[PATCH v2 2/2] i2c: spacemit: add support for SpacemiT K1 SoC

[Troy Mitchell]

On 2024/10/28 13:32, Troy Mitchell wrote:
> This patch introduces basic I2C support for the SpacemiT K1 SoC,
> utilizing interrupts for transfers.
> 
> The driver has been tested using i2c-tools on a Bananapi-F3 board,
> and basic I2C read/write operations have been confirmed to work.
> 
> Signed-off-by: Troy Mitchell <TroyMitchell988 at gmail.com>
> ---
>  drivers/i2c/busses/Kconfig  |  18 +
>  drivers/i2c/busses/Makefile |   1 +
>  drivers/i2c/busses/i2c-k1.c | 658 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 677 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-k1.c
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 6b3ba7e5723a..38ebfd38dc41 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -779,6 +779,24 @@ config I2C_JZ4780
>  
>  	 If you don't know what to do here, say N.
>  
> +config I2C_K1
> +	tristate "Spacemit K1 I2C adapter"
> +	depends on HAS_IOMEM
I think I should retain the depends on from v1, like this:
depends on ARCH_SPACEMIT || COMPILE_TEST

Krzysztof mentioned that there is no such thing as ARCH_SPACEMIT, that's because
this patch depends on the basic DT from dlan:
https://lore.kernel.org/all/20240730-k1-01-basic-dt-v5-0-98263aae83be@gentoo.org/
> +	help
> +	  This option enables support for the I2C interface on the Spacemit K1
> +	  platform.
> +
> +	  If you enable this configuration, the kernel will include support for
> +	  the I2C adapter specific to the Spacemit K1 platform. This driver ca
> +	  be used to manage I2C bus transactions, which are necessary for
> +	  interfacing with I2C peripherals such as sensors, EEPROMs, and other
> +	  devices.
> +
> +	  This driver can also be compiled as a module. If you choose to build
> +	  it as a module, the resulting kernel module will be named `i2c-k1`.
> +	  Loading this module will enable the I2C functionality for the K1
> +	  platform dynamically, without requiring a rebuild of the kernel.
> +
>  config I2C_KEBA
>  	tristate "KEBA I2C controller support"
>  	depends on HAS_IOMEM

-- 
Troy Mitchell