[PATCH RFC v1 2/3] dt-bindings: mailbox: Add thead,th1520-mailbox bindings
Rob Herring
robh at kernel.org
Wed Sep 18 13:36:27 PDT 2024
On Wed, Sep 18, 2024 at 03:49:00PM +0200, Michal Wilczynski wrote:
> Add bindings for the mailbox controller. This work is based on the vendor
> kernel. [1]
>
> Link: https://github.com/revyos/thead-kernel.git [1]
>
> Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>
> ---
> .../bindings/mailbox/thead,th1520-mbox.yaml | 83 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 84 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
>
> diff --git a/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> new file mode 100644
> index 000000000000..f446fae76398
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/thead,th1520-mbox.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: T-head TH1520 Mailbox Controller
> +
> +description: |
Don't need '|' if no formatting.
> + The T-head mailbox controller enables two cores within the SoC to
> + communicate and coordinate by passing messages (e.g., data, status,
> + and control) through the mailbox channels. It also provides the ability
> + for one core to signal the other processor using interrupts.
> +
> +maintainers:
> + - Michal Wilczynski <m.wilczynski at samsung.com>
> +
> +properties:
> + compatible:
> + const: thead,th1520-mbox
> +
> + reg:
> + description: Contains base addresses and sizes for the mailbox and remote ICUs.
Drop. Redundant.
> + items:
> + - description: Mailbox local base address
> + - description: Remote ICU 0 base address
> + - description: Remote ICU 1 base address
> + - description: Remote ICU 2 base address
> +
> + reg-names:
> + items:
> + - const: local_base
Just 'local'
> + - const: remote_icu0
> + - const: remote_icu1
> + - const: remote_icu2
> +
> + interrupts:
> + maxItems: 1
> + description: Interrupt for the mailbox controller.
Drop description. That's obvious.
> +
> + clocks:
> + maxItems: 1
> + description: Clock phandle for the mailbox controller.
Drop
> +
> + clock-names:
> + items:
> + - const: ipg
> +
> + icu_cpu_id:
Needs a vendor prefix and s/_/-/.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: CPU ID for the ICU.
Constraints?
Nowhere in this patch is ICU defined.
> +
> + '#mbox-cells':
> + const: 2
> + description: Number of cells required to encode the mailbox specifier.
You need to say what each cell contains.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - icu_cpu_id
> + - '#mbox-cells'
> +
> +dependencies:
> + clock-names: [ clocks ]
Core schema already does this.
> +
> +examples:
> + - |
> + mbox_910t: mbox at ffffc38000 {
Drop unused labels.
Standard name is 'mailbox', not 'mbox'.
> + compatible = "thead,th1520-mbox";
> + reg = <0xff 0xffc38000 0x0 0x4000>,
> + <0xff 0xffc44000 0x0 0x1000>,
> + <0xff 0xffc4c000 0x0 0x1000>,
> + <0xff 0xffc54000 0x0 0x1000>;
> + reg-names = "local_base", "remote_icu0", "remote_icu1", "remote_icu2";
> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
> + icu_cpu_id = <0>;
> + #mbox-cells = <2>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7331b30deef8..49198b2ed2e7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19719,6 +19719,7 @@ L: linux-riscv at lists.infradead.org
> S: Maintained
> T: git https://github.com/pdp7/linux.git
> F: Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
> +F: Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> F: arch/riscv/boot/dts/thead/
> F: drivers/clk/thead/clk-th1520-ap.c
> F: drivers/mailbox/mailbox-th1520.c
> --
> 2.34.1
>
More information about the linux-riscv
mailing list