[PATCH 7/9] s390: Convert from tasklet to BH workqueue
Allen Pais
apais at linux.microsoft.com
Wed Mar 27 09:03:12 PDT 2024
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/infiniband/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj at kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Note: Not tested. Please test/review.
Signed-off-by: Allen Pais <allen.lkml at gmail.com>
---
drivers/s390/block/dasd.c | 42 ++++++++++++------------
drivers/s390/block/dasd_int.h | 10 +++---
drivers/s390/char/con3270.c | 27 ++++++++--------
drivers/s390/crypto/ap_bus.c | 24 +++++++-------
drivers/s390/crypto/ap_bus.h | 2 +-
drivers/s390/crypto/zcrypt_msgtype50.c | 2 +-
drivers/s390/crypto/zcrypt_msgtype6.c | 4 +--
drivers/s390/net/ctcm_fsms.c | 4 +--
drivers/s390/net/ctcm_main.c | 15 ++++-----
drivers/s390/net/ctcm_main.h | 5 +--
drivers/s390/net/ctcm_mpc.c | 12 +++----
drivers/s390/net/ctcm_mpc.h | 7 ++--
drivers/s390/net/lcs.c | 26 +++++++--------
drivers/s390/net/lcs.h | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/s390/scsi/zfcp_qdio.c | 45 +++++++++++++-------------
drivers/s390/scsi/zfcp_qdio.h | 9 +++---
17 files changed, 117 insertions(+), 121 deletions(-)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0a97cfedd706..c6f9910f0a98 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -54,8 +54,8 @@ MODULE_LICENSE("GPL");
* SECTION: prototypes for static functions of dasd.c
*/
static int dasd_flush_block_queue(struct dasd_block *);
-static void dasd_device_tasklet(unsigned long);
-static void dasd_block_tasklet(unsigned long);
+static void dasd_device_work(struct work_struct *);
+static void dasd_block_work(struct work_struct *);
static void do_kick_device(struct work_struct *);
static void do_reload_device(struct work_struct *);
static void do_requeue_requests(struct work_struct *);
@@ -114,9 +114,8 @@ struct dasd_device *dasd_alloc_device(void)
dasd_init_chunklist(&device->erp_chunks, device->erp_mem, PAGE_SIZE);
dasd_init_chunklist(&device->ese_chunks, device->ese_mem, PAGE_SIZE * 2);
spin_lock_init(&device->mem_lock);
- atomic_set(&device->tasklet_scheduled, 0);
- tasklet_init(&device->tasklet, dasd_device_tasklet,
- (unsigned long) device);
+ atomic_set(&device->work_scheduled, 0);
+ INIT_WORK(&device->bh, dasd_device_work);
INIT_LIST_HEAD(&device->ccw_queue);
timer_setup(&device->timer, dasd_device_timeout, 0);
INIT_WORK(&device->kick_work, do_kick_device);
@@ -154,9 +153,8 @@ struct dasd_block *dasd_alloc_block(void)
/* open_count = 0 means device online but not in use */
atomic_set(&block->open_count, -1);
- atomic_set(&block->tasklet_scheduled, 0);
- tasklet_init(&block->tasklet, dasd_block_tasklet,
- (unsigned long) block);
+ atomic_set(&block->work_scheduled, 0);
+ INIT_WORK(&block->bh, dasd_block_work);
INIT_LIST_HEAD(&block->ccw_queue);
spin_lock_init(&block->queue_lock);
INIT_LIST_HEAD(&block->format_list);
@@ -2148,12 +2146,12 @@ EXPORT_SYMBOL_GPL(dasd_flush_device_queue);
/*
* Acquire the device lock and process queues for the device.
*/
-static void dasd_device_tasklet(unsigned long data)
+static void dasd_device_work(struct work_struct *t)
{
- struct dasd_device *device = (struct dasd_device *) data;
+ struct dasd_device *device = from_work(device, t, bh);
struct list_head final_queue;
- atomic_set (&device->tasklet_scheduled, 0);
+ atomic_set (&device->work_scheduled, 0);
INIT_LIST_HEAD(&final_queue);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Check expire time of first request on the ccw queue. */
@@ -2174,15 +2172,15 @@ static void dasd_device_tasklet(unsigned long data)
}
/*
- * Schedules a call to dasd_tasklet over the device tasklet.
+ * Schedules a call to dasd_work over the device wq.
