported-by: kernel test robot <lkp at intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/
---
 drivers/usb/misc/Kconfig           | 11 +++++++++++
 drivers/usb/misc/onboard_usb_dev.c |  6 ++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 50b86d531701..29976a93f122 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -331,3 +331,14 @@ config USB_ONBOARD_DEV
 	  this config will enable the driver and it will automatically
 	  match the state of the USB subsystem. If this driver is a
 	  module it will be called onboard_usb_dev.
+
+config USB_ONBOARD_DEV_USB5744
+	bool "Onboard USB Microchip usb5744 hub with SMBus support"
+	depends on (USB_ONBOARD_DEV && I2C=y) || (USB_ONBOARD_DEV=m && I2C=m)
+	default y
+	help
+	  Say Y here if you want to support onboard USB Microchip usb5744
+	  hub that requires SMBus initialization.
+
+	  This options enables usb5744 i2c default initialization sequence
+	  during hub start-up configuration stage.
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index 560591e02d6a..75dfdca04ff1 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -311,7 +311,7 @@ static void onboard_dev_attach_usb_driver(struct work_struct *work)
 
 static int onboard_dev_5744_i2c_init(struct i2c_client *client)
 {
-#if IS_ENABLED(CONFIG_I2C)
+#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
 	struct device *dev = &client->dev;
 	int ret;
 
@@ -394,9 +394,11 @@ static int onboard_dev_probe(struct platform_device *pdev)
 
 	i2c_node = of_parse_phandle(pdev->dev.of_node, "i2c-bus", 0);
 	if (i2c_node) {
-		struct i2c_client *client;
+		struct i2c_client *client = NULL;
 
+#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
 		client = of_find_i2c_device_by_node(i2c_node);
+#endif
 		of_node_put(i2c_node);
 
 		if (!client) {

base-commit: ef545bc03a65438cabe87beb1b9a15b0ffcb6ace
-- 
2.34.1