[PATCH v1 5/5] riscv: dts: microchip: add an initial devicetree for the BeagleV Fire
Conor Dooley
conor at kernel.org
Wed Mar 27 05:24:40 PDT 2024
From: Conor Dooley <conor.dooley at microchip.com>
Add an initial devicetree for the BeagleV Fire. This devicetree differs
from that in the BeagleBoard BSP as it has a different memory
configuration, however it will boot on the same FPGA images. PCI is
disabled for now, as the Linux PCI driver (and the binding) assume
which root port instance is in use. This will need to be fixed before
PCI can be enabled.
Link: https://www.beagleboard.org/boards/beaglev-fire
Co-developed-by: Jamie Gibbons <jamie.gibbons at microchip.com>
Signed-off-by: Jamie Gibbons <jamie.gibbons at microchip.com>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
arch/riscv/boot/dts/microchip/Makefile | 1 +
.../microchip/mpfs-beaglev-fire-fabric.dtsi | 124 ++++++++++
.../boot/dts/microchip/mpfs-beaglev-fire.dts | 223 ++++++++++++++++++
3 files changed, 348 insertions(+)
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index e177815bf1a2..f51aeeb9fd3b 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi
new file mode 100644
index 000000000000..0abd0dc540be
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ fabric-bus at 40000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */
+ <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */
+ <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */
+ <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */
+ <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */
+
+ cape_gpios_p8: gpio at 41100000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x41100000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <16>;
+ gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34",
+ "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38",
+ "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42",
+ "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46";
+ };
+
+ cape_gpios_p9: gpio at 41200000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x41200000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <20>;
+ gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14",
+ "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18",
+ "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24",
+ "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28",
+ "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42";
+ };
+
+ hsi_gpios: gpio at 44000000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x44000000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <20>;
+ gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N",
+ "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P",
+ "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID",
+ "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID",
+ "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID",
+ "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK",
+ "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N";
+ };
+ };
+
+ fabric-pcie-bus at 3000000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>,
+ <0x30 0x0 0x30 0x0 0x10 0x0>;
+
+ pcie: pcie at 3000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x30 0x0 0x0 0x8000000>,
+ <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>,
+ <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic1", "fic3";
+ ranges = <0x43000000 0x0 0x9000000 0x30 0x9000000 0x0 0xf000000>,
+ <0x1000000 0x0 0x8000000 0x30 0x8000000 0x0 0x1000000>,
+ <0x3000000 0x0 0x18000000 0x30 0x18000000 0x0 0x70000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
+
+ refclk_ccc: cccrefclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
+
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
new file mode 100644
index 000000000000..47cf693beb68
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mpfs.dtsi"
+#include "mpfs-beaglev-fire-fabric.dtsi"
+
+/* Clock frequency (in Hz) of MTIMER */
+#define MTIMER_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "BeagleBoard BeagleV-Fire";
+ compatible = "beagle,beaglev-fire", "microchip,mpfs";
+
+ aliases {
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ ddrc_cache_lo: memory at 80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ status = "okay";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hss: hss-buffer at 103fc00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10 0x3fc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ imx219_clk: camera-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ imx219_vana: fixedregulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vana";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ imx219_vdig: fixedregulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vdig";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ imx219_vddl: fixedregulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vddl";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+};
+
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ ngpios=<32>;
+ gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
+ "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
+ "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
+ "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11",
+ "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20",
+ "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26",
+ "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1",
+ "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET";
+ status = "okay";
+
+ vio-enable-hog {
+ gpio-hog;
+ gpios = <30 30>;
+ output-high;
+ line-name = "VIO_ENABLE";
+ };
+
+ sd-det-hog {
+ gpio-hog;
+ gpios = <31 31>;
+ input;
+ line-name = "SD_DET";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom: eeprom at 50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ imx219: sensor at 10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+ clocks = <&imx219_clk>;
+ VANA-supply = <&imx219_vana>; /* 2.8v */
+ VDIG-supply = <&imx219_vdig>; /* 1.8v */
+ VDDL-supply = <&imx219_vddl>; /* 1.2v */
+
+ port {
+ imx219_0: endpoint {
+ data-lanes = <1 2>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&mmuart0 {
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ microchip,bitstream-flash = <&sys_ctrl_flash>;
+ status = "okay";
+};
+
+&syscontroller_qspi {
+ status = "okay";
+
+ sys_ctrl_flash: flash at 0 { // MT25QL01GBBB8ESF-0SIT
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.43.0
More information about the linux-riscv
mailing list