*/
void dasd_schedule_device_bh(struct dasd_device *device)
{
/* Protect against rescheduling. */
- if (atomic_cmpxchg (&device->tasklet_scheduled, 0, 1) != 0)
+ if (atomic_cmpxchg (&device->work_scheduled, 0, 1) != 0)
return;
dasd_get_device(device);
- tasklet_hi_schedule(&device->tasklet);
+ queue_work(system_bh_highpri_wq, &device->bh);
}
EXPORT_SYMBOL(dasd_schedule_device_bh);
@@ -2595,7 +2593,7 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
else
rc = -EIO;
- /* kick tasklets */
+ /* kick works */
dasd_schedule_device_bh(device);
if (device->block)
dasd_schedule_block_bh(device->block);
@@ -2891,15 +2889,15 @@ static void __dasd_block_start_head(struct dasd_block *block)
* block layer request queue, creates ccw requests, enqueues them on
* a dasd_device and processes ccw requests that have been returned.
*/
-static void dasd_block_tasklet(unsigned long data)
+static void dasd_block_work(struct work_struct *t)
{
- struct dasd_block *block = (struct dasd_block *) data;
+ struct dasd_block *block = from_work(block, t, bh);
struct list_head final_queue;
struct list_head *l, *n;
struct dasd_ccw_req *cqr;
struct dasd_queue *dq;
- atomic_set(&block->tasklet_scheduled, 0);
+ atomic_set(&block->work_scheduled, 0);
INIT_LIST_HEAD(&final_queue);
spin_lock_irq(&block->queue_lock);
/* Finish off requests on ccw queue */
@@ -2970,7 +2968,7 @@ static int _dasd_requests_to_flushqueue(struct dasd_block *block,
if (rc < 0)
break;
/* Rechain request (including erp chain) so it won't be
- * touched by the dasd_block_tasklet anymore.
+ * touched by the dasd_block_work anymore.
* Replace the callback so we notice when the request
* is returned from the dasd_device layer.
*/
@@ -3025,16 +3023,16 @@ static int dasd_flush_block_queue(struct dasd_block *block)
}
/*
- * Schedules a call to dasd_tasklet over the device tasklet.
+ * Schedules a call to dasd_work over the device wq.
*/
void dasd_schedule_block_bh(struct dasd_block *block)
{
/* Protect against rescheduling. */
- if (atomic_cmpxchg(&block->tasklet_scheduled, 0, 1) != 0)
+ if (atomic_cmpxchg(&block->work_scheduled, 0, 1) != 0)
return;
/* life cycle of block is bound to it's base device */
dasd_get_device(block->base);
- tasklet_hi_schedule(&block->tasklet);
+ queue_work(system_bh_highpri_wq, &block->bh);
}
EXPORT_SYMBOL(dasd_schedule_block_bh);
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index e5f40536b425..abe4d43f474e 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -28,7 +28,7 @@
* known -> basic: request irq line for the device.
* basic -> ready: do the initial analysis, e.g. format detection,
* do block device setup and detect partitions.
- * ready -> online: schedule the device tasklet.
+ * ready -> online: schedule the device work.
* Things to do for shutdown state transitions:
* online -> ready: just set the new device state.
* ready -> basic: flush requests from the block device layer, clear
@@ -579,8 +579,8 @@ struct dasd_device {
struct list_head erp_chunks;
struct list_head ese_chunks;
- atomic_t tasklet_scheduled;
- struct tasklet_struct tasklet;
+ atomic_t work_scheduled;
+ struct work_struct bh;
struct work_struct kick_work;
struct work_struct reload_device;
struct work_struct kick_validate;
@@ -630,8 +630,8 @@ struct dasd_block {
struct list_head ccw_queue;
spinlock_t queue_lock;
- atomic_t tasklet_scheduled;
- struct tasklet_struct tasklet;
+ atomic_t work_scheduled;
+ struct work_struct bh;
struct timer_list timer;
struct dentry *debugfs_dentry;
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index 251d2a1c3eef..993275e9b2f4 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -28,6 +28,7 @@
#include <asm/ebcdic.h>
#include <asm/cpcmd.h>
#include <linux/uaccess.h>
+#include <linux/workqueue.h>
#include "raw3270.h"
#include "keyboard.h"
@@ -107,8 +108,8 @@ struct tty3270 {
struct raw3270_request *readpartreq;
unsigned char inattr; /* Visible/invisible input. */
int throttle, attn; /* tty throttle/unthrottle. */
- struct tasklet_struct readlet; /* Tasklet to issue read request. */
- struct tasklet_struct hanglet; /* Tasklet to hang up the tty. */
+ struct work_struct read_work; /* Work to issue read request. */
+ struct work_struct hang_work; /* Work to hang up the tty. */
struct kbd_data *kbd; /* key_maps stuff. */
/* Escape sequence parsing. */
@@ -667,9 +668,9 @@ static void tty3270_scroll_backward(struct kbd_data *kbd)
/*
* Pass input line to tty.
