[PATCH 1/3] dt-bindings: thermal: sophgo,cv180x-thermal: Add Sophgo CV180x thermal

[Rob Herring (Arm)]

On Thu, 30 May 2024 13:48:25 +0000, Haylen Chu wrote:
> Add devicetree binding documentation for thermal sensors integrated in
> Sophgo CV180X SoCs.
> 
> Signed-off-by: Haylen Chu <heylenay at outlook.com>
> ---
>  .../thermal/sophgo,cv180x-thermal.yaml        | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv180x-thermal.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/sophgo,cv180x-thermal.example.dtb: temperature_sensor at 30e0000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/thermal/sophgo,cv180x-thermal.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/SEYPR01MB4221BD44992A23E2B0061023D7F32@SEYPR01MB4221.apcprd01.prod.exchangelabs.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.