[PATCH v3 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
Troy Mitchell
troymitchell988 at gmail.com
Wed Nov 20 20:11:19 PST 2024
Hi, Yixun. thanks for ur review.
On 2024/11/14 14:49, Yixun Lan wrote:
> On 11:07 Tue 12 Nov , Troy Mitchell wrote:
>> From: Troy Mitchell <troymitchell988 at gmail.com>
>>
>> This patch introduces basic I2C support for the SpacemiT K1 SoC,
>> utilizing interrupts for transfers.
>>
>> The driver has been tested using i2c-tools on a Bananapi-F3 board,
>> and basic I2C read/write operations have been confirmed to work.
>>
>> Signed-off-by: Troy Mitchell <TroyMitchell988 at gmail.com>
>> ---
>> drivers/i2c/busses/Kconfig | 19 ++
>> drivers/i2c/busses/Makefile | 1 +
>> drivers/i2c/busses/i2c-k1.c | 656 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 676 insertions(+)
>>
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index 6b3ba7e5723a..91630f55667f 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -779,6 +779,25 @@ config I2C_JZ4780
>>
>> If you don't know what to do here, say N.
>>
>> +config I2C_K1
>> + tristate "Spacemit K1 I2C adapter"
>> + depends on ARCH_SPACEMIT || COMPILE_TEST
>> + depends on OF
>> + help
>> + This option enables support for the I2C interface on the Spacemit K1
>> + platform.
>> +
>> + If you enable this configuration, the kernel will include support for
>> + the I2C adapter specific to the Spacemit K1 platform. This driver ca
>> + be used to manage I2C bus transactions, which are necessary for
>> + interfacing with I2C peripherals such as sensors, EEPROMs, and other
>> + devices.
>> +
>> + This driver can also be compiled as a module. If you choose to build
>> + it as a module, the resulting kernel module will be named `i2c-k1`.
>> + Loading this module will enable the I2C functionality for the K1
>> + platform dynamically, without requiring a rebuild of the kernel.
>> +
>> config I2C_KEBA
>> tristate "KEBA I2C controller support"
>> depends on HAS_IOMEM
>> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>> index ecc07c50f2a0..9744b0e58598 100644
>> --- a/drivers/i2c/busses/Makefile
>> +++ b/drivers/i2c/busses/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
>> obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-lpi2c.o
>> obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
>> obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
>> +obj-$(CONFIG_I2C_K1) += i2c-k1.o
>> obj-$(CONFIG_I2C_KEBA) += i2c-keba.o
>> obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
>> obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
>> diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
>> new file mode 100644
>> index 000000000000..12bb71625e0a
>> --- /dev/null
>> +++ b/drivers/i2c/busses/i2c-k1.c
>> @@ -0,0 +1,656 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2024 Troy Mitchell <troymitchell988 at gmail.com>
>> + */
>> +
>> + #include <linux/clk.h>
>> + #include <linux/i2c.h>
>> + #include <linux/iopoll.h>
>> + #include <linux/module.h>
>> + #include <linux/of_address.h>
>> + #include <linux/platform_device.h>
>> +
>> +/* spacemit i2c registers */
>> +#define ICR 0x0 /* Control Register */
>> +#define ISR 0x4 /* Status Register */
>> +#define ISAR 0x8 /* Slave Address Register */
>> +#define IDBR 0xc /* Data Buffer Register */
>> +#define ILCR 0x10 /* Load Count Register */
>> +#define IWCR 0x14 /* Wait Count Register */
>> +#define IRST_CYC 0x18 /* Bus reset cycle counter */
>> +#define IBMR 0x1c /* Bus monitor register */
>> +#define IWFIFO 0x20 /* Write FIFO Register */
>> +#define IWFIFO_WPTR 0x24 /* Write FIFO Write Pointer Register */
