[PATCH v4 00/30] riscv control-flow integrity for usermode
Deepak Gupta
debug at rivosinc.com
Thu Sep 12 16:16:19 PDT 2024
v4 for cpu assisted riscv user mode control flow integrity.
zicfiss and zicfilp [1] are ratified riscv CPU extensions.
v3 [2] was sent in April this year for riscv usermode control
flow integrity enabling.
To get more information on zicfilp and zicfiss riscv CPU extensions,
patch series adds documentation for `zicfilp` and `zicfiss`
Documentation/arch/riscv/zicfiss.rst
Documentation/arch/riscv/zicfilp.rst
Additionally, spec can be obtained from [1].
How to test this series
=======================
Toolchain
---------
$ git clone git at github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev
$ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static"
$ make -j$(nproc)
Qemu
----
$ git clone git at github.com:deepak0414/qemu.git -b zicfilp_zicfiss_ratified_master_july11
$ cd qemu
$ mkdir build
$ cd build
$ ../configure --target-list=riscv64-softmmu
$ make -j$(nproc)
Opensbi
-------
$ git clone git at github.com:deepak0414/opensbi.git -b cfi_spec_split_opensbi
$ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic
Linux
-----
Running defconfig is fine. CFI is enabled by default if the toolchain
supports it.
$ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig
$ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc)
Running
-------
Modify your qemu command to have:
-bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin
-cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true
vDSO related Opens (in the flux)
=================================
I am listing these opens for laying out plan and what to expect in future
patch sets. And of course for the sake of discussion.
Shadow stack and landing pad enabling in vDSO
----------------------------------------------
vDSO must have shadow stack and landing pad support compiled in for task
to have shadow stack and landing pad support. This patch series doesn't
enable that (yet). Enabling shadow stack support in vDSO should be
straight forward (intend to do that in next versions of patch set). Enabling
landing pad support in vDSO requires some collaboration with toolchain folks
to follow a single label scheme for all object binaries. This is necessary to
ensure that all indirect call-sites are setting correct label and target landing
pads are decorated with same label scheme.
How many vDSOs
---------------
Shadow stack instructions are carved out of zimop (may be operations) and if CPU
doesn't implement zimop, they're illegal instructions. Kernel could be running on
a CPU which may or may not implement zimop. And thus kernel will have to carry 2
different vDSOs and expose the appropriate one depending on whether CPU implements
zimop or not.
[1] - https://github.com/riscv/riscv-cfi
[2] - https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/
---
changelog
---------
v4
--
- rebased on 6.11-rc6
- envcfg: Converged with Samuel Holland's patches for envcfg management on per-
thread basis.
- vma_is_shadow_stack is renamed to is_vma_shadow_stack
- picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch
- signal context: using extended context management to maintain compatibility.
- fixed `-Wmissing-prototypes` compiler warnings for prctl functions
- Documentation fixes and amending typos.
v3
--
envcfg:
logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been
picked on per task basis, even though CPU didn't implement it. Fixed in
this series.
dt-bindings:
As suggested, split into separate commit. fixed the messaging that spec is
in public review
arch_is_shadow_stack change:
arch_is_shadow_stack changed to vma_is_shadow_stack
hwprobe:
zicfiss / zicfilp if present will get enumerated in hwprobe
selftests:
As suggested, added object and binary filenames to .gitignore
Selftest binary anyways need to be compiled with cfi enabled compiler which
will make sure that landing pad and shadow stack are enabled. Thus removed
separate enable/disable tests. Cleaned up tests a bit.
v2
--
- Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow
integrity for user mode programs can be compiled in the kernel.
- Enabling of control flow integrity for user programs is left to user runtime
- This patch series introduces arch agnostic `prctls` to enable shadow stack
and indirect branch tracking. And implements them on riscv.
