[PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards

[Andreas Schwab]

On Mai 29 2024, Emil Renner Berthing wrote:

> Oddly it doesn't work on my Starlight board either. I was thinking the firmware
> might set up pinconf differently, but comparing
>
>   /sys/kernel/debug/pinctrl/11910000.pinctrl-pinctrl-starfive/pinconf-pins
>
> on the two boards shows no differences. I've also not been able to spot any
> differences in how the AP6236 module is connected in the schematics for the two
> boards, so not really sure how to proceed.

I see no difference between Starlight and Visionfive boards, both fail
the same way.

I also see that sometimes the firmware greeting from brcmfmac occurs
_after_ the timeout error from hci0:

# journalctl -b -2 | grep -e brcmf_c_preinit_dcmds -e hci0:
May 16 12:01:54 beaglev kernel: Bluetooth: hci0: command 0x1001 tx timeout
May 16 12:01:54 beaglev kernel: Bluetooth: hci0: BCM: Reading local version info failed (-110)
May 16 12:01:54 beaglev kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021 01:12:21 version 7.45.98.118 (7d96287 CY) FWID 01-32059766

Is this perhaps a race with the firmware loading?

-- 
Andreas Schwab, schwab at linux-m68k.org
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."