>> +#define IWFIFO_RPTR 0x28 /* Write FIFO Read Pointer Register */
>> +#define IRFIFO 0x2c /* Read FIFO Register */
>> +#define IRFIFO_WPTR 0x30 /* Read FIFO Write Pointer Register */
>> +#define IRFIFO_RPTR 0x34 /* Read FIFO Read Pointer Register */
>> +
>> +/* register ICR fields */
>> +#define CR_START BIT(0) /* start bit */
>> +#define CR_STOP BIT(1) /* stop bit */
>> +#define CR_ACKNAK BIT(2) /* send ACK(0) or NAK(1) */
>> +#define CR_TB BIT(3) /* transfer byte bit */
>> +#define CR_TXBEGIN BIT(4) /* transaction begin */
>> +#define CR_FIFOEN BIT(5) /* enable FIFO mode */
>> +#define CR_GPIOEN BIT(6) /* enable GPIO mode for SCL in HS */
>> +#define CR_DMAEN BIT(7) /* enable DMA for TX and RX FIFOs */
>> +#define CR_MODE_FAST BIT(8) /* bus mode (master operation) */
>> +#define CR_MODE_HIGH BIT(9) /* bus mode (master operation) */
>> +#define CR_UR BIT(10) /* unit reset */
>> +#define CR_RSTREQ BIT(11) /* i2c bus reset request */
>> +#define CR_MA BIT(12) /* master abort */
>> +#define CR_SCLE BIT(13) /* master clock enable */
>> +#define CR_IUE BIT(14) /* unit enable */
>> +#define CR_HS_STRETCH BIT(16) /* I2C hs stretch */
>> +#define CR_ALDIE BIT(18) /* enable arbitration interrupt */
>> +#define CR_DTEIE BIT(19) /* enable tx interrupts */
>> +#define CR_DRFIE BIT(20) /* enable rx interrupts */
>> +#define CR_GCD BIT(21) /* general call disable */
>> +#define CR_BEIE BIT(22) /* enable bus error ints */
>> +#define CR_SADIE BIT(23) /* slave address detected int enable */
>> +#define CR_SSDIE BIT(24) /* slave STOP detected int enable */
>> +#define CR_MSDIE BIT(25) /* master STOP detected int enable */
>> +#define CR_MSDE BIT(26) /* master STOP detected enable */
>> +#define CR_TXDONEIE BIT(27) /* transaction done int enable */
>> +#define CR_TXEIE BIT(28) /* transmit FIFO empty int enable */
>> +#define CR_RXHFIE BIT(29) /* receive FIFO half-full int enable */
>> +#define CR_RXFIE BIT(30) /* receive FIFO full int enable */
>> +#define CR_RXOVIE BIT(31) /* receive FIFO overrun int enable */
>> +
>> +/* register ISR fields */
>> +#define SR_RWM BIT(13) /* read/write mode */
>> +#define SR_ACKNAK BIT(14) /* ACK/NACK status */
>> +#define SR_UB BIT(15) /* unit busy */
>> +#define SR_IBB BIT(16) /* i2c bus busy */
>> +#define SR_EBB BIT(17) /* early bus busy */
>> +#define SR_ALD BIT(18) /* arbitration loss detected */
>> +#define SR_ITE BIT(19) /* tx buffer empty */
>> +#define SR_IRF BIT(20) /* rx buffer full */
>> +#define SR_GCAD BIT(21) /* general call address detected */
>> +#define SR_BED BIT(22) /* bus error no ACK/NAK */
>> +#define SR_SAD BIT(23) /* slave address detected */
>> +#define SR_SSD BIT(24) /* slave stop detected */
>> +#define SR_MSD BIT(26) /* master stop detected */
>> +#define SR_TXDONE BIT(27) /* transaction done */
>> +#define SR_TXE BIT(28) /* tx FIFO empty */
>> +#define SR_RXHF BIT(29) /* rx FIFO half-full */
>> +#define SR_RXF BIT(30) /* rx FIFO full */
>> +#define SR_RXOV BIT(31) /* RX FIFO overrun */
>> +
>> +/* register ILCR fields */
>> +#define LCR_SLV 0x000001FF /* SLV: bit[8:0] */
>> +#define LCR_FLV 0x0003FE00 /* FLV: bit[17:9] */
>> +#define LCR_HLVH 0x07FC0000 /* HLVH: bit[26:18] */
>> +#define LCR_HLVL 0xF8000000 /* HLVL: bit[31:27] */
>> +
>> +/* register IWCR fields */
>> +#define WCR_COUNT 0x0000001F /* COUNT: bit[4:0] */
>> +#define WCR_COUNT1 0x000003E0 /* HS_COUNT1: bit[9:5] */
>> +#define WCR_COUNT2 0x00007C00 /* HS_COUNT2: bit[14:10] */
>> +
>> +/* register IBMR fields */
>> +#define BMR_SDA BIT(0) /* SDA line level */
>> +#define BMR_SCL BIT(1) /* SCL line level */
>> +
>> +/* register IWFIFO fields */