Deepak Gupta (25):
mm: helper `is_shadow_stack_vma` to check shadow stack vma
riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv
riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml)
riscv: zicfiss / zicfilp enumeration
riscv: zicfiss / zicfilp extension csr and bit definitions
riscv: usercfi state for task and save/restore of CSR_SSP on trap
entry/exit
riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE
riscv mm: manufacture shadow stack pte
riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs
riscv mmu: write protect and shadow stack
riscv/mm: Implement map_shadow_stack() syscall
riscv/shstk: If needed allocate a new shadow stack on clone
prctl: arch-agnostic prctl for indirect branch tracking
riscv: Implements arch agnostic shadow stack prctls
riscv: Implements arch agnostic indirect branch tracking prctls
riscv/traps: Introduce software check exception
riscv sigcontext: cfi state struct definition for sigcontext
riscv signal: save and restore of shadow stack for signal
riscv/kernel: update __show_regs to print shadow stack register
riscv/ptrace: riscv cfi status and state via ptrace and in core files
riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe
riscv: create a config for shadow stack and landing pad instr support
riscv: Documentation for landing pad / indirect branch tracking
riscv: Documentation for shadow stack on riscv
kselftest/riscv: kselftest for user mode cfi
Mark Brown (2):
mm: Introduce ARCH_HAS_USER_SHADOW_STACK
prctl: arch-agnostic prctl for shadow stack
Samuel Holland (3):
riscv: Enable cbo.zero only when all harts support Zicboz
riscv: Add support for per-thread envcfg CSR values
riscv: Call riscv_user_isa_enable() only on the boot hart
Documentation/arch/riscv/zicfilp.rst | 104 ++++
Documentation/arch/riscv/zicfiss.rst | 169 ++++++
.../devicetree/bindings/riscv/extensions.yaml | 12 +
arch/riscv/Kconfig | 20 +
arch/riscv/include/asm/asm-prototypes.h | 1 +
arch/riscv/include/asm/cpufeature.h | 15 +-
arch/riscv/include/asm/csr.h | 16 +
arch/riscv/include/asm/entry-common.h | 2 +
arch/riscv/include/asm/hwcap.h | 2 +
arch/riscv/include/asm/mman.h | 24 +
arch/riscv/include/asm/pgtable.h | 30 +-
arch/riscv/include/asm/processor.h | 2 +
arch/riscv/include/asm/switch_to.h | 8 +
arch/riscv/include/asm/thread_info.h | 4 +
arch/riscv/include/asm/usercfi.h | 142 +++++
arch/riscv/include/uapi/asm/hwprobe.h | 2 +
arch/riscv/include/uapi/asm/ptrace.h | 18 +
arch/riscv/include/uapi/asm/sigcontext.h | 3 +
arch/riscv/kernel/Makefile | 2 +
arch/riscv/kernel/asm-offsets.c | 4 +
arch/riscv/kernel/cpufeature.c | 13 +-
arch/riscv/kernel/entry.S | 29 +
arch/riscv/kernel/process.c | 32 +-
arch/riscv/kernel/ptrace.c | 83 +++
arch/riscv/kernel/signal.c | 62 ++-
arch/riscv/kernel/smpboot.c | 2 -
arch/riscv/kernel/suspend.c | 4 +-
arch/riscv/kernel/sys_hwprobe.c | 2 +
arch/riscv/kernel/sys_riscv.c | 10 +
arch/riscv/kernel/traps.c | 38 ++
arch/riscv/kernel/usercfi.c | 506 ++++++++++++++++++
arch/riscv/mm/init.c | 2 +-
arch/riscv/mm/pgtable.c | 17 +
arch/x86/Kconfig | 1 +
fs/proc/task_mmu.c | 2 +-
include/linux/cpu.h | 4 +
include/linux/mm.h | 12 +-
include/uapi/asm-generic/mman.h | 1 +
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 48 ++
kernel/sys.c | 60 +++
mm/Kconfig | 6 +
mm/gup.c | 2 +-
mm/internal.h | 2 +-
mm/mmap.c | 1 +
tools/testing/selftests/riscv/Makefile | 2 +-
tools/testing/selftests/riscv/cfi/.gitignore | 3 +
tools/testing/selftests/riscv/cfi/Makefile | 10 +
.../testing/selftests/riscv/cfi/cfi_rv_test.h | 83 +++
.../selftests/riscv/cfi/riscv_cfi_test.c | 82 +++
.../testing/selftests/riscv/cfi/shadowstack.c | 362 +++++++++++++
.../testing/selftests/riscv/cfi/shadowstack.h | 37 ++
52 files changed, 2079 insertions(+), 20 deletions(-)
create mode 100644 Documentation/arch/riscv/zicfilp.rst
create mode 100644 Documentation/arch/riscv/zicfiss.rst
create mode 100644 arch/riscv/include/asm/mman.h
create mode 100644 arch/riscv/include/asm/usercfi.h
create mode 100644 arch/riscv/kernel/usercfi.c
create mode 100644 tools/testing/selftests/riscv/cfi/.gitignore
create mode 100644 tools/testing/selftests/riscv/cfi/Makefile
create mode 100644 tools/testing/selftests/riscv/cfi/cfi_rv_test.h
create mode 100644 tools/testing/selftests/riscv/cfi/riscv_cfi_test.c
create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.c
create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.h
--
2.45.0
More information about the linux-riscv
mailing list