[PATCH v5 0/2] PCI: microchip: support using either instance 1 or 2

[Krzysztof Wilczyński]

Hello,

> The current driver and binding for PolarFire SoC's PCI controller assume
> that the root port instance in use is instance 1. The second reg
> property constitutes the region encompassing both "control" and "bridge"
> registers for both instances. In the driver, a fixed offset is applied to
> find the base addresses for instance 1's "control" and "bridge"
> registers. The BeagleV Fire uses root port instance 2, so something must
> be done so that software can differentiate. This series splits the
> second reg property in two, with dedicated "control" and "bridge"
> entries so that either instance can be used.

Applied to controller/microchip, thank you!

[01/02] PCI: dt-bindings: PCI: microchip,pcie-host: Fix reg properties
        https://git.kernel.org/pci/pci/c/ae5ebdb405dd
[02/02] PCI: microchip: Rework reg region handing to support using either instance 1 or 2
        https://git.kernel.org/pci/pci/c/e071e6bd9940

	Krzysztof