[PATCH v1 1/3] riscv: make image compression configurable

[Björn Töpel]

Emil Renner Berthing <emil.renner.berthing at canonical.com> writes:

> Previously the build process would always set KBUILD_IMAGE to the
> uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
> unconditionally compress it into Image.gz. However there are already
> build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
> Image.zstd, so let's make use of those, make the compression method
> configurable and set KBUILD_IMAGE accordingly so that targets like
> 'make install' and 'make bindeb-pkg' will use the chosen image.
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> ---
>  arch/riscv/Kconfig         |  7 +++++++
>  arch/riscv/Makefile        | 43 ++++++++++++++++++++------------------
>  arch/riscv/boot/install.sh |  9 +++++---
>  3 files changed, 36 insertions(+), 23 deletions(-)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index be09c8836d56..6c092d1ea7db 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -138,6 +138,13 @@ config RISCV
>  	select HAVE_GCC_PLUGINS
>  	select HAVE_GENERIC_VDSO if MMU && 64BIT
>  	select HAVE_IRQ_TIME_ACCOUNTING
> +	select HAVE_KERNEL_BZIP2 if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_GZIP if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_LZ4 if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_LZMA if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_LZO if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_UNCOMPRESSED if !XIP_KERNEL && !EFI_ZBOOT
> +	select HAVE_KERNEL_ZSTD if !XIP_KERNEL && !EFI_ZBOOT
>  	select HAVE_KPROBES if !XIP_KERNEL
>  	select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
>  	select HAVE_KRETPROBES if !XIP_KERNEL
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 5b3115a19852..29be676415d6 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -129,11 +129,27 @@ endif
>  CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>  
>  # Default target when executing plain make
> -boot		:= arch/riscv/boot
> +boot := arch/riscv/boot
>  ifeq ($(CONFIG_XIP_KERNEL),y)
>  KBUILD_IMAGE := $(boot)/xipImage
> +else ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy)
> +KBUILD_IMAGE := $(boot)/loader.bin
> +else ifeq ($(CONFIG_EFI_ZBOOT),y)
> +KBUILD_IMAGE := $(boot)/vmlinuz.efi
> +else ifeq ($(CONFIG_KERNEL_GZIP),y)
> +KBUILD_IMAGE := $(boot)/Image.gz
> +else ifeq ($(CONFIG_KERNEL_BZIP2),y)
> +KBUILD_IMAGE := $(boot)/Image.bz2
> +else ifeq ($(CONFIG_KERNEL_LZ4),y)
> +KBUILD_IMAGE := $(boot)/Image.lz4
> +else ifeq ($(CONFIG_KERNEL_LZMA),y)
> +KBUILD_IMAGE := $(boot)/Image.lzma
> +else ifeq ($(CONFIG_KERNEL_LZO),y)
> +KBUILD_IMAGE := $(boot)/Image.lzo
> +else ifeq ($(CONFIG_KERNEL_ZSTD),y)
> +KBUILD_IMAGE := $(boot)/Image.zst
>  else
> -KBUILD_IMAGE	:= $(boot)/Image.gz
> +KBUILD_IMAGE := $(boot)/Image
>  endif

Really a nit/change if you want, but maybe doing something like
arch/s390/boot/Makefile does is easier to read:

diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 024482c68835..70f08e9999b4 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -128,6 +128,14 @@ endif
 # arch specific predefines for sparse
 CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
 
+suffix-$(CONFIG_KERNEL_GZIP)  := .gz
+suffix-$(CONFIG_KERNEL_BZIP2) := .bz2
+suffix-$(CONFIG_KERNEL_LZ4)  := .lz4
+suffix-$(CONFIG_KERNEL_LZMA)  := .lzma
+suffix-$(CONFIG_KERNEL_LZO)  := .lzo
+suffix-$(CONFIG_KERNEL_XZ)  := .xz
+suffix-$(CONFIG_KERNEL_ZSTD)  := .zst
+
 # Default target when executing plain make
 boot := arch/riscv/boot
 ifeq ($(CONFIG_XIP_KERNEL),y)
@@ -136,20 +144,8 @@ else ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy)
 KBUILD_IMAGE := $(boot)/loader.bin
 else ifeq ($(CONFIG_EFI_ZBOOT),y)
 KBUILD_IMAGE := $(boot)/vmlinuz.efi
-else ifeq ($(CONFIG_KERNEL_GZIP),y)
-KBUILD_IMAGE := $(boot)/Image.gz
-else ifeq ($(CONFIG_KERNEL_BZIP2),y)
-KBUILD_IMAGE := $(boot)/Image.bz2
-else ifeq ($(CONFIG_KERNEL_LZ4),y)
-KBUILD_IMAGE := $(boot)/Image.lz4
-else ifeq ($(CONFIG_KERNEL_LZMA),y)
-KBUILD_IMAGE := $(boot)/Image.lzma
-else ifeq ($(CONFIG_KERNEL_LZO),y)
-KBUILD_IMAGE := $(boot)/Image.lzo
-else ifeq ($(CONFIG_KERNEL_ZSTD),y)
-KBUILD_IMAGE := $(boot)/Image.zst
 else
-KBUILD_IMAGE := $(boot)/Image
+KBUILD_IMAGE := $(boot)/Image$(suffix-y)
 endif



Björn