[PATCH v6 1/2] dt-bindings: PCI: microchip,pcie-host: fix reg properties

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

The PCI host controller on PolarFire SoC has multiple root port
instances, each with their own bridge and ctrl address spaces. The
original binding has an "apb" register region, and it is expected to
be set to the base address of the root complex' register space. Some
defines in the Linux driver were used to compute the addresses of the
bridge and ctrl address ranges corresponding to root port instance 1.
Some customers want to use root port instance 2 however, which requires
changing the defines in the driver, which is clearly not a portable
solution.

Remove this "apb" register region from the binding and add "bridge" &
"ctrl" regions instead, that will directly communicate the address of
these regions for a specific root port.

Fixes: 6ee6c89aac35 ("dt-bindings: PCI: microchip: Add Microchip PolarFire host binding")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Acked-by: Daire McNamara <daire.mcnamara at microchip.com>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../bindings/pci/microchip,pcie-host.yaml          | 11 +++++++++--
 .../bindings/pci/plda,xpressrich3-axi-common.yaml  | 14 ++++++++++----
 .../bindings/pci/starfive,jh7110-pcie.yaml         |  7 +++++++
 3 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index 612633ba59e2..2e1547569702 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -17,6 +17,12 @@ properties:
   compatible:
     const: microchip,pcie-host-1.0 # PolarFire
 
+  reg:
+    minItems: 3
+
+  reg-names:
+    minItems: 3
+
   clocks:
     description:
       Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -62,8 +68,9 @@ examples:
             pcie0: pcie at 2030000000 {
                     compatible = "microchip,pcie-host-1.0";
                     reg = <0x0 0x70000000 0x0 0x08000000>,
-                          <0x0 0x43000000 0x0 0x00010000>;
-                    reg-names = "cfg", "apb";
+                          <0x0 0x43008000 0x0 0x00002000>,
+                          <0x0 0x4300a000 0x0 0x00002000>;
+                    reg-names = "cfg", "bridge", "ctrl";
                     device_type = "pci";
                     #address-cells = <3>;
                     #size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
index 7a57a80052a0..039eecdbd6aa 100644
--- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -18,12 +18,18 @@ allOf:
 
 properties:
   reg:
-    maxItems: 2
+    maxItems: 3
+    minItems: 2
 
   reg-names:
-    items:
-      - const: cfg
-      - const: apb
+    oneOf:
+      - items:
+          - const: cfg
+          - const: apb
+      - items:
+          - const: cfg
+          - const: bridge
+          - const: ctrl
 
   interrupts:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
index 67151aaa3948..5f432452c815 100644
--- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -16,6 +16,13 @@ properties:
   compatible:
     const: starfive,jh7110-pcie
 
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
+
   clocks:
     items:
       - description: NOC bus clock
-- 
2.45.2