>> +#define WFIFO_DATA_MSK 0x000000FF /* data: bit[7:0] */
>> +#define WFIFO_CTRL_MSK 0x000003E0 /* control: bit[11:8] */
>> +#define WFIFO_CTRL_START BIT(8) /* start bit */
>> +#define WFIFO_CTRL_STOP BIT(9) /* stop bit */
>> +#define WFIFO_CTRL_ACKNAK BIT(10) /* send ACK(0) or NAK(1) */
>> +#define WFIFO_CTRL_TB BIT(11) /* transfer byte bit */
>> +
>> +/* status register init value */
>> +#define I2C_INT_STATUS_MASK 0xfffc0000 /* SR bits[31:18] */
>> +#define I2C_INT_CTRL_MASK (CR_ALDIE | CR_DTEIE | CR_DRFIE | \
>> + CR_BEIE | CR_TXDONEIE | CR_TXEIE | \
>> + CR_RXHFIE | CR_RXFIE | CR_RXOVIE | \
>> + CR_MSDIE)
>> +
>> +/* i2c bus recover timeout: us */
>> +#define I2C_BUS_RECOVER_TIMEOUT (100000)
>> +
>> +#define I2C_FAST_MODE_FREQ (400000)
>> +
>> +enum spacemit_i2c_state {
>> + STATE_IDLE,
>> + STATE_START,
>> + STATE_READ,
>> + STATE_WRITE,
>> +};
>> +
>> +enum spacemit_i2c_dir {
>> + DIR_WRITE,
>> + DIR_READ
>> +};
>> +
>> +/* i2c-spacemit driver's main struct */
>> +struct spacemit_i2c_dev {
>> + struct device *dev;
>> + struct i2c_adapter adapt;
>> +
>> + /* hardware resources */
>> + void __iomem *base;
>> + int irq;
>> +
>> + struct i2c_msg *msgs;
>> + int msg_num;
>> + struct i2c_msg *cur_msg;
>> +
>> + /* index of the current message being processed */
>> + int msg_idx;
>> + u8 *msg_buf;
>> + /* the number of unprocessed bytes remaining in each message */
>> + size_t unprocessed;
>> +
>> + enum spacemit_i2c_state state;
>> + enum spacemit_i2c_dir dir;
>> + struct completion complete;
>> + u32 status;
>> + u32 err;
>> +};
>> +
>> +static void spacemit_i2c_enable(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 val;
>> +
>> + val = readl(i2c->base + ICR);
>> + writel(val | CR_IUE, i2c->base + ICR);
>> +}
>> +
>> +static void spacemit_i2c_disable(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 val;
>> +
>> + val = readl(i2c->base + ICR);
>> + val &= ~CR_IUE;
>> + writel(val, i2c->base + ICR);
>> +}
>> +
>> +static void spacemit_i2c_reset(struct spacemit_i2c_dev *i2c)
>> +{
>> + writel(CR_UR, i2c->base + ICR);
>> + udelay(5);
>> + writel(0, i2c->base + ICR);
>> +}
>> +
>> +static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c);
>> +
>> +static void spacemit_i2c_bus_reset(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 status;
>> +
>> + /* if bus is locked, reset unit. 0: locked */
>> + status = readl(i2c->base + IBMR);
>> + if ((status & BMR_SDA) && (status & BMR_SCL))
>> + return;
>> +
>> + spacemit_i2c_reset(i2c);
>> + usleep_range(10, 20);
>> +
>> + /* check scl status again */
>> + status = readl(i2c->base + IBMR);
>> + if (!(status & BMR_SCL))
>> + dev_warn_ratelimited(i2c->dev, "unit reset failed\n");
>> +}
>> +
>> +static int spacemit_i2c_recover_bus_busy(struct spacemit_i2c_dev *i2c)
>> +{
>> + int ret = 0;
>> + u32 val;
>> +
>> + val = readl(i2c->base + ISR);
>> + if (likely(!(val & (SR_UB | SR_IBB))))
>> + return 0;
>> +
>> + ret = readl_poll_timeout(i2c->base + ISR, val, !(val & (SR_UB | SR_IBB)),
>> + 1500, I2C_BUS_RECOVER_TIMEOUT);
>> + if (unlikely(ret)) {
>> + spacemit_i2c_reset(i2c);
>> + ret = -EAGAIN;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void spacemit_i2c_check_bus_release(struct spacemit_i2c_dev *i2c)
>> +{
>> + /* in case bus is not released after transfer completes */
>> + if (unlikely(readl(i2c->base + ISR) & SR_EBB)) {
>> + spacemit_i2c_bus_reset(i2c);
>> + usleep_range(90, 150);
>> + }
>> +}
>> +
>> +static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 val = 0;
>> +
>> + /*
>> + * Unmask interrupt bits for all xfer mode:
>> + * bus error, arbitration loss detected.
