[PATCH v1 2/3] pinctrl: th1520: Update pinmux tables
Drew Fustini
dfustini at tenstorrent.com
Fri Oct 11 09:31:12 PDT 2024
On Fri, Oct 11, 2024 at 04:48:24PM +0200, Emil Renner Berthing wrote:
> When Drew took over the pinctrl driver it seems like he didn't use the
> git tree I pointed him at and thus missed some important fixes to the
> tables describing valid pinmux settings.
>
> The documentation has a nice overview table of these settings but
> unfortunately it doesn't fully match the register descriptions, which
> seem to be the correct version.
>
> Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC")
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> ---
> drivers/pinctrl/pinctrl-th1520.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-th1520.c b/drivers/pinctrl/pinctrl-th1520.c
> index 03326df69668..8bd40cb2f013 100644
> --- a/drivers/pinctrl/pinctrl-th1520.c
> +++ b/drivers/pinctrl/pinctrl-th1520.c
> @@ -221,9 +221,9 @@ static const struct pinctrl_pin_desc th1520_group2_pins[] = {
> TH1520_PAD(15, UART4_RTSN, UART, ____, ____, GPIO, ____, ____, 0),
> TH1520_PAD(16, UART3_TXD, DBG, UART, ____, GPIO, ____, ____, 0),
> TH1520_PAD(17, UART3_RXD, DBG, UART, ____, GPIO, ____, ____, 0),
> - TH1520_PAD(18, GPIO0_18, GPIO, I2C, ____, ____, ____, ____, 0),
> - TH1520_PAD(19, GPIO0_19, GPIO, I2C, ____, ____, ____, ____, 0),
> - TH1520_PAD(20, GPIO0_20, GPIO, UART, IR, ____, ____, ____, 0),
> + TH1520_PAD(18, GPIO0_18, GPIO, I2C, ____, ____, DPU0, DPU1, 0),
> + TH1520_PAD(19, GPIO0_19, GPIO, I2C, ____, ____, DPU0, DPU1, 0),
> + TH1520_PAD(20, GPIO0_20, GPIO, UART, IR, ____, DPU0, DPU1, 0),
> TH1520_PAD(21, GPIO0_21, GPIO, UART, IR, ____, DPU0, DPU1, 0),
> TH1520_PAD(22, GPIO0_22, GPIO, JTAG, I2C, ____, DPU0, DPU1, 0),
> TH1520_PAD(23, GPIO0_23, GPIO, JTAG, I2C, ____, DPU0, DPU1, 0),
> @@ -241,7 +241,7 @@ static const struct pinctrl_pin_desc th1520_group2_pins[] = {
> TH1520_PAD(35, GPIO1_3, GPIO, JTAG, ____, ____, DPU0, DPU1, 0),
> TH1520_PAD(36, GPIO1_4, GPIO, JTAG, ____, ____, DPU0, DPU1, 0),
> TH1520_PAD(37, GPIO1_5, GPIO, ____, ____, ____, DPU0, DPU1, 0),
> - TH1520_PAD(38, GPIO1_6, GPIO, ____, ____, ____, DPU0, DPU1, 0),
> + TH1520_PAD(38, GPIO1_6, GPIO, QSPI, ____, ____, DPU0, DPU1, 0),
> TH1520_PAD(39, GPIO1_7, GPIO, QSPI, ____, ____, DPU0, DPU1, 0),
> TH1520_PAD(40, GPIO1_8, GPIO, QSPI, ____, ____, DPU0, DPU1, 0),
> TH1520_PAD(41, GPIO1_9, GPIO, QSPI, ____, ____, DPU0, DPU1, 0),
> @@ -256,11 +256,11 @@ static const struct pinctrl_pin_desc th1520_group2_pins[] = {
> TH1520_PAD(50, CLK_OUT_1, BSEL, CLK, ____, GPIO, ____, ____, 0),
> TH1520_PAD(51, CLK_OUT_2, BSEL, CLK, ____, GPIO, ____, ____, 0),
> TH1520_PAD(52, CLK_OUT_3, BSEL, CLK, ____, GPIO, ____, ____, 0),
> - TH1520_PAD(53, GPIO1_21, GPIO, ____, ISP, ____, ____, ____, 0),
> - TH1520_PAD(54, GPIO1_22, GPIO, ____, ISP, ____, ____, ____, 0),
> - TH1520_PAD(55, GPIO1_23, GPIO, ____, ISP, ____, ____, ____, 0),
> - TH1520_PAD(56, GPIO1_24, GPIO, ____, ISP, ____, ____, ____, 0),
> - TH1520_PAD(57, GPIO1_25, GPIO, ____, ISP, ____, ____, ____, 0),
> + TH1520_PAD(53, GPIO1_21, JTAG, ____, ISP, GPIO, ____, ____, 0),
> + TH1520_PAD(54, GPIO1_22, JTAG, ____, ISP, GPIO, ____, ____, 0),
> + TH1520_PAD(55, GPIO1_23, JTAG, ____, ISP, GPIO, ____, ____, 0),
> + TH1520_PAD(56, GPIO1_24, JTAG, ____, ISP, GPIO, ____, ____, 0),
> + TH1520_PAD(57, GPIO1_25, JTAG, ____, ISP, GPIO, ____, ____, 0),
> TH1520_PAD(58, GPIO1_26, GPIO, ____, ISP, ____, ____, ____, 0),
> TH1520_PAD(59, GPIO1_27, GPIO, ____, ISP, ____, ____, ____, 0),
> TH1520_PAD(60, GPIO1_28, GPIO, ____, ISP, ____, ____, ____, 0),
> --
> 2.43.0
>
Reviewed-by: Drew Fustini <dfustini at tenstorrent.com>
More information about the linux-riscv
mailing list