[PATCH v3 1/1] riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function
E Shattow
e at freeshell.de
Mon Nov 25 23:38:17 PST 2024
Pine64 Star64 set JH7110 on-chip USB host mode and vbus pin assignment
Signed-off-by: E Shattow <e at freeshell.de>
---
.../boot/dts/starfive/jh7110-pine64-star64.dts | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index fe4a490ecc61..b764d4d92fd9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -80,7 +80,23 @@ &spi0 {
status = "okay";
};
+&sysgpio {
+ usb0_pins: usb0-0 {
+ vbus-pins {
+ pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+};
+
&usb0 {
- dr_mode = "peripheral";
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
status = "okay";
};
--
2.45.2
More information about the linux-riscv
mailing list