*/
-static void tty3270_read_tasklet(unsigned long data)
+static void tty3270_read_work(struct work_struct *T)
{
- struct raw3270_request *rrq = (struct raw3270_request *)data;
+ struct raw3270_request *rrq = from_work(rrq, t, read_work);
static char kreset_data = TW_KR;
struct tty3270 *tp = container_of(rrq->view, struct tty3270, view);
char *input;
@@ -734,8 +735,8 @@ static void tty3270_read_callback(struct raw3270_request *rq, void *data)
struct tty3270 *tp = container_of(rq->view, struct tty3270, view);
raw3270_get_view(rq->view);
- /* Schedule tasklet to pass input to tty. */
- tasklet_schedule(&tp->readlet);
+ /* Schedule work to pass input to tty. */
+ queue_work(system_bh_wq, &tp->read_work);
}
/*
@@ -768,9 +769,9 @@ static void tty3270_issue_read(struct tty3270 *tp, int lock)
/*
* Hang up the tty
*/
-static void tty3270_hangup_tasklet(unsigned long data)
+static void tty3270_hangup_work(struct work_struct *t)
{
- struct tty3270 *tp = (struct tty3270 *)data;
+ struct tty3270 *tp = from_work(tp, t, hang_work);
tty_port_tty_hangup(&tp->port, true);
raw3270_put_view(&tp->view);
@@ -797,7 +798,7 @@ static void tty3270_deactivate(struct raw3270_view *view)
static void tty3270_irq(struct tty3270 *tp, struct raw3270_request *rq, struct irb *irb)
{
- /* Handle ATTN. Schedule tasklet to read aid. */
+ /* Handle ATTN. Schedule work to read aid. */
if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) {
if (!tp->throttle)
tty3270_issue_read(tp, 0);
@@ -809,7 +810,7 @@ static void tty3270_irq(struct tty3270 *tp, struct raw3270_request *rq, struct i
if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
rq->rc = -EIO;
raw3270_get_view(&tp->view);
- tasklet_schedule(&tp->hanglet);
+ queue_work(system_bh_wq, &tp->hang_work);
} else {
/* Normal end. Copy residual count. */
rq->rescnt = irb->scsw.cmd.count;
@@ -850,10 +851,8 @@ static struct tty3270 *tty3270_alloc_view(void)
tty_port_init(&tp->port);
timer_setup(&tp->timer, tty3270_update, 0);
- tasklet_init(&tp->readlet, tty3270_read_tasklet,
- (unsigned long)tp->read);
- tasklet_init(&tp->hanglet, tty3270_hangup_tasklet,
- (unsigned long)tp);
+ INIT_WORK(&tp->read_work, tty3270_read_work);
+ INIT_WORK(&tp->hang_work, tty3270_hangup_work);
return tp;
out_readpartreq:
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index cce0bafd4c92..5136ecd965ae 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -111,10 +111,10 @@ static void ap_scan_bus_wq_callback(struct work_struct *);
static DECLARE_WORK(ap_scan_bus_work, ap_scan_bus_wq_callback);
/*
- * Tasklet & timer for AP request polling and interrupts
+ * Work & timer for AP request polling and interrupts
*/
-static void ap_tasklet_fn(unsigned long);
-static DECLARE_TASKLET_OLD(ap_tasklet, ap_tasklet_fn);
+static void ap_work_fn(struct work_struct *);
+static DECLARE_WORK(ap_work, ap_work_fn);
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread;
static DEFINE_MUTEX(ap_poll_thread_mutex);
@@ -450,16 +450,16 @@ void ap_request_timeout(struct timer_list *t)
* ap_poll_timeout(): AP receive polling for finished AP requests.
