[PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards

[Conor Dooley]

Emil,

On Fri, May 10, 2024 at 11:35:34AM +0200, Andreas Schwab wrote:
> On Mai 10 2024, Emil Renner Berthing wrote:
> 
> > You don't include any information useful for debugging this, but if it get's
> > far enough to load the firmware could you at least make sure you run the
> > version below, so that's at least the same.
> >
> > https://github.com/esmil/linux/blob/visionfive/firmware/brcm/BCM43430A1.hcd
> 
> That didn't change anything (and there are no messages related to
> firmware loading from hci_uart).

Looking at things to apply post -rc1, are you still looking into this
issue?

Thanks,
Conor.

> 
> [  +0.879623] Bluetooth: Core ver 2.22
> [  +0.004843] NET: Registered PF_BLUETOOTH protocol family
> [  +0.008787] Bluetooth: HCI device and connection manager initialized
> [  +0.021944] Bluetooth: HCI socket layer initialized
> [  +0.008488] Bluetooth: L2CAP socket layer initialized
> [  +0.006333] Bluetooth: SCO socket layer initialized
> [  +0.097478] Bluetooth: HCI UART driver ver 2.3
> [  +0.007943] Bluetooth: HCI UART protocol H4 registered
> [  +0.006066] Bluetooth: HCI UART protocol BCSP registered
> [  +0.006962] Bluetooth: HCI UART protocol LL registered
> [  +0.000015] Bluetooth: HCI UART protocol ATH3K registered
> [  +0.000084] Bluetooth: HCI UART protocol Three-wire (H5) registered
> [  +0.000247] Bluetooth: HCI UART protocol Intel registered
> [  +0.000455] Bluetooth: HCI UART protocol Broadcom registered
> [  +0.000084] Bluetooth: HCI UART protocol QCA registered
> [  +0.000008] Bluetooth: HCI UART protocol AG6XX registered
> [  +0.000057] Bluetooth: HCI UART protocol Marvell registered
> [  +0.051854] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
> [  +0.000387] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
> [  +0.094658] hci_uart_bcm serial0-0: No reset resource, using default baud rate
> [  +0.990297] Bluetooth: hci0: command 0x1001 tx timeout
> [  +0.022893] Bluetooth: hci0: BCM: Reading local version info failed (-110)
> [  +3.306159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [  +0.013336] Bluetooth: BNEP filters: protocol multicast
> [  +0.124262] Bluetooth: BNEP socket layer initialized
> 
> -- 
> Andreas Schwab, schwab at linux-m68k.org
> GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
> "And now for something completely different."
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240528/1f0cf891/attachment.sig>