[PATCH 6.6 v2 3/4] riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1

[Hal Feng]

> On 12.09.24 10:55, WangYuli wrote:
> 
> From: Xingyu Wu <xingyu.wu at starfivetech.com>
> 
> [ Upstream commit 92cfc35838b2a4006abb9e3bafc291b56f135d01 ]
> 
> Add I2Srx/I2Stx0/I2Stx1 nodes and pins configuration for the StarFive JH7110
> SoC.
> 
> Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
> Reviewed-by: Walker Chen <walker.chen at starfivetech.com>
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> Signed-off-by: WangYuli <wangyuli at uniontech.com>
> ---
>  .../jh7110-starfive-visionfive-2.dtsi         | 58 +++++++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 65 +++++++++++++++++++
>  2 files changed, 123 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 4874e3bb42ab..caa59b9b2f19 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -202,6 +202,24 @@ &i2c6 {
>  	status = "okay";
>  };
> 
> +&i2srx {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2srx_pins>;
> +	status = "okay";
> +};
> +
> +&i2stx0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mclk_ext_pins>;
> +	status = "okay";
> +};
> +
> +&i2stx1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2stx1_pins>;
> +	status = "okay";
> +};
> +
>  &mmc0 {
>  	max-frequency = <100000000>;
>  	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; @@ -
> 340,6 +358,46 @@ GPOEN_SYS_I2C6_DATA,
>  		};
>  	};
> 
> +	i2srx_pins: i2srx-0 {
> +		clk-sd-pins {
> +			pinmux = <GPIOMUX(38, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_I2SRX_BCLK)>,
> +				 <GPIOMUX(63, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_I2SRX_LRCK)>,
> +				 <GPIOMUX(38, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_I2STX1_BCLK)>,
> +				 <GPIOMUX(63, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_I2STX1_LRCK)>,
> +				 <GPIOMUX(61, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_I2SRX_SDIN0)>;
> +			input-enable;
> +		};
> +	};
> +
> +	i2stx1_pins: i2stx1-0 {
> +		sd-pins {
> +			pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
> +					      GPOEN_ENABLE,
> +					      GPI_NONE)>;
> +			bias-disable;
> +			input-disable;
> +		};
> +	};
> +
> +	mclk_ext_pins: mclk-ext-0 {
> +		mclk-ext-pins {
> +			pinmux = <GPIOMUX(4, GPOUT_LOW,
> +					     GPOEN_DISABLE,
> +					     GPI_SYS_MCLK_EXT)>;
> +			input-enable;
> +		};
> +	};
> +
>  	mmc0_pins: mmc0-0 {
>  		 rst-pins {
>  			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,

The above changes had been reverted in commit e0503d47e93d in the mainline.
Is it appropriate to merge this patch into the stable branch?

https://lore.kernel.org/all/20240415125033.86909-1-hannah.peuckmann@canonical.com/

Best regards,
Hal

> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index e85464c328d0..621b68c02ea8 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -512,6 +512,30 @@ tdm: tdm at 10090000 {
>  			status = "disabled";
>  		};
> 
> +		i2srx: i2s at 100e0000 {
> +			compatible = "starfive,jh7110-i2srx";
> +			reg = <0x0 0x100e0000 0x0 0x1000>;
> +			clocks = <&syscrg JH7110_SYSCLK_I2SRX_BCLK_MST>,
> +				 <&syscrg JH7110_SYSCLK_I2SRX_APB>,
> +				 <&syscrg JH7110_SYSCLK_MCLK>,
> +				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
> +				 <&mclk_ext>,
> +				 <&syscrg JH7110_SYSCLK_I2SRX_BCLK>,
> +				 <&syscrg JH7110_SYSCLK_I2SRX_LRCK>,
> +				 <&i2srx_bclk_ext>,
> +				 <&i2srx_lrck_ext>;
> +			clock-names = "i2sclk", "apb", "mclk",
> +				      "mclk_inner", "mclk_ext", "bclk",
> +				      "lrck", "bclk_ext", "lrck_ext";
> +			resets = <&syscrg JH7110_SYSRST_I2SRX_APB>,
> +				 <&syscrg JH7110_SYSRST_I2SRX_BCLK>;
> +			dmas = <0>, <&dma 24>;
> +			dma-names = "tx", "rx";
> +			starfive,syscon = <&sys_syscon 0x18 0x2>;
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		usb0: usb at 10100000 {
>  			compatible = "starfive,jh7110-usb";
>  			ranges = <0x0 0x0 0x10100000 0x100000>; @@ -
> 736,6 +760,47 @@ spi6: spi at 120a0000 {
>  			status = "disabled";
>  		};
> 
> +		i2stx0: i2s at 120b0000 {
> +			compatible = "starfive,jh7110-i2stx0";
> +			reg = <0x0 0x120b0000 0x0 0x1000>;
> +			clocks = <&syscrg
> JH7110_SYSCLK_I2STX0_BCLK_MST>,
> +				 <&syscrg JH7110_SYSCLK_I2STX0_APB>,
> +				 <&syscrg JH7110_SYSCLK_MCLK>,
> +				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
> +				 <&mclk_ext>;
> +			clock-names = "i2sclk", "apb", "mclk",
> +				      "mclk_inner","mclk_ext";
> +			resets = <&syscrg JH7110_SYSRST_I2STX0_APB>,
> +				 <&syscrg JH7110_SYSRST_I2STX0_BCLK>;
> +			dmas = <&dma 47>;
> +			dma-names = "tx";
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2stx1: i2s at 120c0000 {
> +			compatible = "starfive,jh7110-i2stx1";
> +			reg = <0x0 0x120c0000 0x0 0x1000>;
> +			clocks = <&syscrg
> JH7110_SYSCLK_I2STX1_BCLK_MST>,
> +				 <&syscrg JH7110_SYSCLK_I2STX1_APB>,
> +				 <&syscrg JH7110_SYSCLK_MCLK>,
> +				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
> +				 <&mclk_ext>,
> +				 <&syscrg JH7110_SYSCLK_I2STX1_BCLK>,
> +				 <&syscrg JH7110_SYSCLK_I2STX1_LRCK>,
> +				 <&i2stx_bclk_ext>,
> +				 <&i2stx_lrck_ext>;
> +			clock-names = "i2sclk", "apb", "mclk",
> +				      "mclk_inner", "mclk_ext", "bclk",
> +				      "lrck", "bclk_ext", "lrck_ext";
> +			resets = <&syscrg JH7110_SYSRST_I2STX1_APB>,
> +				 <&syscrg JH7110_SYSRST_I2STX1_BCLK>;
> +			dmas = <&dma 48>;
> +			dma-names = "tx";
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		sfctemp: temperature-sensor at 120e0000 {
>  			compatible = "starfive,jh7110-temp";
>  			reg = <0x0 0x120e0000 0x0 0x10000>;
> --
> 2.43.4