[PATCH v5 1/3] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC

[Inochi Amaoto]

On Mon, Mar 25, 2024 at 11:37:44PM -0400, Frank Li wrote:
> On Tue, Mar 26, 2024 at 09:47:03AM +0800, Inochi Amaoto wrote:
> > The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with
> > an additional channel remap register located in the top system control
> > area. The DMA channel is exclusive to each core.
> > 
> > Add the dmamux binding for CV18XX/SG200X series SoC
> > 
> > Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> > ---
> >  .../bindings/dma/sophgo,cv1800-dmamux.yaml    | 48 ++++++++++++++++
> >  include/dt-bindings/dma/cv1800-dma.h          | 55 +++++++++++++++++++
> 
> I remember checkpatch.pl require .h have seperate patch.
> 
> Frank

checkpatch.pl does not give warning like this.

> 
> >  2 files changed, 103 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
> >  create mode 100644 include/dt-bindings/dma/cv1800-dma.h
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
> > new file mode 100644
> > index 000000000000..d7256646ea26
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
> > @@ -0,0 +1,48 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo CV1800/SG200 Series DMA mux
> > +
> > +maintainers:
> > +  - Inochi Amaoto <inochiama at outlook.com>
> > +
> > +allOf:
> > +  - $ref: dma-router.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: sophgo,cv1800-dmamux
> > +
> > +  reg:
> > +    items:
> > +      - description: DMA channal remapping register
> > +      - description: DMA channel interrupt mapping register
> > +
> 
> Look like driver have not use it.
> 

The driver uses syscon offset to access the registers. This dmamux is
a subdevice of syscon.
And this properity, suggested by Rob, is just used to keep DT complete.

> Frank
> 
> > +  '#dma-cells':
> > +    const: 2
> > +    description:
> > +      The first cells is device id. The second one is the cpu id.
> > +
> > +  dma-masters:
> > +    maxItems: 1
> > +
> > +  dma-requests:
> > +    const: 8
> > +
> > +required:
> > +  - '#dma-cells'
> > +  - dma-masters
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    dma-router {
> > +      compatible = "sophgo,cv1800-dmamux";
> > +      #dma-cells = <2>;
> > +      dma-masters = <&dmac>;
> > +      dma-requests = <8>;
> > +    };
> > diff --git a/include/dt-bindings/dma/cv1800-dma.h b/include/dt-bindings/dma/cv1800-dma.h
> > new file mode 100644
> > index 000000000000..3ce9dac25259
> > --- /dev/null
> > +++ b/include/dt-bindings/dma/cv1800-dma.h
> > @@ -0,0 +1,55 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +
> > +#ifndef __DT_BINDINGS_DMA_CV1800_H__
> > +#define __DT_BINDINGS_DMA_CV1800_H__
> > +
> > +#define DMA_I2S0_RX		0
> > +#define DMA_I2S0_TX		1
> > +#define DMA_I2S1_RX		2
> > +#define DMA_I2S1_TX		3
> > +#define DMA_I2S2_RX		4
> > +#define DMA_I2S2_TX		5
> > +#define DMA_I2S3_RX		6
> > +#define DMA_I2S3_TX		7
> > +#define DMA_UART0_RX		8
> > +#define DMA_UART0_TX		9
> > +#define DMA_UART1_RX		10
> > +#define DMA_UART1_TX		11
> > +#define DMA_UART2_RX		12
> > +#define DMA_UART2_TX		13
> > +#define DMA_UART3_RX		14
> > +#define DMA_UART3_TX		15
> > +#define DMA_SPI0_RX		16
> > +#define DMA_SPI0_TX		17
> > +#define DMA_SPI1_RX		18
> > +#define DMA_SPI1_TX		19
> > +#define DMA_SPI2_RX		20
> > +#define DMA_SPI2_TX		21
> > +#define DMA_SPI3_RX		22
> > +#define DMA_SPI3_TX		23
> > +#define DMA_I2C0_RX		24
> > +#define DMA_I2C0_TX		25
> > +#define DMA_I2C1_RX		26
> > +#define DMA_I2C1_TX		27
> > +#define DMA_I2C2_RX		28
> > +#define DMA_I2C2_TX		29
> > +#define DMA_I2C3_RX		30
> > +#define DMA_I2C3_TX		31
> > +#define DMA_I2C4_RX		32
> > +#define DMA_I2C4_TX		33
> > +#define DMA_TDM0_RX		34
> > +#define DMA_TDM0_TX		35
> > +#define DMA_TDM1_RX		36
> > +#define DMA_AUDSRC		37
> > +#define DMA_SPI_NAND		38
> > +#define DMA_SPI_NOR		39
> > +#define DMA_UART4_RX		40
> > +#define DMA_UART4_TX		41
> > +#define DMA_SPI_NOR1		42
> > +
> > +#define DMA_CPU_A53		0
> > +#define DMA_CPU_C906_0		1
> > +#define DMA_CPU_C906_1		2
> > +
> > +
> > +#endif // __DT_BINDINGS_DMA_CV1800_H__
> > --
> > 2.44.0
> >