[RESEND PATCH 1/3] dt-bindings: pinctrl: Add support for canaan,k230 SoC

[Rob Herring]

On Mon, Sep 16, 2024 at 02:42:23PM +0800, Ze Huang wrote:
> Add device tree binding details for Canaan K230 pinctrl device.
> 
> Signed-off-by: Ze Huang <18771902331 at 163.com>
> ---
>  .../bindings/pinctrl/canaan,k230-pinctrl.yaml | 128 ++++++++++++++++++
>  1 file changed, 128 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
> new file mode 100644
> index 000000000000..979c5bd71e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/canaan,k230-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Canaan Kendryte K230 Pin Controller
> +
> +maintainers:
> +  - Ze Huang <18771902331 at 163.com>
> +
> +description:
> +  The Canaan Kendryte K230 platform includes 64 IO pins, each capable of
> +  multiplexing up to 5 different functions. Pin function configuration is
> +  performed on a per-pin basis.
> +
> +properties:
> +  compatible:
> +    const: canaan,k230-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    additionalProperties: false
> +    description:
> +      A pinctrl node should contain at least one subnode representing the
> +      pinctrl groups available on the machine.
> +
> +    patternProperties:
> +      '-cfg$':
> +        type: object
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
> +        additionalProperties: false
> +        description:
> +          Each subnode will list the pins it needs, and how they should
> +          be configured, with regard to muxer configuration, bias, input
> +          enable/disable, input schmitt trigger, slew-rate enable/disable,
> +          slew-rate, drive strength.
> +
> +        properties:
> +          pinmux:
> +            $ref: /schemas/types.yaml#/definitions/uint32-array

Drop. You need to add a $ref to pinmux-node.yaml (alongside 
pincfg-node.yaml).

> +            description:
> +              The list of GPIOs and their mux settings that properties in
> +              the node apply to. This should be set with the macro
> +              'K230_PINMUX(pin, mode)'
> +
> +          bias-disable: true
> +
> +          bias-pull-up: true
> +
> +          bias-pull-down: true
> +
> +          drive-strength:
> +            minimum: 0
> +            maximum: 15
> +
> +          input-enable: true
> +
> +          output-enable: true
> +
> +          input-schmitt-enable: true
> +
> +          slew-rate:
> +            $ref: /schemas/types.yaml#/definitions/uint32

Drop. Already has a defined type.

> +            description: |
> +              slew rate control enable
> +              0: disable
> +              1: enable
> +
> +            enum: [0, 1]
> +
> +          power-source:
> +            $ref: /schemas/types.yaml#/definitions/uint32

Drop. Already has a defined type.

> +            description: |
> +              Specifies the power source voltage for the IO bank that the
> +              pin belongs to. Each bank of IO pins operate at a specific,
> +              fixed voltage levels. Incorrect voltage configuration can
> +              damage the chip. The defined constants represent the
> +              possible voltage configurations:
> +
> +              - K230_MSC_3V3 (value 0): 3.3V power supply
> +              - K230_MSC_1V8 (value 1): 1.8V power supply
> +
> +              The following banks have the corresponding voltage
> +              configurations:
> +
> +              - bank IO0 to IO1: Fixed at 1.8V
> +              - bank IO2 to IO13: Fixed at 1.8V
> +              - bank IO14 to IO25: Fixed at 1.8V
> +              - bank IO26 to IO37: Fixed at 1.8V
> +              - bank IO38 to IO49: Fixed at 1.8V
> +              - bank IO50 to IO61: Fixed at 3.3V
> +              - bank IO62 to IO63: Fixed at 1.8V
> +
> +            enum: [0, 1]
> +
> +        required:
> +          - pinmux
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pinctrl: pinctrl at 91105000 {

Drop unused labels.

> +        compatible = "canaan,k230-pinctrl";
> +        reg = <0x91105000 0x100>;
> +
> +        uart2_pins: uart2-pins {
> +            uart2-pins-cfg {
> +                pinmux = <0x503>, /* uart2 txd */
> +                         <0x603>; /* uart2 rxd */
> +                slew-rate = <0>;
> +                drive-strength = <4>;
> +                power-source = <1>;
> +                input-enable;
> +                output-enable;
> +                bias-disable;
> +            };
> +        };
> +    };
> -- 
> 2.46.1
>