* @unused: Unused pointer.
*
- * Schedules the AP tasklet using a high resolution timer.
+ * Schedules the AP work using a high resolution timer.
*/
static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
{
- tasklet_schedule(&ap_tasklet);
+ queue_work(system_bh_wq, &ap_work);
return HRTIMER_NORESTART;
}
/**
- * ap_interrupt_handler() - Schedule ap_tasklet on interrupt
+ * ap_interrupt_handler() - Schedule ap_work on interrupt
* @airq: pointer to adapter interrupt descriptor
* @tpi_info: ignored
*/
@@ -467,23 +467,23 @@ static void ap_interrupt_handler(struct airq_struct *airq,
struct tpi_info *tpi_info)
{
inc_irq_stat(IRQIO_APB);
- tasklet_schedule(&ap_tasklet);
+ queue_work(system_bh_wq, &ap_work);
}
/**
- * ap_tasklet_fn(): Tasklet to poll all AP devices.
- * @dummy: Unused variable
+ * ap_work_fn(): Work to poll all AP devices.
+ * @t: pointer to work_struct
*
* Poll all AP devices on the bus.
*/
-static void ap_tasklet_fn(unsigned long dummy)
+static void ap_work_fn(struct work_struct *t)
{
int bkt;
struct ap_queue *aq;
enum ap_sm_wait wait = AP_SM_WAIT_NONE;
/* Reset the indicator if interrupts are used. Thus new interrupts can
- * be received. Doing it in the beginning of the tasklet is therefore
+ * be received. Doing it in the beginning of the work is therefore
* important that no requests on any AP get lost.
*/
if (ap_irq_flag)
@@ -546,7 +546,7 @@ static int ap_poll_thread(void *data)
try_to_freeze();
continue;
}
- ap_tasklet_fn(0);
+ queue_work(system_bh_wq, &ap_work);
}
return 0;
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 59c7ed49aa02..7daea5c536c9 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -223,7 +223,7 @@ struct ap_message {
u16 flags; /* Flags, see AP_MSG_FLAG_xxx */
int rc; /* Return code for this message */
void *private; /* ap driver private pointer. */
- /* receive is called from tasklet context */
+ /* receive is called from work context */
void (*receive)(struct ap_queue *, struct ap_message *,
struct ap_message *);
};
diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c
index 3b39cb8f926d..c7bf389f2938 100644
--- a/drivers/s390/crypto/zcrypt_msgtype50.c
+++ b/drivers/s390/crypto/zcrypt_msgtype50.c
@@ -403,7 +403,7 @@ static int convert_response(struct zcrypt_queue *zq,
/*
* This function is called from the AP bus code after a crypto request
* "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
+ * It is called from work context.
* @aq: pointer to the AP device
* @msg: pointer to the AP message
* @reply: pointer to the AP reply message
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index 215f257d2360..b62e2c9cee58 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -847,7 +847,7 @@ static int convert_response_rng(struct zcrypt_queue *zq,
/*
* This function is called from the AP bus code after a crypto request
* "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
+ * It is called from work context.
* @aq: pointer to the AP queue
* @msg: pointer to the AP message
* @reply: pointer to the AP reply message
@@ -913,7 +913,7 @@ static void zcrypt_msgtype6_receive(struct ap_queue *aq,
/*
* This function is called from the AP bus code after a crypto request
* "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
+ * It is called from work context.
