[PATCH v9 2/3] PCI: microchip: Fix inbound address translation tables
Minda Chen
minda.chen at starfivetech.com
Thu Sep 12 02:49:38 PDT 2024
>
> From: Daire McNamara <daire.mcnamara at microchip.com>
>
> On Microchip PolarFire SoC the PCIe Root Port can be behind one of three
> general purpose Fabric Interface Controller (FIC) buses that encapsulates an
> AXI-S bus. Depending on which FIC(s) the Root Port is connected through to CPU
> space, and what address translation is done by that FIC, the Root Port driver's
> inbound address translation may vary.
>
> For all current supported designs and all future expected designs, inbound
> address translation done by a FIC on PolarFire SoC varies depending on whether
> PolarFire SoC is operating in coherent DMA mode or noncoherent DMA mode.
>
> The setup of the outbound address translation tables in the Root Port driver only
> needs to handle these two cases.
>
> Setup the inbound address translation tables to one of two address translations,
> depending on whether the Root Port is being used with coherent DMA or
> noncoherent DMA.
>
> Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip Polarfire PCIe controller
> driver")
> Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> ---
> .../pci/controller/plda/pcie-microchip-host.c | 93 +++++++++++++++++++
> drivers/pci/controller/plda/pcie-plda-host.c | 17 +++-
> drivers/pci/controller/plda/pcie-plda.h | 6 +-
> drivers/pci/controller/plda/pcie-starfive.c | 3 +
> 4 files changed, 114 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> b/drivers/pci/controller/plda/pcie-microchip-host.c
> index fa4c85be21f0..e06251523560 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -7,21 +7,27 @@
> * Author: Daire McNamara <daire.mcnamara at microchip.com>
> */
>
> +#include <linux/align.h>
> +#include <linux/bits.h>
> #include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/irqchip/chained_irq.h>
> #include <linux/irqdomain.h>
> +#include <linux/log2.h>
> #include <linux/module.h>
> #include <linux/msi.h>
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> #include <linux/pci-ecam.h>
> #include <linux/platform_device.h>
> +#include <linux/wordpart.h>
>
> #include "../../pci.h"
> #include "pcie-plda.h"
>
> #define MC_OUTBOUND_TRANS_TBL_MASK GENMASK(31, 0)
> +#define MC_MAX_NUM_INBOUND_WINDOWS 8
> +#define MPFS_NC_BOUNCE_ADDR 0x80000000
>
> /* PCIe Bridge Phy and Controller Phy offsets */
> #define MC_PCIE1_BRIDGE_ADDR 0x00008000u
> @@ -614,6 +620,89 @@ static void mc_disable_interrupts(struct mc_pcie
> *port)
> writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST); }
>
> +static void mc_pcie_setup_inbound_atr(int window_index, u64 axi_addr,
> + u64 pcie_addr, u64 size)
> +{
> + void __iomem *bridge_base_addr = port->axi_base_addr +
> + MC_PCIE_BRIDGE_ADDR;
> + u32 table_offset = window_index * ATR_ENTRY_SIZE;
> + void __iomem *table_addr = bridge_base_addr + table_offset;
> + u32 atr_sz;
> + u32 val;
> +
> + atr_sz = ilog2(size) - 1;
> +
> + val = ALIGN_DOWN(lower_32_bits(pcie_addr), SZ_4K);
> + val |= FIELD_PREP(ATR_SIZE_MASK, atr_sz);
> + val |= ATR_IMPL_ENABLE;
> +
> + writel(val, table_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +
> + writel(upper_32_bits(pcie_addr), table_addr +
> +ATR0_PCIE_WIN0_SRC_ADDR);
> +
> + writel(lower_32_bits(axi_addr), table_addr +
> ATR0_PCIE_WIN0_TRSL_ADDR_LSB);
> + writel(upper_32_bits(axi_addr), table_addr +
> +ATR0_PCIE_WIN0_TRSL_ADDR_UDW);
> +
> + writel(TRSL_ID_AXI4_MASTER_0, table_addr +
> ATR0_PCIE_WIN0_TRSL_PARAM);
> +}
> +
> +static int mc_pcie_setup_inbound_ranges(struct platform_device *pdev,
> + struct mc_pcie *port)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *dn = dev->of_node;
> + struct of_range_parser parser;
> + struct of_range range;
> + int atr_index = 0;
> +
> + /*
> + * MPFS PCIe Root Port is 32-bit only, behind a Fabric Interface
> + * Controller FPGA logic block which contains the AXI-S interface.
> + *
> + * From the point of view of the PCIe Root Port, there are only
> + * two supported Root Port configurations:
> + *
> + * Configuration 1: for use with fully coherent designs; supports a
> + * window from 0x0 (CPU space) to specified PCIe space.
> + *
> + * Configuration 2: for use with non-coherent designs; supports two
> + * 1 GB wide windows to CPU space; one mapping CPU space 0 to PCIe
> + * space 0x80000000 and mapping CPU space 0x40000000 to pcie
> + * space 0xc0000000. This cfg needs two windows because of how
> + * the MSI space is allocated in the AXI-S range on MPFS.
> + *
> + * The FIC interface outside the PCIe block *must* complete the inbound
> + * address translation as per MCHP MPFS FPGA design guidelines.
> + */
> + if (device_property_read_bool(dev, "dma-noncoherent")) {
> + /*
> + * Always need same two tables in this case. Need two tables
> + * due to hardware interactions between address and size.
