[PATCH v3 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

[E Shattow]

Enable host mode JH7110 on-chip USB for Milk-V Mars by setting host mode
and connect vbus pinctrl.

This functionality depends on setting the USB over-current register to disable at bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@starfivetech.com/

If the over-current register is not prepared for us then the result is no
change in functional outcome with this patch applied; there is an error
visible to the user and this additional usb configuration fails (same as
it is now). The existing three VL805 connected USB ports via PCIe on
Milk-V Mars are not affected.

Changes since v2:
 - Rebase on 6.12

Changes since v1:
 - series name (was "[PATCH] riscv: dts: starfive: jh7110-milkv-mars: set host mode and vbus pin for on-chip USB 2.0")
 - adjust pin label to obey dtschema
 - use cover letter

E Shattow (1):
  riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

 .../boot/dts/starfive/jh7110-milkv-mars.dts   | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

-- 
2.45.2