* @aq: pointer to the AP queue
* @msg: pointer to the AP message
* @reply: pointer to the AP reply message
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 9678c6a2cda7..3b02a41c4386 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -1420,12 +1420,12 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
case MPCG_STATE_READY:
skb_put_data(new_skb, skb->data, block_len);
skb_queue_tail(&ch->io_queue, new_skb);
- tasklet_schedule(&ch->ch_tasklet);
+ queue_work(system_bh_wq, &ch->ch_work);
break;
default:
skb_put_data(new_skb, skb->data, len);
skb_queue_tail(&ch->io_queue, new_skb);
- tasklet_hi_schedule(&ch->ch_tasklet);
+ queue_work(system_bh_highpri_wq, &ch->ch_work);
break;
}
}
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 878fe3ce53ad..c504db179982 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -223,8 +223,8 @@ static void channel_remove(struct channel *ch)
dev_kfree_skb_any(ch->trans_skb);
}
if (IS_MPC(ch)) {
- tasklet_kill(&ch->ch_tasklet);
- tasklet_kill(&ch->ch_disc_tasklet);
+ cancel_work_sync(&ch->ch_work);
+ cancel_work_sync(&ch->ch_disc_work);
kfree(ch->discontact_th);
}
kfree(ch->ccw);
@@ -1027,7 +1027,7 @@ static void ctcm_free_netdevice(struct net_device *dev)
kfree_fsm(grp->fsm);
dev_kfree_skb(grp->xid_skb);
dev_kfree_skb(grp->rcvd_xid_skb);
- tasklet_kill(&grp->mpc_tasklet2);
+ cancel_work_sync(&grp->mpc_work2);
kfree(grp);
priv->mpcg = NULL;
}
@@ -1118,8 +1118,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
free_netdev(dev);
return NULL;
}
- tasklet_init(&grp->mpc_tasklet2,
- mpc_group_ready, (unsigned long)dev);
+ INIT_WORK(&grp->mpc_work2, mpc_group_ready);
dev->mtu = MPC_BUFSIZE_DEFAULT -
TH_HEADER_LENGTH - PDU_HEADER_LENGTH;
@@ -1319,10 +1318,8 @@ static int add_channel(struct ccw_device *cdev, enum ctcm_channel_types type,
goto nomem_return;
ch->discontact_th->th_blk_flag = TH_DISCONTACT;
- tasklet_init(&ch->ch_disc_tasklet,
- mpc_action_send_discontact, (unsigned long)ch);
-
- tasklet_init(&ch->ch_tasklet, ctcmpc_bh, (unsigned long)ch);
+ INIT_WORK(&ch->ch_disc_work, mpc_action_send_discontact);
+ INIT_WORK(&ch->ch_work, ctcmpc_bh);
ch->max_bufsize = (MPC_BUFSIZE_DEFAULT - 35);
ccw_num = 17;
} else
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index 25164e8bf13d..1143c037a7f7 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -13,6 +13,7 @@
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/workqueue.h>
#include "fsm.h"
#include "ctcm_dbug.h"
@@ -154,7 +155,7 @@ struct channel {
int max_bufsize;
struct sk_buff *trans_skb; /* transmit/receive buffer */
struct sk_buff_head io_queue; /* universal I/O queue */
- struct tasklet_struct ch_tasklet; /* MPC ONLY */
+ struct work_struct ch_work; /* MPC ONLY */
/*
* TX queue for collecting skb's during busy.
*/
@@ -188,7 +189,7 @@ struct channel {
fsm_timer sweep_timer;
struct sk_buff_head sweep_queue;
struct th_header *discontact_th;
- struct tasklet_struct ch_disc_tasklet;
+ struct work_struct ch_disc_work;
/* MPC ONLY section end */
int retry; /* retry counter for misc. operations */
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 9e580ef69bda..0b7ed15ce29d 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -588,7 +588,7 @@ void ctc_mpc_flow_control(int port_num, int flowc)
fsm_newstate(grp->fsm, MPCG_STATE_READY);
/* ensure any data that has accumulated */
/* on the io_queue will now be sen t */
- tasklet_schedule(&rch->ch_tasklet);
+ queue_work(system_bh_wq, &rch->ch_work);
}
/* possible race condition */
if (mpcg_state == MPCG_STATE_READY) {
@@ -847,7 +847,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
grp->out_of_sequence = 0;
grp->estconn_called = 0;
- tasklet_hi_schedule(&grp->mpc_tasklet2);
+ queue_work(system_bh_highpri_wq, &grp->mpc_work2);
return;
}
@@ -1213,16 +1213,16 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
}
/*
- * tasklet helper for mpc's skb unpacking.
+ * work helper for mpc's skb unpacking.
*
* ch The channel to work on.
* Allow flow control back pressure to occur here.
