[External] [PATCH v6 08/13] riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
yunhui cui
cuiyunhui at bytedance.com
Tue Mar 26 23:27:22 PDT 2024
Hi Samuel,
On Wed, Mar 27, 2024 at 12:51 PM Samuel Holland
<samuel.holland at sifive.com> wrote:
>
> Implementations affected by SiFive errata CIP-1200 have a bug which
> forces the kernel to always use the global variant of the sfence.vma
> instruction. When affected by this errata, do not attempt to flush a
> range of addresses; each iteration of the loop would actually flush the
> whole TLB instead. Instead, minimize the overall number of sfence.vma
> instructions.
>
> Signed-off-by: Samuel Holland <samuel.holland at sifive.com>
> ---
>
> Changes in v6:
> - Clarify the commit message for patch 8 based on ML discussion
>
> Changes in v4:
> - Only set tlb_flush_all_threshold when CONFIG_MMU=y.
>
> Changes in v3:
> - New patch for v3
>
> arch/riscv/errata/sifive/errata.c | 5 +++++
> arch/riscv/include/asm/tlbflush.h | 2 ++
> arch/riscv/mm/tlbflush.c | 2 +-
> 3 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/errata/sifive/errata.c b/arch/riscv/errata/sifive/errata.c
> index 3d9a32d791f7..716cfedad3a2 100644
> --- a/arch/riscv/errata/sifive/errata.c
> +++ b/arch/riscv/errata/sifive/errata.c
> @@ -42,6 +42,11 @@ static bool errata_cip_1200_check_func(unsigned long arch_id, unsigned long imp
> return false;
> if ((impid & 0xffffff) > 0x200630 || impid == 0x1200626)
> return false;
> +
> +#ifdef CONFIG_MMU
> + tlb_flush_all_threshold = 0;
> +#endif
> +
> return true;
> }
>
> diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
> index 463b615d7728..8e329721375b 100644
> --- a/arch/riscv/include/asm/tlbflush.h
> +++ b/arch/riscv/include/asm/tlbflush.h
> @@ -66,6 +66,8 @@ void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
> unsigned long uaddr);
> void arch_flush_tlb_batched_pending(struct mm_struct *mm);
> void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
> +
> +extern unsigned long tlb_flush_all_threshold;
> #else /* CONFIG_MMU */
> #define local_flush_tlb_all() do { } while (0)
> #endif /* CONFIG_MMU */
> diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
> index ad7bdcfcc219..18af7b5053af 100644
> --- a/arch/riscv/mm/tlbflush.c
> +++ b/arch/riscv/mm/tlbflush.c
> @@ -11,7 +11,7 @@
> * Flush entire TLB if number of entries to be flushed is greater
> * than the threshold below.
> */
> -static unsigned long tlb_flush_all_threshold __read_mostly = 64;
> +unsigned long tlb_flush_all_threshold __read_mostly = 64;
>
> static void local_flush_tlb_range_threshold_asid(unsigned long start,
> unsigned long size,
> --
> 2.43.1
>
Reviewed-by: Yunhui Cui <cuiyunhui at bytedance.com>
Thanks,
Yunhui
More information about the linux-riscv
mailing list