[GIT PULL] RISC-V Devicetrees for v6.10
Conor Dooley
conor at kernel.org
Fri May 3 08:24:24 PDT 2024
Hey Arnd,
Please pull some dt updates for v6.10. The diff here is a little bigger
than my tag implies, but I've done this on top of -fixes and wanted to
make this obvious. I've also not really mentioned all the Kconfig stuff
much as you'll get that in another branch.
Cheers,
Conor.
The following changes since commit 4cece764965020c22cff7665b18a012006359095:
Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ tags/riscv-dt-for-v6.10
for you to fetch changes up to 8fd63d81a76024fbd8e3fca29a0748bc9ca46161:
riscv: dts: microchip: add pac1934 power-monitor to icicle (2024-05-02 17:24:09 +0100)
----------------------------------------------------------------
RISC-V Devicetrees for v6.10
Canaan:
Basic support for the k230 from Canaan and two boards based on it.
The k230 is the first SoC we're adding support for that implements the
ratified Vector extension, granted mainline doesn't yet support the
non-ratified extension for the SoCs that have it. Only the "Big" core is
supported right now and in a very basic configuration. The SoC is also
the first we have that support the Zicbom and Zicboz cache
management/zeroing extensions. Despite having T-Head CPU cores, the
non-spec compliant page table bit "erratum" isn't currently used here
either, as the SoC supports the standard Svpbmt extension. Using Svpbmt
requires non-factory m-mode firmware to clear the relevant bit in
CSR.MXSTATUS, but non-factory firmware is required for running mainline
on most (all?) SoCs using a T-Head CPU to date due to other issues.
Commit 5db2c4dc413e ("riscv: dts: add initial canmv-k230 and k230-evb
dts") contains more information on the supported extensions.
Support for the k230 required some re-jiggling of Kconfig options that
previously operated under the assumption that a Canaan SoC meant a
kernel running in m-mode with the MMU disabled.
Microchip:
A simple addition of a power-monitor on the Icicle dev board, as the
binding for it is now in mainline.
StarFive:
Support for the Milk-V Mars. This board is incredibly similar to the
VisionFive v2 that is already supported, with only the really ethernet
configuration being slightly different. Emil requested that a common
dtsi file, so my fixes branch is pulled into for-next to avoid an
annoying conflict between moved content and some erroneously added
nodes that were removed as fixes this cycle.
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
----------------------------------------------------------------
Conor Dooley (3):
RISC-V: Drop unused SOC_CANAAN
RISC-V: add Milkv Mars board devicetree
riscv: dts: microchip: add pac1934 power-monitor to icicle
Hannah Peuckmann (2):
riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware
riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardware
Jisheng Zhang (8):
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: visionfive 2: update sound and codec dt node name
riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
riscv: dts: starfive: visionfive 2: add tf cd-gpios
riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard
riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards
riscv: dts: starfive: add Milkv Mars board device tree
Shengyu Qu (1):
riscv: dts: starfive: Remove PMIC interrupt info for Visionfive 2 board
Thomas Bonnefille (1):
riscv: dts: thead: Fix node ordering in TH1520 device tree
Yangyu Chen (10):
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
dt-bindings: riscv: Add T-HEAD C908 compatible
dt-bindings: add Canaan K230 boards compatible strings
dt-bindings: timer: Add Canaan K230 CLINT
dt-bindings: interrupt-controller: Add Canaan K230 PLIC
riscv: dts: add initial canmv-k230 and k230-evb dts
.../interrupt-controller/sifive,plic-1.0.0.yaml | 1 +
.../devicetree/bindings/riscv/canaan.yaml | 8 +-
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
.../devicetree/bindings/riscv/starfive.yaml | 1 +
.../devicetree/bindings/timer/sifive,clint.yaml | 1 +
arch/riscv/Kconfig.socs | 8 +-
arch/riscv/Makefile | 2 +-
arch/riscv/boot/dts/canaan/Makefile | 2 +
arch/riscv/boot/dts/canaan/k230-canmv.dts | 24 +
arch/riscv/boot/dts/canaan/k230-evb.dts | 24 +
arch/riscv/boot/dts/canaan/k230.dtsi | 142 +++++
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 32 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 599 ++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts | 30 +
.../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 683 +--------------------
arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +-
arch/riscv/boot/dts/thead/th1520.dtsi | 54 +-
arch/riscv/configs/nommu_k210_defconfig | 3 +-
arch/riscv/configs/nommu_k210_sdcard_defconfig | 3 +-
drivers/clk/Kconfig | 4 +-
drivers/pinctrl/Kconfig | 4 +-
drivers/reset/Kconfig | 4 +-
drivers/soc/Makefile | 2 +-
drivers/soc/canaan/Kconfig | 4 +-
26 files changed, 914 insertions(+), 727 deletions(-)
create mode 100644 arch/riscv/boot/dts/canaan/k230-canmv.dts
create mode 100644 arch/riscv/boot/dts/canaan/k230-evb.dts
create mode 100644 arch/riscv/boot/dts/canaan/k230.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-common.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240503/d81e8bb4/attachment.sig>
More information about the linux-riscv
mailing list