* Throttling back channel can result in excessive
* channel inactivity and system deact of channel
*/
-void ctcmpc_bh(unsigned long thischan)
+void ctcmpc_bh(struct work_struct *t)
{
- struct channel *ch = (struct channel *)thischan;
+ struct channel *ch = from_work(ch, t, ch_work);
struct sk_buff *skb;
struct net_device *dev = ch->netdev;
struct ctcm_priv *priv = dev->ml_priv;
@@ -1380,7 +1380,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
case MPCG_STATE_FLOWC:
case MPCG_STATE_READY:
default:
- tasklet_hi_schedule(&wch->ch_disc_tasklet);
+ queue_work(system_bh_wq, &wch->ch_disc_work);
}
grp->xid2_tgnum = 0;
diff --git a/drivers/s390/net/ctcm_mpc.h b/drivers/s390/net/ctcm_mpc.h
index da41b26f76d1..735bea5d565a 100644
--- a/drivers/s390/net/ctcm_mpc.h
+++ b/drivers/s390/net/ctcm_mpc.h
@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/skbuff.h>
+#include <linux/workqueue.h>
#include "fsm.h"
/*
@@ -156,8 +157,8 @@ struct mpcg_info {
};
struct mpc_group {
- struct tasklet_struct mpc_tasklet;
- struct tasklet_struct mpc_tasklet2;
+ struct work_struct mpc_work;
+ struct work_struct mpc_work2;
int changed_side;
int saved_state;
int channels_terminating;
@@ -233,6 +234,6 @@ void mpc_group_ready(unsigned long adev);
void mpc_channel_action(struct channel *ch, int direction, int action);
void mpc_action_send_discontact(unsigned long thischan);
void mpc_action_discontact(fsm_instance *fi, int event, void *arg);
-void ctcmpc_bh(unsigned long thischan);
+void ctcmpc_bh(struct work_struct *t);
#endif
/* --- This is the END my friend --- */
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 25d4e6376591..751b7b212c91 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -49,7 +49,7 @@ static struct device *lcs_root_dev;
/*
* Some prototypes.
*/
-static void lcs_tasklet(unsigned long);
+static void lcs_work(struct work_struct *);
static void lcs_start_kernel_thread(struct work_struct *);
static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
#ifdef CONFIG_IP_MULTICAST
@@ -140,8 +140,8 @@ static void
lcs_cleanup_channel(struct lcs_channel *channel)
{
LCS_DBF_TEXT(3, setup, "cleanch");
- /* Kill write channel tasklets. */
- tasklet_kill(&channel->irq_tasklet);
+ /* Kill write channel works. */
+ cancel_work_sync(&channel->irq_work);
/* Free channel buffers. */
lcs_free_channel(channel);
}
@@ -244,9 +244,8 @@ lcs_setup_read(struct lcs_card *card)
LCS_DBF_TEXT(3, setup, "initread");
lcs_setup_read_ccws(card);
- /* Initialize read channel tasklet. */
- card->read.irq_tasklet.data = (unsigned long) &card->read;
- card->read.irq_tasklet.func = lcs_tasklet;
+ /* Initialize read channel work. */
+ INIT_WORK(card->read.irq_work, lcs_work);
/* Initialize waitqueue. */
init_waitqueue_head(&card->read.wait_q);
}
@@ -290,9 +289,8 @@ lcs_setup_write(struct lcs_card *card)
LCS_DBF_TEXT(3, setup, "initwrit");
lcs_setup_write_ccws(card);
- /* Initialize write channel tasklet. */
- card->write.irq_tasklet.data = (unsigned long) &card->write;
- card->write.irq_tasklet.func = lcs_tasklet;
+ /* Initialize write channel work. */
+ INIT_WORK(card->write.irq_work, lcs_work);
/* Initialize waitqueue. */
init_waitqueue_head(&card->write.wait_q);
}
@@ -1429,22 +1427,22 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
}
if (irb->scsw.cmd.fctl & SCSW_FCTL_CLEAR_FUNC)
channel->state = LCS_CH_STATE_CLEARED;
- /* Do the rest in the tasklet. */
- tasklet_schedule(&channel->irq_tasklet);
+ /* Do the rest in the work. */
+ queue_work(system_bh_wq, &channel->irq_work);
}
/*
- * Tasklet for IRQ handler
+ * Work for IRQ handler
*/
static void
-lcs_tasklet(unsigned long data)
+lcs_work(struct work_struct *t)
{
unsigned long flags;
struct lcs_channel *channel;
struct lcs_buffer *iob;
int buf_idx;
- channel = (struct lcs_channel *) data;
