[PATCH v6 0/2] PCI: microchip: support using either instance 1 or 2

[Conor Dooley]

On Thu, Nov 07, 2024 at 08:57:15AM -0600, Bjorn Helgaas wrote:
> On Thu, Nov 07, 2024 at 10:59:33AM +0000, Conor Dooley wrote:
> > From: Conor Dooley <conor.dooley at microchip.com>
> > 
> > The current driver and binding for PolarFire SoC's PCI controller assume
> > that the root port instance in use is instance 1. The second reg
> > property constitutes the region encompassing both "control" and "bridge"
> > registers for both instances. In the driver, a fixed offset is applied to
> > find the base addresses for instance 1's "control" and "bridge"
> > registers. The BeagleV Fire uses root port instance 2, so something must
> > be done so that software can differentiate. This series splits the
> > second reg property in two, with dedicated "control" and "bridge"
> > entries so that either instance can be used.
> > 
> > Cheers,
> > Conor.
> > 
> > v6:
> > - rework commit messages to use Bjorn's preferred "root port" and "root
> >   complex" wording
> > 
> > v5:
> > - rebase on top of 6.11-rc1, which brought about a lot of driver change
> >   due to the plda common driver creation - although little actually
> >   changed in terms of the lines edited in this patch.
> > 
> > v4:
> > - fix a cocci warning reported off list about an inconsistent variable
> >   used between IS_ERR() and PTR_ERR() calls.
> > 
> > v3:
> > - rename a variable in probe s/axi/apb/
> > 
> > v2:
> > - try the new reg format before the old one to avoid warnings in the
> >   good case
> > - reword $subject for 2/2
> > 
> > CC: Daire McNamara <daire.mcnamara at microchip.com>
> > CC: Lorenzo Pieralisi <lpieralisi at kernel.org>
> > CC: Krzysztof Wilczyński <kw at linux.com>
> > CC: Rob Herring <robh at kernel.org>
> > CC: Bjorn Helgaas <bhelgaas at google.com>
> > CC: Krzysztof Kozlowski <krzk+dt at kernel.org>
> > CC: Conor Dooley <conor+dt at kernel.org>
> > CC: linux-pci at vger.kernel.org
> > CC: devicetree at vger.kernel.org
> > CC: linux-kernel at vger.kernel.org
> > CC: linux-riscv at lists.infradead.org
> > 
> > Conor Dooley (2):
> >   dt-bindings: PCI: microchip,pcie-host: fix reg properties
> >   PCI: microchip: rework reg region handing to support using either root
> >     port 1 or 2
> > 
> >  .../bindings/pci/microchip,pcie-host.yaml     |  11 +-
> >  .../pci/plda,xpressrich3-axi-common.yaml      |  14 ++-
> >  .../bindings/pci/starfive,jh7110-pcie.yaml    |   7 ++
> >  .../pci/controller/plda/pcie-microchip-host.c | 116 +++++++++---------
> >  4 files changed, 87 insertions(+), 61 deletions(-)
> 
> Thanks!  The patches themselves are unchanged between v5 and v6.  I
> replaced the v5 patches on pci/controller/microchip with these.
> 
> I also capitalized "Root Port" and "Root Complex" to give a hint that
> they are proper nouns defined by the PCIe spec.

Cool, thanks for doing that.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20241107/14a3fcef/attachment.sig>