[PATCH v10 0/7] Linux RISC-V IOMMU Support

[Will Deacon]

On Tue, Oct 15, 2024 at 11:52:12PM -0700, Tomasz Jeznach wrote:
> This patch series introduces support for RISC-V IOMMU architected
> hardware into the Linux kernel.
> 
> The RISC-V IOMMU specification, which this series is based on, is
> ratified and available at GitHub/riscv-non-isa [1].
> 
> At a high level, the RISC-V IOMMU specification defines:
> 
> 1) Data structures:
>   - Device-context: Associates devices with address spaces and holds
>     per-device parameters for address translations.
>   - Process-contexts: Associates different virtual address spaces based
>     on device-provided process identification numbers.
>   - MSI page table configuration used to direct an MSI to a guest
>     interrupt file in an IMSIC.
> 2) In-memory queue interface:
>   - Command-queue for issuing commands to the IOMMU.
>   - Fault/event queue for reporting faults and events.
>   - Page-request queue for reporting "Page Request" messages received
>     from PCIe devices.
>   - Message-signaled and wire-signaled interrupt mechanisms.
> 3) Memory-mapped programming interface:
>   - Mandatory and optional register layout and description.
>   - Software guidelines for device initialization and capabilities discovery.
> 
> 
> This series introduces RISC-V IOMMU hardware initialization and complete
> single-stage translation with paging domain support.
> 
> The patches are organized as follows:
> 
> Patch 1: Introduces minimal required device tree bindings for the driver.
> Patch 2: Defines RISC-V IOMMU data structures, hardware programming interface
>          registers layout, and minimal initialization code for enabling global
>          pass-through for all connected masters.
> Patch 3: Implements the device driver for PCIe implementation of RISC-V IOMMU
>          architected hardware.
> Patch 4: Introduces IOMMU interfaces to the kernel subsystem.
> Patch 5: Implements device directory management with discovery sequences for
>          I/O mapped or in-memory device directory table location, hardware
>          capabilities discovery, and device to domain attach implementation.
> Patch 6: Implements command and fault queue, and introduces directory cache
>          invalidation sequences.
> Patch 7: Implements paging domain, using highest page-table mode advertised
>          by the hardware. This series enables only 4K mappings; complete support
>          for large page mappings will be introduced in follow-up patch series.
> 
> Follow-up patch series providing MSI interrupt remapping, complete ATS/PRI/SVA
> and VFIO/IOMMUFD support are available at the GitHub [2], and has been tested
> with published QEMU RISC-V IOMMU device model [3].
> 
> Changes from v9:
> - rebase on v6.12-rc3
> - #6 Memory ordering fix and updated commentary, based on Will’s suggestions.
> - #7 Remove riscv_iommu_device_domain_type() and use head-less kfree_rcu in
>      riscv_iommu_release_device(), based on Jason's suggestions.

Thanks, looks ok to me now.

Will