+ channel = from_work(channel, t, irq_work);
LCS_DBF_TEXT_(5, trace, "tlet%s", dev_name(&channel->ccwdev->dev));
/* Check for processed buffers. */
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index a2699b70b050..66bc02e1d7e5 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -290,7 +290,7 @@ struct lcs_channel {
struct ccw_device *ccwdev;
struct ccw1 ccws[LCS_NUM_BUFFS + 1];
wait_queue_head_t wait_q;
- struct tasklet_struct irq_tasklet;
+ struct work_struct irq_work;
struct lcs_buffer iob[LCS_NUM_BUFFS];
int io_idx;
int buf_idx;
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index a0cce6872075..10ea95abc753 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2911,7 +2911,7 @@ static int qeth_init_input_buffer(struct qeth_card *card,
}
/*
- * since the buffer is accessed only from the input_tasklet
+ * since the buffer is accessed only from the input_work
* there shouldn't be a need to synchronize; also, since we use
* the QETH_IN_BUF_REQUEUE_THRESHOLD we should never run out off
* buffers
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 8cbc5e1711af..407590697c66 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -13,6 +13,7 @@
#include <linux/lockdep.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/workqueue.h>
#include "zfcp_ext.h"
#include "zfcp_qdio.h"
@@ -72,9 +73,9 @@ static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err,
zfcp_qdio_handler_error(qdio, "qdireq1", qdio_err);
}
-static void zfcp_qdio_request_tasklet(struct tasklet_struct *tasklet)
+static void zfcp_qdio_request_work(struct work_struct *work)
{
- struct zfcp_qdio *qdio = from_tasklet(qdio, tasklet, request_tasklet);
+ struct zfcp_qdio *qdio = from_work(qdio, work, request_work);
struct ccw_device *cdev = qdio->adapter->ccw_device;
unsigned int start, error;
int completed;
@@ -104,7 +105,7 @@ static void zfcp_qdio_request_timer(struct timer_list *timer)
{
struct zfcp_qdio *qdio = from_timer(qdio, timer, request_timer);
- tasklet_schedule(&qdio->request_tasklet);
+ queue_work(system_bh_wq, &qdio->request_work);
}
static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err,
@@ -158,15 +159,15 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err,
zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdires2");
}
-static void zfcp_qdio_irq_tasklet(struct tasklet_struct *tasklet)
+static void zfcp_qdio_irq_work(struct work_struct *work)
{
- struct zfcp_qdio *qdio = from_tasklet(qdio, tasklet, irq_tasklet);
+ struct zfcp_qdio *qdio = from_work(qdio, work, irq_work);
struct ccw_device *cdev = qdio->adapter->ccw_device;
unsigned int start, error;
int completed;
if (atomic_read(&qdio->req_q_free) < QDIO_MAX_BUFFERS_PER_Q)
- tasklet_schedule(&qdio->request_tasklet);
+ queue_work(system_bh_wq, &qdio->request_work);
/* Check the Response Queue: */
completed = qdio_inspect_input_queue(cdev, 0, &start, &error);
@@ -178,14 +179,14 @@ static void zfcp_qdio_irq_tasklet(struct tasklet_struct *tasklet)
if (qdio_start_irq(cdev))
/* More work pending: */
- tasklet_schedule(&qdio->irq_tasklet);
+ queue_work(system_bh_wq, &qdio->irq_work);
}
static void zfcp_qdio_poll(struct ccw_device *cdev, unsigned long data)
{
struct zfcp_qdio *qdio = (struct zfcp_qdio *) data;
- tasklet_schedule(&qdio->irq_tasklet);
+ queue_work(system_bh_wq, &qdio->irq_work);
}
static struct qdio_buffer_element *
@@ -315,7 +316,7 @@ int zfcp_qdio_send(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
/*
* This should actually be a spin_lock_bh(stat_lock), to protect against
- * Request Queue completion processing in tasklet context.
+ * Request Queue completion processing in work context.
* But we can't do so (and are safe), as we always get called with IRQs
* disabled by spin_lock_irq[save](req_q_lock).