>> + * For transaction complete signal, we use master stop
>> + * interrupt, so we don't need to unmask CR_TXDONEIE.
>> + */
>> + val |= CR_BEIE | CR_ALDIE;
>> +
>> + /*
>> + * Unmask interrupt bits for interrupt xfer mode:
>> + * DBR rx full.
>> + * For tx empty interrupt CR_DTEIE, we only
>> + * need to enable when trigger byte transfer to start
>> + * data sending.
>> + */
>> + val |= CR_DRFIE;
>> +
>> + /* set speed bits: default fast mode */
>> + val |= CR_MODE_FAST;
>> +
>> + /* disable response to general call */
>> + val |= CR_GCD;
>> +
>> + /* enable SCL clock output */
>> + val |= CR_SCLE;
>> +
>> + /* enable master stop detected */
>> + val |= CR_MSDE | CR_MSDIE;
>> +
>> + writel(val, i2c->base + ICR);
>> +}
>> +
>> +static inline void
>> +spacemit_i2c_clear_int_status(struct spacemit_i2c_dev *i2c, u32 mask)
>> +{
>> + writel(mask & I2C_INT_STATUS_MASK, i2c->base + ISR);
>> +}
>> +
>> +static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 slave_addr_rw, val;
>> +
>> + i2c->dir = i2c->cur_msg->flags & I2C_M_RD;
>> + i2c->state = STATE_START;
>> +
>> + if (i2c->cur_msg->flags & I2C_M_RD)
>> + slave_addr_rw = ((i2c->cur_msg->addr & 0x7f) << 1) | 1;
>> + else
>> + slave_addr_rw = (i2c->cur_msg->addr & 0x7f) << 1;
>> +
>> + writel(slave_addr_rw, i2c->base + IDBR);
>> +
>> + val = readl(i2c->base + ICR);
>> +
>> + /* send start pulse */
>> + val &= ~CR_STOP;
>> + val |= CR_START | CR_TB | CR_DTEIE;
>> + writel(val, i2c->base + ICR);
>> +}
>> +
>> +static void spacemit_i2c_stop(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 val;
>> +
>> + val = readl(i2c->base + ICR);
>> +
>> + val |= CR_STOP | CR_ALDIE | CR_TB;
>> +
>> + if (i2c->dir == DIR_READ)
>> + val |= CR_ACKNAK;
>> +
>> + writel(val, i2c->base + ICR);
>> +}
>> +
>> +static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c)
>> +{
>> + unsigned long time_left;
>> +
>> + for (i2c->msg_idx = 0; i2c->msg_idx < i2c->msg_num; i2c->msg_idx++) {
>> + i2c->cur_msg = i2c->msgs + i2c->msg_idx;
>> + i2c->msg_buf = i2c->cur_msg->buf;
>> + i2c->err = 0;
>> + i2c->status = 0;
>> + i2c->unprocessed = i2c->cur_msg->len;
>> +
>> + reinit_completion(&i2c->complete);
>> +
>> + spacemit_i2c_start(i2c);
>> +
>> + time_left = wait_for_completion_timeout(&i2c->complete,
>> + i2c->adapt.timeout);
>> + if (unlikely(time_left == 0)) {
>> + dev_alert(i2c->dev, "msg completion timeout\n");
>> + spacemit_i2c_bus_reset(i2c);
>> + spacemit_i2c_reset(i2c);
>> + return -ETIMEDOUT;
>> + }
>> +
>> + if (unlikely(i2c->err))
