[PATCH v2 1/2] of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()

Rob Herring (Arm) robh at kernel.org
Wed May 29 12:59:20 PDT 2024


Factor out the parsing of interrupt-map interrupt parent phandle and its
arg cells to a separate function, of_irq_parse_imap_parent(), so that it
can be used in other parsing scenarios (e.g. fw_devlink).

There was a refcount leak on non-matching entries when iterating thru
"interrupt-map" which is fixed.

Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
---
 drivers/of/irq.c        | 127 +++++++++++++++++++++++++++++-------------------
 drivers/of/of_private.h |   3 ++
 2 files changed, 79 insertions(+), 51 deletions(-)

diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 174900072c18..a7cdb892991e 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -25,6 +25,8 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 
+#include "of_private.h"
+
 /**
  * irq_of_parse_and_map - Parse and map an interrupt into linux virq space
  * @dev: Device node of the device whose interrupt is to be mapped
@@ -96,6 +98,59 @@ static const char * const of_irq_imap_abusers[] = {
 	NULL,
 };
 
+const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, struct of_phandle_args *out_irq)
+{
+	u32 intsize, addrsize;
+	struct device_node *np;
+
+	/* Get the interrupt parent */
+	if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+		np = of_node_get(of_irq_dflt_pic);
+	else
+		np = of_find_node_by_phandle(be32_to_cpup(imap));
+	imap++;
+
+	/* Check if not found */
+	if (!np) {
+		pr_debug(" -> imap parent not found !\n");
+		return NULL;
+	}
+
+	/* Get #interrupt-cells and #address-cells of new
+		* parent
+		*/
+	if (of_property_read_u32(np, "#interrupt-cells",
+					&intsize)) {
+		pr_debug(" -> parent lacks #interrupt-cells!\n");
+		of_node_put(np);
+		return NULL;
+	}
+	if (of_property_read_u32(np, "#address-cells",
+					&addrsize))
+		addrsize = 0;
+
+	pr_debug(" -> intsize=%d, addrsize=%d\n",
+		intsize, addrsize);
+
+	/* Check for malformed properties */
+	if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS)
+		|| (len < (addrsize + intsize))) {
+		of_node_put(np);
+		return NULL;
+	}
+
+	pr_debug(" -> imaplen=%d\n", len);
+
+	imap += addrsize + intsize;
+
+	out_irq->np = np;
+	for (int i = 0; i < intsize; i++)
+		out_irq->args[i] = be32_to_cpup(imap - intsize + i);
+	out_irq->args_count = intsize;
+
+	return imap;
+}
+
 /**
  * of_irq_parse_raw - Low level interrupt tree parsing
  * @addr:	address specifier (start of "reg" property of the device) in be32 format
@@ -112,12 +167,12 @@ static const char * const of_irq_imap_abusers[] = {
  */
 int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 {
-	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+	struct device_node *ipar, *tnode, *old = NULL;
 	__be32 initial_match_array[MAX_PHANDLE_ARGS];
 	const __be32 *match_array = initial_match_array;
-	const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) };
-	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
-	int imaplen, match, i, rc = -EINVAL;
+	const __be32 *tmp, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) };
+	u32 intsize = 1, addrsize;
+	int i, rc = -EINVAL;
 
 #ifdef DEBUG
 	of_print_phandle_args("of_irq_parse_raw: ", out_irq);
@@ -176,6 +231,9 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 	/* Now start the actual "proper" walk of the interrupt tree */
 	while (ipar != NULL) {
+		int imaplen, match;
+		const __be32 *imap, *oldimap, *imask;
+		struct device_node *newpar;
 		/*
 		 * Now check if cursor is an interrupt-controller and
 		 * if it is then we are done, unless there is an
@@ -216,7 +274,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 		/* Parse interrupt-map */
 		match = 0;
-		while (imaplen > (addrsize + intsize + 1) && !match) {
+		while (imaplen > (addrsize + intsize + 1)) {
 			/* Compare specifiers */
 			match = 1;
 			for (i = 0; i < (addrsize + intsize); i++, imaplen--)
@@ -224,48 +282,17 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 			pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
 
-			/* Get the interrupt parent */
-			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
-				newpar = of_node_get(of_irq_dflt_pic);
-			else
-				newpar = of_find_node_by_phandle(be32_to_cpup(imap));
-			imap++;
-			--imaplen;
-
-			/* Check if not found */
-			if (newpar == NULL) {
-				pr_debug(" -> imap parent not found !\n");
-				goto fail;
-			}
-
-			if (!of_device_is_available(newpar))
-				match = 0;
-
-			/* Get #interrupt-cells and #address-cells of new
-			 * parent
-			 */
-			if (of_property_read_u32(newpar, "#interrupt-cells",
-						 &newintsize)) {
-				pr_debug(" -> parent lacks #interrupt-cells!\n");
-				goto fail;
-			}
-			if (of_property_read_u32(newpar, "#address-cells",
-						 &newaddrsize))
-				newaddrsize = 0;
-
-			pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
-			    newintsize, newaddrsize);
-
-			/* Check for malformed properties */
-			if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS)
-			    || (imaplen < (newaddrsize + newintsize))) {
-				rc = -EFAULT;
+			oldimap = imap;
+			imap = of_irq_parse_imap_parent(oldimap, imaplen, out_irq);
+			if (!imap)
 				goto fail;
-			}
 
-			imap += newaddrsize + newintsize;
-			imaplen -= newaddrsize + newintsize;
+			match &= of_device_is_available(out_irq->np);
+			if (match)
+				break;
 
+			of_node_put(out_irq->np);
+			imaplen -= imap - oldimap;
 			pr_debug(" -> imaplen=%d\n", imaplen);
 		}
 		if (!match) {
@@ -287,11 +314,11 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 		 * Successfully parsed an interrupt-map translation; copy new
 		 * interrupt specifier into the out_irq structure
 		 */
-		match_array = imap - newaddrsize - newintsize;
-		for (i = 0; i < newintsize; i++)
-			out_irq->args[i] = be32_to_cpup(imap - newintsize + i);
-		out_irq->args_count = intsize = newintsize;
-		addrsize = newaddrsize;
+		match_array = oldimap + 1;
+
+		newpar = out_irq->np;
+		intsize = out_irq->args_count;
+		addrsize = (imap - match_array) - intsize;
 
 		if (ipar == newpar) {
 			pr_debug("%pOF interrupt-map entry to self\n", ipar);
@@ -300,7 +327,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 	skiplevel:
 		/* Iterate again with new parent */
-		out_irq->np = newpar;
 		pr_debug(" -> new parent: %pOF\n", newpar);
 		of_node_put(ipar);
 		ipar = newpar;
@@ -310,7 +336,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
  fail:
 	of_node_put(ipar);
-	of_node_put(newpar);
 
 	return rc;
 }
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 94fc0aa07af9..04aa2a91f851 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -159,6 +159,9 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np,
 extern int of_bus_n_addr_cells(struct device_node *np);
 extern int of_bus_n_size_cells(struct device_node *np);
 
+const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len,
+				       struct of_phandle_args *out_irq);
+
 struct bus_dma_region;
 #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA)
 int of_dma_get_range(struct device_node *np,

-- 
2.43.0




More information about the linux-riscv mailing list