[PATCH v9 0/3] Add support for Allwinner PWM on D1/T113s/R329 SoCs

[Chris Morgan]

On Mon, May 20, 2024 at 09:42:18PM +0300, Aleksandr Shubin wrote:
> 
> v2:
>  - fix dt-bindings
>  - fix a remark in the driver
> 
> v3:
>  - fix dt-bindings
>  - fix sunxi-d1s-t113.dtsi
> 
> v4:
>  - fix a remark in the driver
> 
> v5:
>  - dropped unused varibale in the driver
>  - fix dt-bindings
> 
> v6:
>  - add apb0 clock
> 
> v7:
>  - fix a remark in the driver
>  - add maintainer
> 
> v8:
>  - fix compile driver for 6.8-rc
> 
> v9:
>  - fix a remark in the driver
>  - fix dt-bindings
>  - rename apb0 -> apb
> 
> Aleksandr Shubin (3):
>   dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM
>     controller
>   pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
>   riscv: dts: allwinner: d1: Add pwm node
> 
>  .../bindings/pwm/allwinner,sun20i-pwm.yaml    |  84 ++++
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    |  12 +
>  drivers/pwm/Kconfig                           |  10 +
>  drivers/pwm/Makefile                          |   1 +
>  drivers/pwm/pwm-sun20i.c                      | 387 ++++++++++++++++++
>  5 files changed, 494 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>  create mode 100644 drivers/pwm/pwm-sun20i.c
> 
> -- 
> 2.25.1
> 

Has there been any futher updates on this? It looks like v9 was last
updated in May. I only ask because I think future patches adding
support for the H700 require this as a pre-requisite.

Thank you,
Chris