[PATCH 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC

[Andrew Lunn]

> +static void sophgo_dwmac_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
> +{
> +	struct sophgo_dwmac *dwmac = priv;
> +	unsigned long rate;
> +	int ret;
> +
> +	switch (speed) {
> +	case SPEED_1000:
> +		rate = 125000000;
> +		break;
> +	case SPEED_100:
> +		rate = 25000000;
> +		break;
> +	case SPEED_10:
> +		rate = 2500000;
> +		break;
> +	default:
> +		dev_err(dwmac->dev, "invalid speed %u\n", speed);
> +		break;
> +	}

There was a helper added recently for this, since it appears
repeatedly in drivers.

> +	ret = regmap_set_bits(regmap, args[0], DWMAC_SG2044_FLAG_USE_RX_DELAY);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "failed to set the phy rx delay\n");

Please could you explain what this delay is for. Is it the 2ns RGMII
delay?

	Andrew