>> + return spacemit_i2c_handle_err(i2c);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int spacemit_i2c_is_last_msg(struct spacemit_i2c_dev *i2c)
>> +{
>> + if (i2c->dir == DIR_READ) {
>> + if (i2c->unprocessed == 1 && i2c->msg_idx == i2c->msg_num - 1)
>> + return 1;
>> + } else if (i2c->dir == DIR_WRITE) {
>> + if (!i2c->unprocessed && i2c->msg_idx == i2c->msg_num - 1)
>> + return 1;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void spacemit_i2c_handle_write(struct spacemit_i2c_dev *i2c)
>> +{
>> + /* if transfer completes, ISR will handle it */
>> + if (i2c->status & SR_MSD)
>> + return;
>> +
>> + if (i2c->unprocessed) {
>> + writel(*i2c->msg_buf++, i2c->base + IDBR);
>> + i2c->unprocessed--;
>> + return;
>> + }
>> +
>> + /* STATE_IDLE avoids trigger next byte */
>> + i2c->state = STATE_IDLE;
>> + complete(&i2c->complete);
>> +}
>> +
>> +static void spacemit_i2c_handle_read(struct spacemit_i2c_dev *i2c)
>> +{
>> + if (i2c->unprocessed) {
>> + *i2c->msg_buf++ = readl(i2c->base + IDBR);
>> + i2c->unprocessed--;
>> + }
>> +
>> + /* if transfer completes, ISR will handle it */
>> + if (i2c->status & (SR_MSD | SR_ACKNAK))
>> + return;
>> +
>> + /* it has to append stop bit in icr that read last byte */
>> + if (i2c->unprocessed)
>> + return;
>> +
>> + /* STATE_IDLE avoids trigger next byte */
>> + i2c->state = STATE_IDLE;
>> + complete(&i2c->complete);
>> +}
>> +
>> +static void spacemit_i2c_handle_start(struct spacemit_i2c_dev *i2c)
>> +{
>> + if (i2c->dir == DIR_READ) {
>> + i2c->state = STATE_READ;
>> + return;
>> + }
>> +
>> + if (i2c->dir == DIR_WRITE) {
>> + i2c->state = STATE_WRITE;
>> + spacemit_i2c_handle_write(i2c);
>> + }
>> +}
>> +
>> +static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c)
>> +{
>> + if (!i2c->err)
>> + return 0;
>> +
>> + dev_dbg(i2c->dev, "i2c error status: 0x%08x\n", i2c->status);
>> +
>> + if (i2c->err & (SR_BED | SR_ALD))
>> + spacemit_i2c_reset(i2c);
>> +
>> + if (i2c->err & (SR_RXOV | SR_ALD))
>> + return -EAGAIN;
>> +
>> + return (i2c->status & SR_ACKNAK) ? -ENXIO : -EIO;
>> +}
>> +
>> +static void spacemit_i2c_err_check(struct spacemit_i2c_dev *i2c)
>> +{
>> + u32 val;
>> + /*
>> + * send transaction complete signal:
>> + * error happens, detect master stop
>> + */
>> + if (likely(i2c->err || (i2c->status & SR_MSD))) {
>> + /*
>> + * Here the transaction is already done, we don't need any
>> + * other interrupt signals from now, in case any interrupt
>> + * happens before spacemit_i2c_xfer to disable irq and i2c unit,
>> + * we mask all the interrupt signals and clear the interrupt
>> + * status.
