[PATCH v3 1/1] dt-bindings: net: starfive,jh7110-dwmac: Add StarFive JH8100 support
ChunHau Tan
chunhau.tan at starfivetech.com
Mon Mar 25 22:24:54 PDT 2024
> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: Tuesday, 26 March, 2024 12:23 AM
> To: ChunHau Tan <chunhau.tan at starfivetech.com>
> Cc: David S . Miller <davem at davemloft.net>; Eric Dumazet
> <edumazet at google.com>; Jakub Kicinski <kuba at kernel.org>; Paolo Abeni
> <pabeni at redhat.com>; Emil Renner Berthing <kernel at esmil.dk>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Conor Dooley
> <conor+dt at kernel.org>; Maxime Coquelin <mcoquelin.stm32 at gmail.com>;
> Alexandre Torgue <alexandre.torgue at foss.st.com>; Simon Horman
> <horms at kernel.org>; Bartosz Golaszewski <bartosz.golaszewski at linaro.org>;
> Andrew Halaney <ahalaney at redhat.com>; Jisheng Zhang <jszhang at kernel.org>;
> Uwe Kleine-König <u.kleine-koenig at pengutronix.de>; Russell King
> <rmk+kernel at armlinux.org.uk>; Leyfoon Tan <leyfoon.tan at starfivetech.com>;
> JeeHeng Sia <jeeheng.sia at starfivetech.com>; netdev at vger.kernel.org;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> linux-stm32 at st-md-mailman.stormreply.com;
> linux-arm-kernel at lists.infradead.org; linux-riscv at lists.infradead.org
> Subject: Re: [PATCH v3 1/1] dt-bindings: net: starfive,jh7110-dwmac: Add
> StarFive JH8100 support
>
> On Mon, Mar 25, 2024 at 01:51:31AM -0700, Tan Chun Hau wrote:
> > Add StarFive JH8100 dwmac support.
> > The JH8100 dwmac shares the same driver code as the JH7110 dwmac and
> > has only one reset signal.
> >
> > Please refer to below:
> >
> > JH8100: reset-names = "stmmaceth";
> > JH7110: reset-names = "stmmaceth", "ahb";
>
> It's debatable whether JH8100 is compatible with JH7110 if the 2nd reset was
> not optional. I guess if the Linux driver treated it that way, we can get away with
> it. It would simplify the conditionals in the schema if the t also treated the
> 2nd entry as optional on JH7110 as well.
Yes, Linux driver and snps,dwmac.yaml treated it that way.
please refer to
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/net/snps%2Cdwmac.yaml#L143
>
> > JH7100: reset-names = "ahb";
> >
> > Example usage of JH8100 in the device tree:
> >
> > gmac0: ethernet at 16030000 {
> > compatible = "starfive,jh8100-dwmac",
> > "starfive,jh7110-dwmac",
> > "snps,dwmac-5.20";
> > ...
> > };
> >
> > Signed-off-by: Tan Chun Hau <chunhau.tan at starfivetech.com>
> > ---
> > .../devicetree/bindings/net/snps,dwmac.yaml | 1 +
> > .../bindings/net/starfive,jh7110-dwmac.yaml | 82 +++++++++++++------
> > 2 files changed, 58 insertions(+), 25 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > index 6b0341a8e0ea..a6d596b7dcf4 100644
> > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > @@ -97,6 +97,7 @@ properties:
> > - snps,dwxgmac-2.10
> > - starfive,jh7100-dwmac
> > - starfive,jh7110-dwmac
> > + - starfive,jh8100-dwmac
> >
> > reg:
> > minItems: 1
> > diff --git
> > a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> > b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> > index 0d1962980f57..da3cc984fec9 100644
> > --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> > @@ -18,6 +18,7 @@ select:
> > enum:
> > - starfive,jh7100-dwmac
> > - starfive,jh7110-dwmac
> > + - starfive,jh8100-dwmac
> > required:
> > - compatible
> >
> > @@ -30,6 +31,10 @@ properties:
> > - items:
> > - const: starfive,jh7110-dwmac
> > - const: snps,dwmac-5.20
> > + - items:
> > + - const: starfive,jh8100-dwmac
> > + - const: starfive,jh7110-dwmac
> > + - const: snps,dwmac-5.20
> >
> > reg:
> > maxItems: 1
> > @@ -83,29 +88,13 @@ allOf:
> > - if:
> > properties:
> > compatible:
> > - contains:
> > - const: starfive,jh7100-dwmac
> > - then:
> > - properties:
> > - interrupts:
> > - minItems: 2
> > - maxItems: 2
> > -
> > - interrupt-names:
> > - minItems: 2
> > - maxItems: 2
> > -
> > - resets:
> > - maxItems: 1
> > -
> > - reset-names:
> > - const: ahb
> > -
> > - - if:
> > - properties:
> > - compatible:
> > - contains:
> > - const: starfive,jh7110-dwmac
> > + allOf:
> > + - contains:
> > + enum:
> > + - starfive,jh8100-dwmac
> > + - contains:
> > + enum:
> > + - starfive,jh7110-dwmac
>
> There's no need for the 2nd entry. You just need to check
>
> I would something like this structure:
>
> - if:
> properties:
> compatible:
> contains:
> const: starfive,jh7100-dwmac
>
> then:
>
> if:
> properties:
> compatible:
> contains:
> const: starfive,jh8100-dwmac
> then:
> ...
> else:
> ...
>
Okay, thank you for the feedback.
> > then:
> > properties:
> > interrupts:
> > @@ -117,10 +106,53 @@ allOf:
> > maxItems: 3
> >
> > resets:
> > - minItems: 2
> > + maxItems: 1
> >
> > reset-names:
> > - minItems: 2
> > + const: stmmaceth
> > +
> > + else:
>
> I don't think you need the else. Just do another 'if' entry.
>
> > + if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: starfive,jh7100-dwmac
> > + then:
> > + properties:
> > + interrupts:
> > + minItems: 2
> > + maxItems: 2
> > +
> > + interrupt-names:
> > + minItems: 2
> > + maxItems: 2
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + reset-names:
> > + const: ahb
> > +
> > + if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: starfive,jh7110-dwmac
> > + then:
> > + properties:
> > + interrupts:
> > + minItems: 3
> > + maxItems: 3
> > +
> > + interrupt-names:
> > + minItems: 3
> > + maxItems: 3
> > +
> > + resets:
> > + minItems: 2
> > +
> > + reset-names:
> > + minItems: 2
> >
> > unevaluatedProperties: false
> >
> > --
> > 2.25.1
> >
More information about the linux-riscv
mailing list