[PATCH v3 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC

[Rob Herring]

On Fri, 15 Mar 2024 10:50:33 +0800, Inochi Amaoto wrote:
> CV18XX/SG200X series SoCs have a special top misc system controller,
> which provides register access for several devices. In addition to
> register access, this system controller also contains some subdevices
> (such as dmamux).
> 
> Add bindings for top misc controller of CV18XX/SG200X series SoC.
> 
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> ---
>  .../soc/sophgo/sophgo,cv1800-top-syscon.yaml  | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dts:25.13-44: Warning (reg_format): /example-0/syscon at 3000000/dma-router at 154:reg: property has invalid length (16 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dts:23.26-29.13: Warning (avoid_default_addr_size): /example-0/syscon at 3000000/dma-router at 154: Relying on default #address-cells value
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dts:23.26-29.13: Warning (avoid_default_addr_size): /example-0/syscon at 3000000/dma-router at 154: Relying on default #size-cells value
Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.example.dtb: dma-router at 154: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/IA1PR20MB4953D930316266781A229E97BB282@IA1PR20MB4953.namprd20.prod.outlook.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.