[PATCH bpf-next 2/5] riscv, bpf: Relax restrictions on Zbb instructions

[Samuel Holland]

Hi Conor,

Looks good except for one typo.

On 2024-03-29 6:23 AM, Conor Dooley wrote:
> On Thu, Mar 28, 2024 at 10:07:23PM +0000, Conor Dooley wrote:
> 
>> As I said on IRC to you earlier, I think the Kconfig options here are in
>> need of a bit of a spring cleaning - they should be modified to explain
>> their individual purposes, be that enabling optimisations in the kernel
>> or being required for userspace. I'll try to send a patch for that if
>> I remember tomorrow.
> 
> Something like this:
> 
> -- >8 --
> commit 5125504beaedd669b082bf74b02003a77360670f
> Author: Conor Dooley <conor.dooley at microchip.com>
> Date:   Fri Mar 29 11:13:22 2024 +0000
> 
>     RISC-V: clarify what some RISCV_ISA* config options do
>     
>     During some discussion on IRC yesterday and on Pu's bpf patch [1]
>     I noticed that these RISCV_ISA* Kconfig options are not really clear
>     about their implications. Many of these options have no impact on what
>     userspace is allowed to do, for example an application can use Zbb
>     regardless of whether or not the kernel does. Change the help text to
>     try and clarify whether or not an option affects just the kernel, or
>     also userspace. None of these options actually control whether or not an
>     extension is detected dynamically as that's done regardless of Kconfig
>     options, so drop any text that implies the option is required for
>     dynamic detection, rewording them as "do x when y is detected".
>     
>     Link: https://lore.kernel.org/linux-riscv/20240328-ferocity-repose-c554f75a676c@spud/ [1]
>     Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
>     ---
>     I did this based on top of Samuel's changes dropping the MMU
>     requurements just in case, but I don't think there's a conflict:
>     https://lore.kernel.org/linux-riscv/20240227003630.3634533-4-samuel.holland@sifive.com/
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index d8a777f59402..f327a8ac648f 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -501,8 +501,8 @@ config RISCV_ISA_SVNAPOT
>  	depends on RISCV_ALTERNATIVE
>  	default y
>  	help
> -	  Allow kernel to detect the Svnapot ISA-extension dynamically at boot
> -	  time and enable its usage.
> +	  Add support for the Svnapot ISA-extension when it is detected by
> +	  the kernel at boot.
>  
>  	  The Svnapot extension is used to mark contiguous PTEs as a range
>  	  of contiguous virtual-to-physical translations for a naturally
> @@ -520,9 +520,9 @@ config RISCV_ISA_SVPBMT
>  	depends on RISCV_ALTERNATIVE
>  	default y
>  	help
> -	   Adds support to dynamically detect the presence of the Svpbmt
> -	   ISA-extension (Supervisor-mode: page-based memory types) and
> -	   enable its usage.
> +	   Add support for the Svpbmt ISA-extension (Supervisor-mode:
> +	   page-based memory types) when it is detected by the kernel at
> +	   boot.
>  
>  	   The memory type for a page contains a combination of attributes
>  	   that indicate the cacheability, idempotency, and ordering
> @@ -541,14 +541,15 @@ config TOOLCHAIN_HAS_V
>  	depends on AS_HAS_OPTION_ARCH
>  
>  config RISCV_ISA_V
> -	bool "VECTOR extension support"
> +	bool "Vector extension support"
>  	depends on TOOLCHAIN_HAS_V
>  	depends on FPU
>  	select DYNAMIC_SIGFRAME
>  	default y
>  	help
>  	  Say N here if you want to disable all vector related procedure
> -	  in the kernel.
> +	  in the kernel. Without this option enabled, neither the kernel nor
> +	  userspace may use vector.
>  
>  	  If you don't know what to do here, say Y.
>  
> @@ -606,8 +607,8 @@ config RISCV_ISA_ZBB
>  	depends on RISCV_ALTERNATIVE
>  	default y
>  	help
> -	   Adds support to dynamically detect the presence of the ZBB
> -	   extension (basic bit manipulation) and enable its usage.
> +	   Add support for enabling optimisations in the kernel when the
> +	   Zbb extension is detected at boot.
>  
>  	   The Zbb extension provides instructions to accelerate a number
>  	   of bit-specific operations (count bit population, sign extending,
> @@ -623,9 +624,9 @@ config RISCV_ISA_ZICBOM
>  	select RISCV_DMA_NONCOHERENT
>  	select DMA_DIRECT_REMAP
>  	help
> -	   Adds support to dynamically detect the presence of the ZICBOM
> -	   extension (Cache Block Management Operations) and enable its
> -	   usage.
> +	   Add support for the Zicbom extension (Cache Block Management
> +	   Operations) and enable its use in the kernel when it is detected
> +	   at boot.
>  
>  	   The Zicbom extension can be used to handle for example
>  	   non-coherent DMA support on devices that need it.
> @@ -684,7 +685,8 @@ config FPU
>  	default y
>  	help
>  	  Say N here if you want to disable all floating-point related procedure
> -	  in the kernel.
> +	  in the kernel. Without this option enabled, neither the kernel nor
> +	  userspace may use vector.

s/vector/floating point/ here.

Regards,
Samuel

>  
>  	  If you don't know what to do here, say Y.
>  
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv