[PATCH v4 0/2] riscv: Add perf support to collect KVM guest statistics from host side
Anup Patel
anup at brainfault.org
Mon Oct 14 23:42:55 PDT 2024
On Tue, Oct 15, 2024 at 8:28 AM <zhouquan at iscas.ac.cn> wrote:
>
> From: Quan Zhou <zhouquan at iscas.ac.cn>
>
> Add basic guest support to RISC-V perf, enabling it to distinguish
> whether PMU interrupts occur in the host or the guest, and then
> collect some basic guest information from the host side
> (guest os callchain is not supported for now).
>
> Based on the x86/arm implementation, tested with kvm-riscv.
> test env:
> - host: qemu-9.0.0
> - guest: qemu-9.0.0 --enable-kvm (only start one guest and run top)
>
> -----------------------------------------
> 1) perf kvm top
> ./perf kvm --host --guest \
> --guestkallsyms=/<path-to-kallsyms> \
> --guestmodules=/<path-to-modules> top
>
> PerfTop: 41 irqs/sec kernel:97.6% us: 0.0% guest kernel: 0.0% guest us: 0.0% exact: 0.0% [250Hz cycles:P], (all, 4 CPUs)
> -------------------------------------------------------------------------------
>
> 64.57% [kernel] [k] default_idle_call
> 3.12% [kernel] [k] _raw_spin_unlock_irqrestore
> 3.03% [guest.kernel] [g] mem_serial_out
> 2.61% [kernel] [k] handle_softirqs
> 2.32% [kernel] [k] do_trap_ecall_u
> 1.71% [kernel] [k] _raw_spin_unlock_irq
> 1.26% [guest.kernel] [g] do_raw_spin_lock
> 1.25% [kernel] [k] finish_task_switch.isra.0
> 1.16% [kernel] [k] do_idle
> 0.77% libc.so.6 [.] ioctl
> 0.76% [kernel] [k] queue_work_on
> 0.69% [kernel] [k] __local_bh_enable_ip
> 0.67% [guest.kernel] [g] __noinstr_text_start
> 0.64% [guest.kernel] [g] mem_serial_in
> 0.41% libc.so.6 [.] pthread_sigmask
> 0.39% [kernel] [k] mem_cgroup_uncharge_skmem
> 0.39% [kernel] [k] __might_resched
> 0.39% [guest.kernel] [g] _nohz_idle_balance.isra.0
> 0.37% [kernel] [k] sched_balance_update_blocked_averages
> 0.34% [kernel] [k] sched_balance_rq
>
> 2) perf kvm record
> ./perf kvm --host --guest \
> --guestkallsyms=/<path-to-kallsyms> \
> --guestmodules=/<path-to-modules> record -a sleep 60
>
> [ perf record: Woken up 3 times to write data ]
> [ perf record: Captured and wrote 1.292 MB perf.data.kvm (17990 samples) ]
>
> 3) perf kvm report
> ./perf kvm --host --guest \
> --guestkallsyms=/<path-to-kallsyms> \
> --guestmodules=/<path-to-modules> report -i perf.data.kvm
>
> # Total Lost Samples: 0
> #
> # Samples: 17K of event 'cycles:P'
> # Event count (approx.): 269968947184
> #
> # Overhead Command Shared Object Symbol
> # ........ ............... ....................... ..............................................
> #
> 61.86% swapper [kernel.kallsyms] [k] default_idle_call
> 2.93% :6463 [guest.kernel.kallsyms] [g] do_raw_spin_lock
> 2.82% :6462 [guest.kernel.kallsyms] [g] mem_serial_out
> 2.11% sshd [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
> 1.78% :6462 [guest.kernel.kallsyms] [g] do_raw_spin_lock
> 1.37% swapper [kernel.kallsyms] [k] handle_softirqs
> 1.36% swapper [kernel.kallsyms] [k] do_idle
> 1.21% sshd [kernel.kallsyms] [k] do_trap_ecall_u
> 1.21% sshd [kernel.kallsyms] [k] _raw_spin_unlock_irq
> 1.11% qemu-system-ris [kernel.kallsyms] [k] do_trap_ecall_u
> 0.93% qemu-system-ris libc.so.6 [.] ioctl
> 0.89% sshd [kernel.kallsyms] [k] __local_bh_enable_ip
> 0.77% qemu-system-ris [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
> 0.68% qemu-system-ris [kernel.kallsyms] [k] queue_work_on
> 0.65% sshd [kernel.kallsyms] [k] handle_softirqs
> 0.44% :6462 [guest.kernel.kallsyms] [g] mem_serial_in
> 0.42% sshd libc.so.6 [.] pthread_sigmask
> 0.34% :6462 [guest.kernel.kallsyms] [g] serial8250_tx_chars
> 0.30% swapper [kernel.kallsyms] [k] finish_task_switch.isra.0
> 0.29% swapper [kernel.kallsyms] [k] sched_balance_rq
> 0.29% sshd [kernel.kallsyms] [k] __might_resched
> 0.26% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit
> 0.26% swapper [kernel.kallsyms] [k] sched_balance_update_blocked_averages
> 0.26% swapper [kernel.kallsyms] [k] _nohz_idle_balance.isra.0
> 0.24% qemu-system-ris [kernel.kallsyms] [k] finish_task_switch.isra.0
> 0.23% :6462 [guest.kernel.kallsyms] [g] __noinstr_text_start
>
> ---
> Change since v3:
> - Rebased on v6.12-rc3
>
> Change since v2:
> - Rebased on v6.11-rc7
> - Keep the misc type consistent with other architectures as `unsigned long` (Andrew)
> - Add the same comment for `kvm_arch_pmi_in_guest` as in arm64. (Andrew)
>
> Change since v1:
> - Rebased on v6.11-rc3
> - Fix incorrect misc type (Andrew)
>
> ---
> v3 link:
> https://lore.kernel.org/all/cover.1726126795.git.zhouquan@iscas.ac.cn/
> v2 link:
> https://lore.kernel.org/all/cover.1723518282.git.zhouquan@iscas.ac.cn/
> v1 link:
> https://lore.kernel.org/all/cover.1721271251.git.zhouquan@iscas.ac.cn/
>
> Quan Zhou (2):
> riscv: perf: add guest vs host distinction
> riscv: KVM: add basic support for host vs guest profiling
>
> arch/riscv/include/asm/kvm_host.h | 10 ++++++++
> arch/riscv/include/asm/perf_event.h | 6 +++++
> arch/riscv/kernel/perf_callchain.c | 38 +++++++++++++++++++++++++++++
> arch/riscv/kvm/Kconfig | 1 +
> arch/riscv/kvm/main.c | 12 +++++++--
> arch/riscv/kvm/vcpu.c | 7 ++++++
> 6 files changed, 72 insertions(+), 2 deletions(-)
Please include Reviewed-by tags obtained on previous patch revisions.
Queued this series for Linux-6.13
Regards,
Anup
>
>
> base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354
> --
> 2.34.1
>
More information about the linux-riscv
mailing list