[PATCH v3 0/2] riscv: Add perf support to collect KVM guest statistics from host side

Anup Patel anup at brainfault.org
Sat Oct 5 04:06:00 PDT 2024


On Thu, Sep 12, 2024 at 1:30 PM <zhouquan at iscas.ac.cn> wrote:
>
> From: Quan Zhou <zhouquan at iscas.ac.cn>
>
> Add basic guest support to RISC-V perf, enabling it to distinguish
> whether PMU interrupts occur in the host or the guest, and then
> collect some basic guest information from the host side
> (guest os callchain is not supported for now).
>
> Based on the x86/arm implementation, tested with kvm-riscv.
> test env:
> - host: qemu-9.0.0
> - guest: qemu-9.0.0 --enable-kvm (only start one guest and run top)
>
> -----------------------------------------
> 1) perf kvm top
> ./perf kvm --host --guest \
>   --guestkallsyms=/root/repo/shared/kallsyms \
>   --guestmodules=/root/repo/shared/modules top
>
> PerfTop:      41 irqs/sec  kernel:97.6% us: 0.0% guest kernel: 0.0% guest us: 0.0% exact:  0.0% [250Hz cycles:P],  (all, 4 CPUs)
> -------------------------------------------------------------------------------
>
>     64.57%  [kernel]        [k] default_idle_call
>      3.12%  [kernel]        [k] _raw_spin_unlock_irqrestore
>      3.03%  [guest.kernel]  [g] mem_serial_out
>      2.61%  [kernel]        [k] handle_softirqs
>      2.32%  [kernel]        [k] do_trap_ecall_u
>      1.71%  [kernel]        [k] _raw_spin_unlock_irq
>      1.26%  [guest.kernel]  [g] do_raw_spin_lock
>      1.25%  [kernel]        [k] finish_task_switch.isra.0
>      1.16%  [kernel]        [k] do_idle
>      0.77%  libc.so.6       [.] ioctl
>      0.76%  [kernel]        [k] queue_work_on
>      0.69%  [kernel]        [k] __local_bh_enable_ip
>      0.67%  [guest.kernel]  [g] __noinstr_text_start
>      0.64%  [guest.kernel]  [g] mem_serial_in
>      0.41%  libc.so.6       [.] pthread_sigmask
>      0.39%  [kernel]        [k] mem_cgroup_uncharge_skmem
>      0.39%  [kernel]        [k] __might_resched
>      0.39%  [guest.kernel]  [g] _nohz_idle_balance.isra.0
>      0.37%  [kernel]        [k] sched_balance_update_blocked_averages
>      0.34%  [kernel]        [k] sched_balance_rq
>
> 2) perf kvm record
> ./perf kvm --host --guest \
>   --guestkallsyms=/root/repo/shared/kallsyms \
>   --guestmodules=/root/repo/shared/modules record -a sleep 60
>
> [ perf record: Woken up 3 times to write data ]
> [ perf record: Captured and wrote 1.292 MB perf.data.kvm (17990 samples) ]
>
> 3) perf kvm report (the data shown here is not complete)
> ./perf kvm --host --guest \
>   --guestkallsyms=/root/repo/shared/kallsyms \
>   --guestmodules=/root/repo/shared/modules report -i perf.data.kvm
>
> # Total Lost Samples: 0
> #
> # Samples: 17K of event 'cycles:P'
> # Event count (approx.): 269968947184
> #
> # Overhead  Command          Shared Object            Symbol
> # ........  ...............  .......................  ..............................................
> #
>     61.86%  swapper          [kernel.kallsyms]        [k] default_idle_call
>      2.93%  :6463            [guest.kernel.kallsyms]  [g] do_raw_spin_lock
>      2.82%  :6462            [guest.kernel.kallsyms]  [g] mem_serial_out
>      2.11%  sshd             [kernel.kallsyms]        [k] _raw_spin_unlock_irqrestore
>      1.78%  :6462            [guest.kernel.kallsyms]  [g] do_raw_spin_lock
>      1.37%  swapper          [kernel.kallsyms]        [k] handle_softirqs
>      1.36%  swapper          [kernel.kallsyms]        [k] do_idle
>      1.21%  sshd             [kernel.kallsyms]        [k] do_trap_ecall_u
>      1.21%  sshd             [kernel.kallsyms]        [k] _raw_spin_unlock_irq
>      1.11%  qemu-system-ris  [kernel.kallsyms]        [k] do_trap_ecall_u
>      0.93%  qemu-system-ris  libc.so.6                [.] ioctl
>      0.89%  sshd             [kernel.kallsyms]        [k] __local_bh_enable_ip
>      0.77%  qemu-system-ris  [kernel.kallsyms]        [k] _raw_spin_unlock_irqrestore
>      0.68%  qemu-system-ris  [kernel.kallsyms]        [k] queue_work_on
>      0.65%  sshd             [kernel.kallsyms]        [k] handle_softirqs
>      0.44%  :6462            [guest.kernel.kallsyms]  [g] mem_serial_in
>      0.42%  sshd             libc.so.6                [.] pthread_sigmask
>      0.34%  :6462            [guest.kernel.kallsyms]  [g] serial8250_tx_chars
>      0.30%  swapper          [kernel.kallsyms]        [k] finish_task_switch.isra.0
>      0.29%  swapper          [kernel.kallsyms]        [k] sched_balance_rq
>      0.29%  sshd             [kernel.kallsyms]        [k] __might_resched
>      0.26%  swapper          [kernel.kallsyms]        [k] tick_nohz_idle_exit
>      0.26%  swapper          [kernel.kallsyms]        [k] sched_balance_update_blocked_averages
>      0.26%  swapper          [kernel.kallsyms]        [k] _nohz_idle_balance.isra.0
>      0.24%  qemu-system-ris  [kernel.kallsyms]        [k] finish_task_switch.isra.0
>      0.23%  :6462            [guest.kernel.kallsyms]  [g] __noinstr_text_start
>
> ---
> Change since v2:
> - Rebased on v6.11-rc7
> - Keep the misc type consistent with other architectures
>   as `unsigned long` (Andrew)
> - Add the same comment for `kvm_arch_pmi_in_guest`
>   as in arm64. (Andrew)
>
> Change since v1:
> - Rebased on v6.11-rc3
> - Fix incorrect misc type (Andrew)
>
> ---
> v1 link:
> https://lore.kernel.org/all/cover.1721271251.git.zhouquan@iscas.ac.cn/
> v2 link:
> https://lore.kernel.org/all/cover.1723518282.git.zhouquan@iscas.ac.cn/
>
> Quan Zhou (2):
>   riscv: perf: add guest vs host distinction
>   riscv: KVM: add basic support for host vs guest profiling

Please rebase this series upon Linux-6.12-rcX and send another version.

Regards,
Anup

>
>  arch/riscv/include/asm/kvm_host.h   | 10 ++++++++
>  arch/riscv/include/asm/perf_event.h |  7 ++++++
>  arch/riscv/kernel/perf_callchain.c  | 38 +++++++++++++++++++++++++++++
>  arch/riscv/kvm/Kconfig              |  1 +
>  arch/riscv/kvm/main.c               | 12 +++++++--
>  arch/riscv/kvm/vcpu.c               |  7 ++++++
>  6 files changed, 73 insertions(+), 2 deletions(-)
>
>
> base-commit: da3ea35007d0af457a0afc87e84fddaebc4e0b63
> --
> 2.34.1
>



More information about the linux-riscv mailing list