[PATCH v13 06/40] arm64: Document boot requirements for Guarded Control Stacks

Mark Brown broonie at kernel.org
Tue Oct 1 15:58:45 PDT 2024


FEAT_GCS introduces a number of new system registers, we require that
access to these registers is not trapped when we identify that the feature
is present.  There is also a HCRX_EL2 control to make GCS operations
functional.

Since if GCS is enabled any function call instruction will cause a fault
we also require that the feature be specifically disabled, existing
kernels implicitly have this requirement and especially given that the
MMU must be disabled it is difficult to see a situation where leaving
GCS enabled would be reasonable.

Reviewed-by: Thiago Jung Bauermann <thiago.bauermann at linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
 Documentation/arch/arm64/booting.rst | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst
index b57776a68f15..aed6e9f47cf3 100644
--- a/Documentation/arch/arm64/booting.rst
+++ b/Documentation/arch/arm64/booting.rst
@@ -411,6 +411,38 @@ Before jumping into the kernel, the following conditions must be met:
 
     - HFGRWR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1.
 
+ - For CPUs with Guarded Control Stacks (FEAT_GCS):
+
+  - GCSCR_EL1 must be initialised to 0.
+
+  - GCSCRE0_EL1 must be initialised to 0.
+
+  - If EL3 is present:
+
+    - SCR_EL3.GCSEn (bit 39) must be initialised to 0b1.
+
+  - If EL2 is present:
+
+    - GCSCR_EL2 must be initialised to 0.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - HCRX_EL2.GCSEn must be initialised to 0b1.
+
+    - HFGITR_EL2.nGCSEPP (bit 59) must be initialised to 0b1.
+
+    - HFGITR_EL2.nGCSSTR_EL1 (bit 58) must be initialised to 0b1.
+
+    - HFGITR_EL2.nGCSPUSHM_EL1 (bit 57) must be initialised to 0b1.
+
+    - HFGRTR_EL2.nGCS_EL1 (bit 53) must be initialised to 0b1.
+
+    - HFGRTR_EL2.nGCS_EL0 (bit 52) must be initialised to 0b1.
+
+    - HFGWTR_EL2.nGCS_EL1 (bit 53) must be initialised to 0b1.
+
+    - HFGWTR_EL2.nGCS_EL0 (bit 52) must be initialised to 0b1.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.  Where the values documented

-- 
2.39.2




More information about the linux-riscv mailing list