[PATCH RFC RESEND 6/6] iommu/riscv: support nested iommu for flushing cache

Jason Gunthorpe jgg at ziepe.ca
Tue May 7 08:08:29 PDT 2024


On Tue, May 07, 2024 at 10:26:00PM +0800, Zong Li wrote:
> This patch implements cache_invalidate_user operation for the userspace
> to flush the hardware caches for a nested domain through iommufd.
> 
> Signed-off-by: Zong Li <zong.li at sifive.com>
> ---
>  drivers/iommu/riscv/iommu.c  | 91 ++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/iommufd.h |  9 ++++
>  2 files changed, 100 insertions(+)
> 
> diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
> index 7eda850df475..4dd58fe2242d 100644
> --- a/drivers/iommu/riscv/iommu.c
> +++ b/drivers/iommu/riscv/iommu.c
> @@ -1522,9 +1522,100 @@ static void riscv_iommu_domain_free_nested(struct iommu_domain *domain)
>  	kfree(riscv_domain);
>  }
>  
> +static int riscv_iommu_fix_user_cmd(struct riscv_iommu_command *cmd,
> +				    unsigned int pscid, unsigned int gscid)
> +{
> +	u32 opcode = FIELD_GET(RISCV_IOMMU_CMD_OPCODE, cmd->dword0);
> +
> +	switch (opcode) {
> +	case RISCV_IOMMU_CMD_IOTINVAL_OPCODE:
> +		u32 func = FIELD_GET(RISCV_IOMMU_CMD_FUNC, cmd->dword0);
> +
> +		if (func != RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA &&
> +		    func != RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA) {
> +			pr_warn("The IOTINVAL function: 0x%x is not supported\n",
> +				func);
> +			return -EOPNOTSUPP;
> +		}
> +
> +		if (func == RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA) {
> +			cmd->dword0 &= ~RISCV_IOMMU_CMD_FUNC;
> +			cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_FUNC,
> +						  RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA);
> +		}
> +
> +		cmd->dword0 &= ~(RISCV_IOMMU_CMD_IOTINVAL_PSCID |
> +				 RISCV_IOMMU_CMD_IOTINVAL_GSCID);
> +		riscv_iommu_cmd_inval_set_pscid(cmd, pscid);
> +		riscv_iommu_cmd_inval_set_gscid(cmd, gscid);
> +		break;
> +	case RISCV_IOMMU_CMD_IODIR_OPCODE:
> +		/*
> +		 * Ensure the device ID is right. We expect that VMM has
> +		 * transferred the device ID to host's from guest's.
> +		 */
> +		break;
> +	default:
> +		pr_warn("The user command: 0x%x is not supported\n", opcode);
> +		return -EOPNOTSUPP;

No userspace triggerable warnings.

> +static int riscv_iommu_cache_invalidate_user(struct iommu_domain *domain,
> +					     struct iommu_user_data_array *array)
> +{
> +	struct riscv_iommu_domain *riscv_domain = iommu_domain_to_riscv(domain);
> +	struct riscv_iommu_device *iommu;
> +	struct riscv_iommu_bond *bond;
> +	struct riscv_iommu_command cmd;
> +	struct iommu_hwpt_riscv_iommu_invalidate inv_info;
> +	int ret, index;
> +
> +	if (!riscv_domain)
> +		return -EINVAL;
> +
> +	/* Assume attached devices in the domain go through the same IOMMU device */

No, you can't assume that.

Jason



More information about the linux-riscv mailing list