>> + */
>> + val = readl(i2c->base + ICR);
>> + val &= ~I2C_INT_CTRL_MASK;
>> + writel(val, i2c->base + ICR);
>> +
>> + spacemit_i2c_clear_int_status(i2c, I2C_INT_STATUS_MASK);
>> +
>> + i2c->state = STATE_IDLE;
>> + complete(&i2c->complete);
>> + }
>> +}
>> +
>> +static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid)
>> +{
>> + struct spacemit_i2c_dev *i2c = devid;
>> + u32 status, val;
>> +
>> + status = readl(i2c->base + ISR);
>> + if (!status)
>> + return IRQ_HANDLED;
>> +
>> + i2c->status = status;
>> +
>> + i2c->err = status & (SR_BED | SR_RXOV | SR_ALD);
>> +
>> + spacemit_i2c_clear_int_status(i2c, status);
>> +
>> + if (unlikely(i2c->err))
>> + goto err_out;
>> +
>> + val = readl(i2c->base + ICR);
>> +
>> + val &= ~(CR_TB | CR_ACKNAK | CR_STOP | CR_START);
>> + writel(val, i2c->base + ICR);
>> +
>> + switch (i2c->state) {
>> + case STATE_START:
>> + spacemit_i2c_handle_start(i2c);
>> + break;
>> + case STATE_READ:
>> + spacemit_i2c_handle_read(i2c);
>> + break;
>> + case STATE_WRITE:
>> + spacemit_i2c_handle_write(i2c);
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + if (i2c->state != STATE_IDLE) {
>> + if (spacemit_i2c_is_last_msg(i2c)) {
>> + /* trigger next byte with stop */
>> + spacemit_i2c_stop(i2c);
>> + } else {
>> + /* trigger next byte */
>> + val |= CR_ALDIE | CR_TB;
>> + writel(val, i2c->base + ICR);
>> + }
>> + }
>> +
>> +err_out:
>> + spacemit_i2c_err_check(i2c);
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void spacemit_i2c_calc_timeout(struct spacemit_i2c_dev *i2c)
>> +{
>> + unsigned long timeout;
>> + int idx = 0, cnt = 0, freq;
>> +
>> + while (idx < i2c->msg_num) {
>> + cnt += (i2c->msgs + idx)->len + 1;
>> + idx++;
>> + }
>> +
>> + freq = I2C_FAST_MODE_FREQ;
> so this will set frequency to fast mode (400K), this contradict with PATCH[1/2] which
> says default clock-frequency is 100000, either you need to change the code? or
> update the dt-binding?
I will update the dt-binding in next version.
>
>> + /*
>> + * multiply by 9 because each byte in I2C transmission requires
>> + * 9 clock cycles: 8 bits of data plus 1 ACK/NACK bit.
>> + */
>> + timeout = cnt * 9 * USEC_PER_SEC / freq;
>> +
>> + i2c->adapt.timeout = usecs_to_jiffies(timeout + USEC_PER_SEC / 2) / i2c->msg_num;
>> +}
>> +
>> +static inline int spacemit_i2c_xfer_core(struct spacemit_i2c_dev *i2c)
> drop inline? IMO, it isn't worth here for long function
okay
>
>> +{
>> + int ret = 0;
> no need to initilize to 0
ok
>> +
>> + spacemit_i2c_reset(i2c);
>> +
>> + spacemit_i2c_calc_timeout(i2c);
>> +
>> + spacemit_i2c_init(i2c);
>> +
>> + spacemit_i2c_enable(i2c);
>> + enable_irq(i2c->irq);
>> +
>> + /* i2c wait for bus busy */
>> + ret = spacemit_i2c_recover_bus_busy(i2c);
>> + if (unlikely(ret))
>> + return ret;
>> +
>> + ret = spacemit_i2c_xfer_msg(i2c);
>> + if (unlikely(ret < 0)) {
>> + dev_dbg(i2c->dev, "i2c transfer error\n");
>> + /* timeout error should not be overridden, and the transfer
>> + * error will be confirmed by err handle function latter,
>> + * the reset should be invalid argument error.
>> + */
>> + if (ret != -ETIMEDOUT)
>> + ret = -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int
>> +spacemit_i2c_xfer(struct i2c_adapter *adapt, struct i2c_msg msgs[], int num)
> no need to wrap the line, it makes the code a little bit weird..
