[PATCH v4 2/3] pwm: sophgo: add driver for Sophgo SG2042 PWM
Chen Wang
unicornxw at gmail.com
Tue Oct 15 17:20:18 PDT 2024
From: Chen Wang <unicorn_wang at outlook.com>
Add a PWM driver for PWM controller in Sophgo SG2042 SoC.
Signed-off-by: Chen Wang <unicorn_wang at outlook.com>
---
drivers/pwm/Kconfig | 10 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sophgo-sg2042.c | 181 ++++++++++++++++++++++++++++++++
3 files changed, 192 insertions(+)
create mode 100644 drivers/pwm/pwm-sophgo-sg2042.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 0915c1e7df16..ec85f3895936 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -584,6 +584,16 @@ config PWM_SL28CPLD
To compile this driver as a module, choose M here: the module
will be called pwm-sl28cpld.
+config PWM_SOPHGO_SG2042
+ tristate "Sophgo SG2042 PWM support"
+ depends on ARCH_SOPHGO || COMPILE_TEST
+ help
+ PWM driver for the PWM controller on Sophgo SG2042 SoC. The PWM
+ controller supports outputing 4 channels of PWM waveforms.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm_sophgo_sg2042.
+
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9081e0c0e9e0..539e0def3f82 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_PWM_RZ_MTU3) += pwm-rz-mtu3.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o
+obj-$(CONFIG_PWM_SOPHGO_SG2042) += pwm-sophgo-sg2042.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
diff --git a/drivers/pwm/pwm-sophgo-sg2042.c b/drivers/pwm/pwm-sophgo-sg2042.c
new file mode 100644
index 000000000000..bed753877851
--- /dev/null
+++ b/drivers/pwm/pwm-sophgo-sg2042.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sophgo SG2042 PWM Controller Driver
+ *
+ * Copyright (C) 2024 Sophgo Technology Inc.
+ * Copyright (C) 2024 Chen Wang <unicorn_wang at outlook.com>
+ *
+ * Limitations:
+ * - After reset, the output of the PWM channel is always high.
+ * The value of HLPERIOD/PERIOD is 0.
+ * - When HLPERIOD or PERIOD is reconfigured, PWM will start to
+ * output waveforms with the new configuration after completing
+ * the running period.
+ * - When PERIOD and HLPERIOD is set to 0, the PWM wave output will
+ * be stopped and the output is pulled to high.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+/*
+ * Offset RegisterName
+ * 0x0000 HLPERIOD0
+ * 0x0004 PERIOD0
+ * 0x0008 HLPERIOD1
+ * 0x000C PERIOD1
+ * 0x0010 HLPERIOD2
+ * 0x0014 PERIOD2
+ * 0x0018 HLPERIOD3
+ * 0x001C PERIOD3
+ * Four groups and every group is composed of HLPERIOD & PERIOD
+ */
+#define SG2042_HLPERIOD(chan) ((chan) * 8 + 0)
+#define SG2042_PERIOD(chan) ((chan) * 8 + 4)
+
+#define SG2042_PWM_CHANNELNUM 4
+
+/**
+ * struct sg2042_pwm_ddata - private driver data
+ * @base: base address of mapped PWM registers
+ * @clk_rate_hz: rate of base clock in HZ
+ */
+struct sg2042_pwm_ddata {
+ void __iomem *base;
+ unsigned long clk_rate_hz;
+};
+
+static void pwm_sg2042_config(void __iomem *base, unsigned int chan, u32 period, u32 hlperiod)
+{
+ writel(period, base + SG2042_PERIOD(chan));
+ writel(hlperiod, base + SG2042_HLPERIOD(chan));
+}
+
+static int pwm_sg2042_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip);
+ u32 hlperiod;
+ u32 period;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ if (!state->enabled) {
+ pwm_sg2042_config(ddata->base, pwm->hwpwm, 0, 0);
+ return 0;
+ }
+
+ /*
+ * Period of High level (duty_cycle) = HLPERIOD x Period_clk
+ * Period of One Cycle (period) = PERIOD x Period_clk
+ */
+ period = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->period, NSEC_PER_SEC), U32_MAX);
+ hlperiod = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->duty_cycle, NSEC_PER_SEC), U32_MAX);
+
+ if (hlperiod > period) {
+ dev_err(pwmchip_parent(chip), "period < hlperiod, failed to apply current setting\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(pwmchip_parent(chip), "chan[%u]: period=%u, hlperiod=%u\n",
+ pwm->hwpwm, period, hlperiod);
+
+ pwm_sg2042_config(ddata->base, pwm->hwpwm, period, hlperiod);
+
+ return 0;
+}
+
+static int pwm_sg2042_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip);
+ unsigned int chan = pwm->hwpwm;
+ u32 hlperiod;
+ u32 period;
+
+ period = readl(ddata->base + SG2042_PERIOD(chan));
+ hlperiod = readl(ddata->base + SG2042_HLPERIOD(chan));
+
+ if (!period && !hlperiod)
+ state->enabled = false;
+ else
+ state->enabled = true;
+
+ state->period = DIV_ROUND_UP_ULL((u64)period * NSEC_PER_SEC, ddata->clk_rate_hz);
+ state->duty_cycle = DIV_ROUND_UP_ULL((u64)hlperiod * NSEC_PER_SEC, ddata->clk_rate_hz);
+
+ state->polarity = PWM_POLARITY_NORMAL;
+
+ return 0;
+}
+
+static const struct pwm_ops pwm_sg2042_ops = {
+ .apply = pwm_sg2042_apply,
+ .get_state = pwm_sg2042_get_state,
+};
+
+static const struct of_device_id sg2042_pwm_ids[] = {
+ { .compatible = "sophgo,sg2042-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sg2042_pwm_ids);
+
+static int pwm_sg2042_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sg2042_pwm_ddata *ddata;
+ struct pwm_chip *chip;
+ struct clk *clk;
+ int ret;
+
+ chip = devm_pwmchip_alloc(dev, SG2042_PWM_CHANNELNUM, sizeof(*ddata));
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+ ddata = pwmchip_get_drvdata(chip);
+
+ ddata->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ddata->base))
+ return PTR_ERR(ddata->base);
+
+ clk = devm_clk_get_enabled(dev, "apb");
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk), "failed to get base clk\n");
+
+ ret = devm_clk_rate_exclusive_get(dev, clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get exclusive rate\n");
+
+ ddata->clk_rate_hz = clk_get_rate(clk);
+ if (!ddata->clk_rate_hz || ddata->clk_rate_hz > NSEC_PER_SEC)
+ return dev_err_probe(dev, -EINVAL,
+ "Invalid clock rate: %lu\n", ddata->clk_rate_hz);
+
+ chip->ops = &pwm_sg2042_ops;
+ chip->atomic = true;
+
+ ret = devm_pwmchip_add(dev, chip);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to register PWM chip\n");
+
+ return 0;
+}
+
+static struct platform_driver pwm_sg2042_driver = {
+ .driver = {
+ .name = "sg2042-pwm",
+ .of_match_table = sg2042_pwm_ids,
+ },
+ .probe = pwm_sg2042_probe,
+};
+module_platform_driver(pwm_sg2042_driver);
+
+MODULE_AUTHOR("Chen Wang");
+MODULE_DESCRIPTION("Sophgo SG2042 PWM driver");
+MODULE_LICENSE("GPL");
--
2.34.1
More information about the linux-riscv
mailing list