[PATCH v1] riscv: defconfig: Enable StarFive JH7110 drivers

Hal Feng hal.feng at starfivetech.com
Sun May 5 19:23:26 PDT 2024


> On 02.05.24 00:09, Palmer Dabbelt wrote: 
> On Tue, 02 Apr 2024 23:09:02 PDT (-0700), hal.feng at starfivetech.com wrote:
> > Add support for StarFive JH7110 SoC and VisionFive 2 board.
> > - Clock & reset
> > - Cache
> > - Temperature sensor
> > - PMIC (AXP15060)
> > - Restart GPIO
> > - RNG
> > - I2C
> > - SPI
> > - Quad SPI
> > - USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
> > - Audio (I2S / TDM / PWM-DAC)
> > - Camera Subsystem & MIPI-CSI2 RX & D-PHY RX
> >
> > Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> > ---
> >
> > Hi,
> >
> > As more drivers of StarFive JH7110 VisionFive 2 board are upstream,
> > add support for them in riscv defconfig.
> >
> > Best regards,
> > Hal
> >
> > ---
> >  arch/riscv/configs/defconfig | 32 ++++++++++++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/arch/riscv/configs/defconfig
> > b/arch/riscv/configs/defconfig index fc0ec2ee13bc..a4eb66b30d95 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -111,6 +111,7 @@ CONFIG_PCIE_XILINX=y  CONFIG_PCIE_FU740=y
> > CONFIG_DEVTMPFS=y  CONFIG_DEVTMPFS_MOUNT=y
> > +CONFIG_SIFIVE_CCACHE=y
> >  CONFIG_MTD=y
> >  CONFIG_MTD_BLOCK=y
> >  CONFIG_MTD_CFI=y
> > @@ -154,24 +155,36 @@ CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
> >  CONFIG_VIRTIO_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_HW_RANDOM_VIRTIO=y
> > +CONFIG_HW_RANDOM_JH7110=m
> > +CONFIG_I2C=y
> >  CONFIG_I2C_CHARDEV=m
> > +CONFIG_I2C_DESIGNWARE_PLATFORM=y
> >  CONFIG_I2C_MV64XXX=m
> >  CONFIG_I2C_RIIC=y
> >  CONFIG_SPI=y
> > +CONFIG_SPI_CADENCE_QUADSPI=m
> > +CONFIG_SPI_PL022=m
> >  CONFIG_SPI_RSPI=m
> >  CONFIG_SPI_SIFIVE=y
> >  CONFIG_SPI_SUN6I=y
> >  # CONFIG_PTP_1588_CLOCK is not set
> >  CONFIG_GPIO_SIFIVE=y
> > +CONFIG_POWER_RESET_GPIO_RESTART=y
> > +CONFIG_SENSORS_SFCTEMP=y
> >  CONFIG_CPU_THERMAL=y
> >  CONFIG_DEVFREQ_THERMAL=y
> >  CONFIG_RZG2L_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_SUNXI_WATCHDOG=y
> >  CONFIG_RENESAS_RZG2LWDT=y
> > +CONFIG_MFD_AXP20X_I2C=y
> >  CONFIG_REGULATOR=y
> >  CONFIG_REGULATOR_FIXED_VOLTAGE=y
> > +CONFIG_REGULATOR_AXP20X=y
> >  CONFIG_REGULATOR_GPIO=y
> > +CONFIG_MEDIA_SUPPORT=m
> > +CONFIG_V4L_PLATFORM_DRIVERS=y
> > +CONFIG_VIDEO_CADENCE_CSI2RX=m
> >  CONFIG_DRM=m
> >  CONFIG_DRM_RADEON=m
> >  CONFIG_DRM_NOUVEAU=m
> > @@ -183,6 +196,10 @@ CONFIG_SOUND=y
> >  CONFIG_SND=y
> >  CONFIG_SND_SOC=y
> >  CONFIG_SND_SOC_RZ=m
> > +CONFIG_SND_DESIGNWARE_I2S=m
> > +CONFIG_SND_SOC_STARFIVE=m
> > +CONFIG_SND_SOC_JH7110_PWMDAC=m
> > +CONFIG_SND_SOC_JH7110_TDM=m
> >  CONFIG_SND_SOC_WM8978=m
> >  CONFIG_SND_SIMPLE_CARD=m
> >  CONFIG_USB=y
> > @@ -196,6 +213,11 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
> > CONFIG_USB_RENESAS_USBHS=m  CONFIG_USB_STORAGE=y
> CONFIG_USB_UAS=y
> > +CONFIG_USB_CDNS_SUPPORT=m
> > +CONFIG_USB_CDNS3=m
> > +CONFIG_USB_CDNS3_GADGET=y
> > +CONFIG_USB_CDNS3_HOST=y
> > +CONFIG_USB_CDNS3_STARFIVE=m
> >  CONFIG_USB_MUSB_HDRC=m
> >  CONFIG_USB_MUSB_SUNXI=m
> >  CONFIG_NOP_USB_XCEIV=m
> > @@ -233,6 +255,13 @@ CONFIG_VIRTIO_BALLOON=y
> CONFIG_VIRTIO_INPUT=y
> > CONFIG_VIRTIO_MMIO=y  CONFIG_RENESAS_OSTM=y
> > +CONFIG_STAGING=y
> > +CONFIG_STAGING_MEDIA=y
> g
> I don't think we want staging on in defconfig.
> 
> > +CONFIG_VIDEO_STARFIVE_CAMSS=m
> 
> Is it just for this?  I think we can just exclude that from defconfig until it gets out
> of staging, we should be able to boot without it.
> According to the TODO userspace isn't there yet, so I think it should be pretty
> safe.

Yeah, CONFIG_STAGING is just for CONFIG_VIDEO_STARFIVE_CAMSS.
I will drop the above three configs in the next version.

Best regards,
Hal

> 
> > +CONFIG_CLK_STARFIVE_JH7110_AON=y
> > +CONFIG_CLK_STARFIVE_JH7110_STG=y
> > +CONFIG_CLK_STARFIVE_JH7110_ISP=y
> > +CONFIG_CLK_STARFIVE_JH7110_VOUT=y
> >  CONFIG_SUN8I_DE2_CCU=m
> >  CONFIG_SUN50I_IOMMU=y
> >  CONFIG_RPMSG_CHAR=y
> > @@ -244,6 +273,9 @@ CONFIG_RZG2L_ADC=m
> > CONFIG_RESET_RZG2L_USBPHY_CTRL=y  CONFIG_PHY_SUN4I_USB=m
> > CONFIG_PHY_RCAR_GEN3_USB2=y
> > +CONFIG_PHY_STARFIVE_JH7110_DPHY_RX=m
> > +CONFIG_PHY_STARFIVE_JH7110_PCIE=m
> > +CONFIG_PHY_STARFIVE_JH7110_USB=m
> >  CONFIG_LIBNVDIMM=y
> >  CONFIG_NVMEM_SUNXI_SID=y
> >  CONFIG_EXT4_FS=y
> >
> > base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f


More information about the linux-riscv mailing list