>
> current policy increase to 100characters, the old 80-column is not enforced
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bdc48fa11e46f867ea4d75fa59ee87a7f48be144
ok
>
>> +{
>> + struct spacemit_i2c_dev *i2c = i2c_get_adapdata(adapt);
>> + int ret;
>> +
>> + i2c->msgs = msgs;
>> + i2c->msg_num = num;
>> +
>> + ret = spacemit_i2c_xfer_core(i2c);
>> + if (likely(!ret))
>> + spacemit_i2c_check_bus_release(i2c);
>> +
>> + disable_irq(i2c->irq);
>> +
>> + spacemit_i2c_disable(i2c);
>> +
>> + if (unlikely((ret == -ETIMEDOUT || ret == -EAGAIN)))
>> + dev_alert(i2c->dev, "i2c transfer failed, ret %d err 0x%x\n", ret, i2c->err);
>> +
>> + return ret < 0 ? ret : num;
>> +}
>> +
>> +static u32 spacemit_i2c_func(struct i2c_adapter *adap)
>> +{
>> + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
>> +}
>> +
>> +static const struct i2c_algorithm spacemit_i2c_algo = {
>> + .xfer = spacemit_i2c_xfer,
>> + .functionality = spacemit_i2c_func,
>> +};
>> +
>> +static int spacemit_i2c_probe(struct platform_device *pdev)
>> +{
>> + struct spacemit_i2c_dev *i2c;
>> + struct device_node *of_node = pdev->dev.of_node;
>> + struct clk *clk;
>> + int ret = 0;
>> +
>> + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
>> + if (!i2c)
>> + return -ENOMEM;
>> +
>> + i2c->dev = &pdev->dev;
>> +
>> + i2c->base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(i2c->base))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(i2c->base), "failed to do ioremap");
>> +
>> + i2c->irq = platform_get_irq(pdev, 0);
>> + if (i2c->irq < 0)
>> + return dev_err_probe(&pdev->dev, i2c->irq, "failed to get irq resource");
>> +
>> + ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler,
>> + IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(i2c->dev), i2c);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "failed to request irq");
>> +
>> + disable_irq(i2c->irq);
>> +
>> + clk = devm_clk_get_enabled(&pdev->dev, NULL);
>> + if (IS_ERR(clk))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(clk), "failed to enable clock");
>> +
> I'd suggest also to handle pin request here, since pinctrl driver is merged
>
> https://lore.kernel.org/all/CACRpkdYnaJsKKfcdhHeMGTTp86M+wNODzZx2e=OYbxQ4Jc4Rjw@mail.gmail.com/
sry, I don't understand what pin I need to request?
>
>> + i2c_set_adapdata(&i2c->adapt, i2c);
>> + i2c->adapt.owner = THIS_MODULE;
>> + i2c->adapt.algo = &spacemit_i2c_algo;
>> + i2c->adapt.dev.parent = i2c->dev;
>> + i2c->adapt.nr = pdev->id;
>> +
>> + i2c->adapt.dev.of_node = of_node;
>> + i2c->adapt.algo_data = i2c;
>> +
>> + strscpy(i2c->adapt.name, "spacemit-i2c-adapter", sizeof(i2c->adapt.name));
>> +
>> + init_completion(&i2c->complete);
>> +
>> + ret = i2c_add_numbered_adapter(&i2c->adapt);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "failed to add i2c adapter");
>> +
>> + platform_set_drvdata(pdev, i2c);
>> +
>> + return 0;
>> +}
>> +
>> +static void spacemit_i2c_remove(struct platform_device *pdev)
>> +{
>> + struct spacemit_i2c_dev *i2c = platform_get_drvdata(pdev);
>> +
>> + i2c_del_adapter(&i2c->adapt);
>> +}
>> +
>> +static const struct of_device_id spacemit_i2c_of_match[] = {
>> + { .compatible = "spacemit,k1-i2c", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, spacemit_i2c_of_match);
>> +
>> +static struct platform_driver spacemit_i2c_driver = {
>> + .probe = spacemit_i2c_probe,
>> + .remove = spacemit_i2c_remove,
>> + .driver = {
>> + .name = "i2c-k1",
>> + .of_match_table = spacemit_i2c_of_match,
>> + },
>> +};
>> +module_platform_driver(spacemit_i2c_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("I2C bus driver for SpacemiT K1 SoC");
>>
>> --
>> 2.34.1
>>
>
--
Troy Mitchell
More information about the linux-riscv
mailing list