*/
@@ -339,7 +340,7 @@ int zfcp_qdio_send(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
}
if (atomic_read(&qdio->req_q_free) <= 2 * ZFCP_QDIO_MAX_SBALS_PER_REQ)
- tasklet_schedule(&qdio->request_tasklet);
+ queue_work(system_bh_wq, &qdio->request_work);
else
timer_reduce(&qdio->request_timer,
jiffies + msecs_to_jiffies(ZFCP_QDIO_REQUEST_SCAN_MSECS));
@@ -406,8 +407,8 @@ void zfcp_qdio_close(struct zfcp_qdio *qdio)
wake_up(&qdio->req_q_wq);
- tasklet_disable(&qdio->irq_tasklet);
- tasklet_disable(&qdio->request_tasklet);
+ disable_work_sync(&qdio->irq_work);
+ disable_work_sync(&qdio->request_work);
del_timer_sync(&qdio->request_timer);
qdio_stop_irq(adapter->ccw_device);
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
@@ -511,11 +512,11 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio)
atomic_or(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
/* Enable processing for Request Queue completions: */
- tasklet_enable(&qdio->request_tasklet);
+ enable_and_queue_work(system_bh_wq, &qdio->request_work);
/* Enable processing for QDIO interrupts: */
- tasklet_enable(&qdio->irq_tasklet);
+ enable_and_queue_work(system_bh_wq, &qdio->irq_work);
/* This results in a qdio_start_irq(): */
- tasklet_schedule(&qdio->irq_tasklet);
+ queue_work(system_bh_wq, &qdio->irq_work);
zfcp_qdio_shost_update(adapter, qdio);
@@ -534,8 +535,8 @@ void zfcp_qdio_destroy(struct zfcp_qdio *qdio)
if (!qdio)
return;
- tasklet_kill(&qdio->irq_tasklet);
- tasklet_kill(&qdio->request_tasklet);
+ cancel_work_sync(&qdio->irq_work);
+ cancel_work_sync(&qdio->request_work);
if (qdio->adapter->ccw_device)
qdio_free(qdio->adapter->ccw_device);
@@ -563,10 +564,10 @@ int zfcp_qdio_setup(struct zfcp_adapter *adapter)
spin_lock_init(&qdio->req_q_lock);
spin_lock_init(&qdio->stat_lock);
timer_setup(&qdio->request_timer, zfcp_qdio_request_timer, 0);
- tasklet_setup(&qdio->irq_tasklet, zfcp_qdio_irq_tasklet);
- tasklet_setup(&qdio->request_tasklet, zfcp_qdio_request_tasklet);
- tasklet_disable(&qdio->irq_tasklet);
- tasklet_disable(&qdio->request_tasklet);
+ INIT_WORK(&qdio->irq_work, zfcp_qdio_irq_work);
+ INIT_WORK(&qdio->request_work, zfcp_qdio_request_work);
+ disable_work_sync(&qdio->irq_work);
+ disable_work_sync(&qdio->request_work);
adapter->qdio = qdio;
return 0;
@@ -580,7 +581,7 @@ int zfcp_qdio_setup(struct zfcp_adapter *adapter)
* wrapper function sets a flag to ensure hardware logging is only
* triggered once before going through qdio shutdown.
*
- * The triggers are always run from qdio tasklet context, so no
+ * The triggers are always run from qdio work context, so no
* additional synchronization is necessary.
*/
void zfcp_qdio_siosl(struct zfcp_adapter *adapter)
diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h
index 8f7d2ae94441..ce92d2378b98 100644
--- a/drivers/s390/scsi/zfcp_qdio.h
+++ b/drivers/s390/scsi/zfcp_qdio.h
@@ -11,6 +11,7 @@
#define ZFCP_QDIO_H
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
#include <asm/qdio.h>
#define ZFCP_QDIO_SBALE_LEN PAGE_SIZE
@@ -30,8 +31,8 @@
* @req_q_util: used for accounting
* @req_q_full: queue full incidents
* @req_q_wq: used to wait for SBAL availability
- * @irq_tasklet: used for QDIO interrupt processing
- * @request_tasklet: used for Request Queue completion processing
+ * @irq_work: used for QDIO interrupt processing
+ * @request_work: used for Request Queue completion processing
* @request_timer: used to trigger the Request Queue completion processing
* @adapter: adapter used in conjunction with this qdio structure
* @max_sbale_per_sbal: qdio limit per sbal
@@ -48,8 +49,8 @@ struct zfcp_qdio {
u64 req_q_util;
atomic_t req_q_full;
wait_queue_head_t req_q_wq;
- struct tasklet_struct irq_tasklet;
- struct tasklet_struct request_tasklet;
+ struct work_struct irq_work;
+ struct work_struct request_work;
struct timer_list request_timer;
struct zfcp_adapter *adapter;
u16 max_sbale_per_sbal;
--
2.17.1
More information about the linux-riscv
mailing list