[PATCH 3/3] riscv: dts: spacemit: add gpio support for K1 SoC

[Yixun Lan]

Populate the GPIO node in the device tree for K1 SoC.
Also, map all 128 pins as GPIO to the pinctrl controller.

Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index a2d5f7d4a942a..648b459597a4d 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -416,6 +416,19 @@ uart9: serial at d4017800 {
 			status = "disabled";
 		};
 
+		gpio: gpio at d4019000 {
+			compatible = "spacemit,k1-gpio";
+			reg = <0x0 0xd4019000 0x0 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <58>;
+			interrupt-names = "gpio_mux";
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 128>;
+		};
+
 		pinctrl: pinctrl at d401e000 {
 			compatible = "spacemit,k1-pinctrl";
 			reg = <0x0 0xd401e000 0x0 0x400>;

-- 
2.45.2