> + */
> + mc_pcie_setup_inbound_atr(0, 0, MPFS_NC_BOUNCE_ADDR, SZ_1G);
> + mc_pcie_setup_inbound_atr(1, SZ_1G, MPFS_NC_BOUNCE_ADDR +
> SZ_1G, SZ_1G);
> + } else {
> + /* Find any DMA ranges */
> + if (of_pci_dma_range_parser_init(&parser, dn)) {
> + /* No DMA range property - setup default */
> + mc_pcie_setup_inbound_atr(0, 0, 0, SZ_4G);
> + return 0;
> + }
> +
> + for_each_of_range(&parser, &range) {
> + if (atr_index >= MC_MAX_NUM_INBOUND_WINDOWS) {
> + dev_err(dev, "too many inbound ranges; %d available
> tables\n",
> + MC_MAX_NUM_INBOUND_WINDOWS);
> + return -EINVAL;
> + }
> + mc_pcie_setup_inbound_atr(atr_index, 0, range.pci_addr,
> range.size);
> + atr_index++;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int mc_pcie_setup_iomems(struct pci_host_bridge *bridge,
> struct plda_pcie_rp *port)
> {
> @@ -656,6 +745,10 @@ static int mc_platform_init(struct pci_config_window
> *cfg)
> if (ret)
> return ret;
>
> + ret = mc_pcie_setup_inbound_ranges(pdev, port);
> + if (ret)
> + return ret;
> +
> port->plda.event_ops = &mc_event_ops;
> port->plda.event_irq_chip = &mc_event_irq_chip;
> port->plda.events_bitmap = GENMASK(NUM_EVENTS - 1, 0); diff --git
> a/drivers/pci/controller/plda/pcie-plda-host.c
> b/drivers/pci/controller/plda/pcie-plda-host.c
> index a18923d7cea6..2a3cc2544200 100644
> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -8,11 +8,14 @@
> * Author: Daire McNamara <daire.mcnamara at microchip.com>
> */
>
> +#include <linux/align.h>
> +#include <linux/bitfield.h>
> #include <linux/irqchip/chained_irq.h>
> #include <linux/irqdomain.h>
> #include <linux/msi.h>
> #include <linux/pci_regs.h>
> #include <linux/pci-ecam.h>
> +#include <linux/wordpart.h>
>
> #include "pcie-plda.h"
>
> @@ -509,8 +512,9 @@ void plda_pcie_setup_window(void __iomem
> *bridge_base_addr, u32 index,
> writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> ATR0_AXI4_SLV0_TRSL_PARAM);
>
> - val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
> - ATR_IMPL_ENABLE;
> + val = ALIGN_DOWN(lower_32_bits(axi_addr), SZ_4K);
> + val |= FIELD_PREP(ATR_SIZE_MASK, atr_sz);
> + val |= ATR_IMPL_ENABLE;
> writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> ATR0_AXI4_SLV0_SRCADDR_PARAM);
>
> @@ -525,13 +529,20 @@ void plda_pcie_setup_window(void __iomem
> *bridge_base_addr, u32 index,
> val = upper_32_bits(pci_addr);
> writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
> +
> +void plda_pcie_setup_inbound_address_translation(struct plda_pcie_rp
> +*port) {
> + void __iomem *bridge_base_addr = port->bridge_addr;
> + u32 val;
>
> val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); }
> -EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_inbound_address_translation);
>
> int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> struct plda_pcie_rp *port)
> diff --git a/drivers/pci/controller/plda/pcie-plda.h
> b/drivers/pci/controller/plda/pcie-plda.h
> index 0e7dc0d8e5ba..61ece26065ea 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -89,14 +89,15 @@
>
> /* PCIe AXI slave table init defines */
> #define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
> -#define ATR_SIZE_SHIFT 1
> -#define ATR_IMPL_ENABLE 1
> +#define ATR_SIZE_MASK GENMASK(6, 1)
> +#define ATR_IMPL_ENABLE BIT(0)
> #define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
> #define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
> #define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
> #define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
> #define PCIE_TX_RX_INTERFACE 0x00000000u
> #define PCIE_CONFIG_INTERFACE 0x00000001u
> +#define TRSL_ID_AXI4_MASTER_0 0x00000004u
>
> #define CONFIG_SPACE_ADDR_OFFSET 0x1000u
>
> @@ -204,6 +205,7 @@ int plda_init_interrupts(struct platform_device *pdev,
> void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> phys_addr_t axi_addr, phys_addr_t pci_addr,
> size_t size);
> +void plda_pcie_setup_inbound_address_translation(struct plda_pcie_rp
> +*port);
> int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> struct plda_pcie_rp *port);
> int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops, diff --git
> a/drivers/pci/controller/plda/pcie-starfive.c
> b/drivers/pci/controller/plda/pcie-starfive.c
> index c9933ecf6833..55e84bc79eca 100644
> --- a/drivers/pci/controller/plda/pcie-starfive.c
> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> @@ -355,6 +355,9 @@ static int starfive_pcie_host_init(struct plda_pcie_rp
> *plda)
> */
> plda_pcie_set_pref_win_64bit(plda);
>
> + /* Setup the inbound address translation */
> + plda_pcie_setup_inbound_address_translation(plda);
> +
> /*
> * Ensure that PERST has been asserted for at least 100 ms,
> * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> --
> 2.34.1
>
Hi Daire
Could you please CC Kevin to this patch-set e-mail list? Thanks.
More information about the linux-riscv
mailing list