[PATCH 01/11] dt-bindings: riscv: Describe physical memory regions
Rob Herring (Arm)
robh at kernel.org
Fri Nov 1 18:31:28 PDT 2024
On Fri, 01 Nov 2024 17:07:55 -0700, Samuel Holland wrote:
> Information about physical memory regions is needed by both the kernel
> and M-mode firmware. For example, the kernel needs to know about
> noncacheable aliases of cacheable memory in order to allocate coherent
> memory pages for DMA. M-mode firmware needs to know about aliases so it
> can protect itself from lower-privileged software. Firmware also needs
> to know the platform's Physical Address Width in order to efficiently
> implement Smmpt.
>
> The RISC-V Privileged Architecture delegates the description of Physical
> Memory Attributes to the platform. On DT-based platforms, it makes sense
> to put this information in the devicetree.
>
> Signed-off-by: Samuel Holland <samuel.holland at sifive.com>
> ---
>
> .../bindings/riscv/physical-memory.yaml | 101 ++++++++++++++++++
> include/dt-bindings/riscv/physical-memory.h | 44 ++++++++
> 2 files changed, 145 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/riscv/physical-memory.yaml
> create mode 100644 include/dt-bindings/riscv/physical-memory.h
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/riscv/physical-memory.example.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
['starfive,jh7100'] is too short
'starfive,jh7100' is not one of ['beagle,beaglev-starlight-jh7100-r0', 'starfive,visionfive-v1']
'starfive,jh7100' is not one of ['milkv,mars', 'pine64,star64', 'starfive,visionfive-2-v1.2a', 'starfive,visionfive-2-v1.3b']
from schema $id: http://devicetree.org/schemas/riscv/starfive.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/riscv/physical-memory.example.dtb: /: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241102000843.1301099-2-samuel.holland@sifive.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
More information about the linux-riscv
mailing list